How to replace the desktop case tower

I recently bought a refurbished ENVY 700 series desktop computer, it's in great condition. Unfortunately, I accidently dropped it and cracked the front cover of the case tower.
I love the case design, but I don't want to have a cracked case in the rest her lifespan. Is there any chance I can replace it? Or can I order a case tower only (without mobo, hdd, dvd, etc.)?
This question was solved.
View Solution.

Hi,
You can buy many cases around, many shapes and sizes the main thing is looking for the form factor of the motherboard to be able to line up all holes for screws. Sorry I don't know what is the model/product of your ENVY 700 therefore I can't say its form factor, it can/can't be:
Manufacturer: MSI
Form factor: uATX: 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset: Intel Z87
Memory sockets: 4 x DDR3
Processor socket: LGA1150
Expansion Slots:
1 PCI Express x16 (Gen3.0)
3 PCI Express x1 (Gen2.0)
1 half-length mini card
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How can replace the aluminum case of the mac book air and how much would cost?

How can I replace a mac book air aluminum case and how much would it cost?

The entire case, meaning the back, front, and display enclosure? As much as a new MBA.

Replacing the bottom case on my 1.33 PB

I just replaced the screen on my PB.I just picked up a mint condition bottom case
{My bottom case is in bad shape} I checked my iFixit.com and cannot find a guide on how to replace the bottom case.Any ideas? Thanks

Cornelius-
I forgot to say that usually I put full links because it's easier for people to see that what's being posted is a link that they need to go to. Also helps them visualize what the link is for future reference. I know you've seen some of my old posts where I do utilize embedded links instead of putting the huge/long web addresses.
For instance, I could easily say, "Go look at this LINK for more info." They'd click on the word thread and never make a connection. Some may miss it altogether, overlooking the fact that it is a link. Those that notice it won't have a reference point going into the page. It'd be better to have something to look at.
Like, go to this link for more information:
http://discussions.apple.com/thread.jspa?messageID=6454427
Or even, see the following link, "Thermal Paste Thermal Tape Question Logic Board" for more information.
You can see that in this, case, the link doesn't really present an issue because it's not long. And I don't think, for the times I haven't used the HREF method, that I've put drastically long links that wrap the page. (Also, I e-mailed you earlier about something, in case you don't check, if you know what I mean).
=)
Message was edited by: Pismo 900
By the way, that thread may be of help when replacing the bottom case, since you'll need thermal paste and Kapton tape on hand, even a spudger--Apple "black stick"--during the installation process.
(And we might be reminded, you and I, of going off topic. And we wouldn't want that now, would we?).

Qosmio G50-10J: How to replace the Optical Disc Drive (ODD)?

Hello there,
the optical drive of my Qosmio G 50 is not working properly anymore, it reads only some movie-DVDs, but sadly no videogameDVDs at all, so I cannot instal any games.
The warranty has already expired too. So I wanted to ask if it is possible to change the drive myself, if it is then how should I do it, and if by doing it would the laptop be in
serious risk of getting damaged?
I would be very thankful for every tip and every help you guys can give me!!!
Best regards,
a.z.

Hi
In different cases the ODD replacement is not very tricky.
If you want you can check this forum category.
Here you can find some videos how to replace the ODD on different notebook models:
http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=115
Here is also a nice Youtube channel which provides the instructions how to replace the ODD:
http://www.youtube.com/user/toshibaeuropesupport
But maybe the ODD laser lens is dirty. In my case I could solve similar issue cleaning the laser lens using a cotton-wool tip and alcohol.
But be careful doing this!

If i want to replace the back case for an iphone 3g and i provide the back case, will Apple do the actual replacement for me?

The black back case on my iphone 3g is cracked. i would like to replace the back case with a new white one. I saw the video on how to do the replacement on youtube and found it complicated. if i take the new back case and the phone to Apple, will the replace the broken back case for me?

Regarding the iPhone 3G, the only repair that Apple Genius does on that device is the Front Screen Replacement. So they could help you get the front assembly back on when you are done with the repair. To give you a better idea, the Genius do not even replace the battery on the iPhone 3G. Apple will not help you with this repair.

Why do we have to replace the top case to replace a keyboard?

I see replacement keyboards sold all over the place online which means they must be able to com apart from the case. If this wasn't possible then why are these parts for sale and who are they intended for? People keep saying that you must replace the top case but you can buy just the keyboard from many sources. Can someone clear this up please? There wouldn't be a market for just the keyboad if you couldn't do it, so it's hard to believe it can't be done.....

Found two places on ifixit that explain how to do this... for anyone that may be looking for the same answer. You do NOT have to replace the entire upper case

I have CS5 on a desktop that died, Replaced the desktop but do not see my download information on my account.

I have CS5 Student/Teacher on a desktop that died. I have replaced the desktop with a new Windows 8 desktop but do not see my download information on my account. This software was originally downloaded directly from Adobe. How do I recover the software and install it on my new PC?

Download and Installation Help -
https://helpx.adobe.com/download-install.html

Replacing the upper case?

