How to replace the hinge for g410?

How do I replace the g410 hinges myself?

due to lenovo didn't provide any hardware maintenance manual, i don't think i'll be able to help you.

Similar Messages

How to replace the printhead for the Officejet Pro L7580

I need a video for first cleaning the printhead and the replacing(if necessary) the printhead(s) for the L7580. I found a video for the 8500, but it did not help. I do not see a release latch for my printhead

Hello,
Please check the link scroll down to solution 6 which has video to replace printhead.
http://support.hp.com/us-en/document/c01957673/
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
I work for HP but my posts and replies are my own.
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else .....

How much to replace the shutter for the Canon 6D?

I heard some place online said the cost for replace shutter for Canon 5D Mark 2 is about $250, and someone else mentioned to replace the shutter for Canon 6D is about $150.
Can anyone here tell how much is it cost to replace the shutter for canon 6D from Canon Serivce?
thanks.

As ebiggs has already hinted... it would be extremely surprising if a shutter on a 6D has already failed given the number of shutter activations that these things are rated to take (it would normally take a very active photography many years to wear out a shutter and a casual photographer would be unlikely to ever wear out a shutter.)
This makes me wonder why you think your shutter has failed. Perhaps there is a different issue that might be more easily remedied.
Tim Campbell
5D II, 5D III, 60Da

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

How much is the cost for replacing iphone 4 display?

how much is the cost for replacing iphone 4 display?

Apple will replace it, and the replacement comes with a 90-day warranty.
There are some legitimate, high quality repair centers that often can fix phones for less than replacement cost and offer at least 90 warranty...
Or maybe the OP knows that the broken display is not covered under warranty, which is why he was asking for the cost, but he still may have a warranty that just wouldn't cover him in this case.
The warranty is all or none. If the phone were damaged so as to void warranty coverage on the display, there is no remaining warranty on the rest of the device.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Qosmio G50-10J: How to replace the Optical Disc Drive (ODD)?

Hello there,
the optical drive of my Qosmio G 50 is not working properly anymore, it reads only some movie-DVDs, but sadly no videogameDVDs at all, so I cannot instal any games.
The warranty has already expired too. So I wanted to ask if it is possible to change the drive myself, if it is then how should I do it, and if by doing it would the laptop be in
serious risk of getting damaged?
I would be very thankful for every tip and every help you guys can give me!!!
Best regards,
a.z.

Hi
In different cases the ODD replacement is not very tricky.
If you want you can check this forum category.
Here you can find some videos how to replace the ODD on different notebook models:
http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=115
Here is also a nice Youtube channel which provides the instructions how to replace the ODD:
http://www.youtube.com/user/toshibaeuropesupport
But maybe the ODD laser lens is dirty. In my case I could solve similar issue cleaning the laser lens using a cotton-wool tip and alcohol.
But be careful doing this!

How much is the cost for apple to change ipad 3 digitizer screen glass?

hi, i like to know how much apple will charge me to change the ipad 3 wifi+data digitizer screen glass for a new one?

Apple does not repair iPads, but will replace the entire iPad for a flat fee; see the Repair Pricing section here:
http://www.apple.com/support/ipad/service/faq/
There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair". Note, though, that if you elect to have the iPad serviced by an unauthorized shop, all further warranty will be void.
Regards.

If my iphone 3g screen has smashed and my phone is out of warranty. will apple be able to replace the phone for me or repair the screen?

if my iphone 3g screen has smashed and my phone is out of warranty. will apple be able to replace the phone for me or repair the screen?
i heard apple can upgrade my phone if a pay a specific amount? is this correct?
also if my phone is out of warranty how much would it cost for it to be replaced?

Apple does not repair smashed phones. It will replace the phone with another iPhone 3G as an out of warranty exchange for 199.00 USD.
You should check with your carrier to see if you are eligible for a subsidized iPhone 4. It may cost you the same as the out of warranty replacement for a phone almost 3 generations old.

How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R$ 999.00

How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R $ 999.00

If the device has not been opened by anyone (other than Apple) then it can be replaced via the Out of Warranty replacement program, $269US for the 5, 5C, and 5S?
If it has been opened by anyone other than Apple, purchase a new device.

Hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

Hp india have bad service ever. I hv order three notebooks ' hp 15-ac026tx' before five days for firm. Distributior open the boxes. But at the time of installation not single driver supporting to 2gb graphics card. As distributor made with Hp support they replied the engineer will come to ur place soon. But still no one has come. And im going to cancel this order and will prefer other compony.

Camcast home system....replacing the battery for take over sensor

i just got my home system installed and today I'm getting an error message stating to replace the battery for the takeover sensor. Can someone tell me which piece of equipment this is and how to replace the battery? thanks

Rjmmoon,
Did you have a previous security system? The take over module is used to convert existing wired sensor modules to a Xigbee compatible system that Xfinity Home uses. There should be a box somewhere that all the previous hardware wires into.
Chris

How much is the max for ram on my pavilion dv600?

Hi there, how much is the max for ram on my pavilion dv6000? is the dv6308nr, it has vista-32 bit, but I want to upgrade to 7-64 bit, thanks a lot. Hugo
This question was solved.
View Solution.

Hi:
...and make sure if you want to update the BIOS, do so BEFORE you install W7, or you will brick the notebook if you flash the BIOS afterward.
Everybody sees this release note after they install Windows 7, and they flash the BIOS.
System requirements:
Operating Systems
Microsoft Windows XP Home Edition
Microsoft Windows XP Media Center Edition
Microsoft Windows XP Professional
Microsoft Windows Vista Home Basic 32 Edition
Microsoft Windows Vista Home Premium 32 Edition
Microsoft Windows Vista Home Basic 64 Edition
Microsoft Windows Vista Home Premium 64 Edition
Released:
2010-04-06
Version:
F.43
Compatibility:
Microsoft Windows Vista, Microsoft Windows Vista (64-bit), Microsoft Windows XP
Fix/Enhancement:
- Fixes an issue where a message that says to replace the battery is incorrectly displayed when upgrading the operating system to a Microsoft Windows 7 Operating System.
The good news is anyone who flashes the BIOS in a dv6000 or dv9000 notebook after they install windows 7 does not have to worry about the false battery error problem anymore.
The bad news is they need a new notebook PC.
Paul

In VB Programming code -- How to access the formula for suppressing a field

In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
   ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
   iloop = 0
   For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
           If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
               myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
               myTextObject.Text = "new field text goes here"
               mySection.SectionFormat.EnableSuppress = True
               ' Here is where I want to change the formula for the Suppression
            End if
            iloop = iloop + 1
    Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine

How to obtain the license for the mentioned products.

Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
Siva

Thanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.

How to replace the hinge for g410?

Similar Messages

Maybe you are looking for