I had some problems with a bad tech about a year ago on my MBP (mid 2010, unibody), where one of the rubber feet came off, and I took it into the apple store. They decided to replace them for free for me, but in the process dented the unibody lower case so that the bottom does not fit perfectly. Well, they didn't record this, and then told me I would have to pay to fix it and my computer was out of warranty.
In any case, I have just delt with it since, but now, I was thinking that I may just replace the bottom case myself, but can't seem to find anything to tell me the right way to take it apart so that I don't damage anything. I've found some of the cases, online, for around $100, and when I went to the apple store, they told me it was several hundred dollars.
Besides all of my frustration in this not being my fault, I am trying to decide what is my best course of action here. To buy a case and install it myself, or just to sell it (computer works fine, has Mountain Lion, no damage to screen, just some scratches on the bottom of the case, and the dent mentioned), and buy a newer one. Just not sure how much I would get for it, now.

Lower case/ feet: http://support.apple.com/kb/HT5236
upper case youtube: http://www.youtube.com/watch?v=B3oGp1IaQIM
uppercase ifixit: http://www.ifixit.com/Guide/Replacing+MacBook+Pro+15-Inch+Unibody+Mid+2010+Upper +Case/3105/1
sell your Mac: http://www.sellyourmac.com/sell-your-used-mac.html

How to replace the root tag in ABAP Mapping

how to replace the root tag with the certain string in ABAP Mapping
just like
<?xml version="1.0" encoding="UTF-8"?>
<root>
<name>Lawrence</name>
</root>
into
<?xml version="1.0" encoding="UTF-8"?>
<myRootElement>
<name>Lawrence</name>
</myRootElement>
i don't want to implement it in message mapping
please give me the sample code
thanks in advance

Use below code
odocument = ixmlfactory->create_document( ).
msgtype = odocument->create_simple_element(
name = 'myRootElement'
parent = odocument ).
Thanks
Praveen

Satallite A100: How to replace the keycaps?

Is there a manual on how to replace the keycaps after they come off?
My Satallite A100, one year old, lost two keycaps a few weeks ago, and I am unable to replace them, although I have all the (little) parts. It got even worse when some more came loose recently when my little son peeled some off, using the room created by the already missing keycaps.
Thanks!

Hello Mike
Reading your posting I can not understand exactly what is wrong with your keyboard but removing and putting in place keycaps (plastic with written symbol) is not problematic. You must just put it right in place and gently press it down. You will hear click and the keycap will be in the place again.
Under this keycap is placed small plastic mechanism. It contains two small plastic parts. If they are removed from the bottom you can put them inside again. To see how it looks like remove keycap from any other key and see how is it placed.
I have done the same now and with a little bit patience you can put it in the right position again.

After replace the ATX case for K7T Turbo2 mainboard???

hi, Master outhere help plz...
after replace the ATX case for K7T Turbo2 mainboard??? why not boot up on screen any more , but power running is ok for the CPU fan , if i forgot any thing from this stage plz guide me the step.
thank for kindly supports soon...

psu max amps better than in old case ?
got to many stand offs under the board shorting it out ?

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

How to replace the char values into numeric in my string?

Hi Friends,
I would like to Replace the Charecter values with numeric value in my string.
Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
I mean How to replace the char values into numeric in my string?
Thanks,
Sridhar

Hi Sridhar,
I would like to Replace the Charecter values with numeric value in my string.
Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
So, if i understand you correctly, you want to replace all characters in a string with 9 as in the above example, irrespective of position of the character, if so try with the below code.
DATA: l_str TYPE string.
l_str = 'ASKHSIUDNSBDKJSDH124312431243124saasdfsf'.
REPLACE ALL OCCURRENCES OF REGEX '\D' IN l_str WITH '9'.
IF sy-subrc EQ 0.
WRITE: l_str. "Result will be 9999999999999999912431243124312499999999
ENDIF.
Regards,
Chen
Edited by: Chen K V on Jun 13, 2011 12:36 PM

Hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

Hp india have bad service ever. I hv order three notebooks ' hp 15-ac026tx' before five days for firm. Distributior open the boxes. But at the time of installation not single driver supporting to 2gb graphics card. As distributor made with Hp support they replied the engineer will come to ur place soon. But still no one has come. And im going to cancel this order and will prefer other compony.

Replaced the bottom case on MBP (2006)...now screen is blank!? Need help ASAP...please!

I just replaced the bottom case on my 2006 MBP (model A1211). I previously replaced the top case, optical, and disk drives and all has been running as good as new for months. I used the instructions on ifixit.com to replace the bottom case, following the instructions exactly. Now when I go to turn the computer on, the screen doesn't turn on. I thought maybe a connection or screw was loose, so I disconnected and reconnected everything. All connections are tight, no screws are loose or missing. What am *I* missing??

Nothing at all, guys? This has to be fairly common and I'm just missing something obvious?

How to replace the desktop case tower

Similar Messages

Maybe you are looking for