How to replace the old PO

Hi,expert we have a new supplier to replace the current supplier ,purchase have set the new purchase SA,while when i run MRP ,found the schedule line still in the old SA,no schedule line in the new SA.The new supplier already listed in the source list,and the old SA are un-check in the source list.
Where go wrong for us?

Hi,
The system determines whether an entry in the source list within whose validity period the delivery date of the requisition falls exists for the material. The source in question may be a fixed vendor or an outline agreement (contract or scheduling agreement).
If the source list contains a unique source, the requisition is assigned to that source.
If the source list contains more than one source then it will follow the following logic in the SAP notes:
550014 FAQ: Source determinatn in the material requiremnts
206684 MRP: automatic source determination
There is also a BADI MD_MODIFY_SOURCE so that you can get what you need.
Regards,
Rachel

Similar Messages

I updated to Firefox 4 and it will not work so I can not get on line and it replaced the old firefox so I also lost all my bookmarks. I need them back. How do I get them?

I have a Mc g5 with the 10.4.11 operating system. Your site is my home page and it kept bugging me to update to the firefox 4. So I did now when I try to get on it tells me that that "I can not open this application because it is not supported on this system". It replaced the old firefox that I had so I can not open that. I have no way to get to my book marks and I need them. Let me know how to get back to my old firefox and book marks.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Lost_bookmarks

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Bought a new Canon MG7540 printer to replace the old HP A618. When printing vector objects from Illustrator, they look like graphics from dandy (8 bits) ... no smooth, all cubes ... if do raster than print perfectly. Who knows how to treat it? No well to

Bought a new Canon MG7540 printer to replace the old HP A618. When printing vector objects from Illustrator, they look like graphics from dandy (8 bits) ... no smooth, all cubes ... if do raster than print perfectly. Who knows how to treat it? No well to rasterize vector before each printing. OS - MacOs 10.10.

Have you read the User's Guide for that printer? Odds are you will get reasonable prints. However, it is a photographic printer. That said, it should print excellent quality photographic files. To get smooth lines in Illustrator, try Preferences > Use Anti-Aliased Artwork. That will smoothen the output. If, for some reason, that does not work, try Print > Save As PDF > open PDF in Reader and print from there. Check the User's Guide for media sizes available for your particular printer. Setup your artboard to the size page you want the image to print on. Use View > Show Page Tiling ( to see where the page's printable area lies. Align the page with the artboard using the Page tool.

How can I replace the old commenting system with Disqus?

How can I replace the old commenting system on Business Catalyst with Disqus? Please help

Hi,
The Disqus integration has been done by at least one BC partner – simpleflame.com, on this site: http://kiyuco.com/free-videos . You could reach out to them inquiring for more details on how it has been done.
Kind regards,
-Sidney

How can tell the script I want to save unsaved files but not replace the old one?

Hi everyone
I got this script
var docs = app.documents;
for (var i = docs.length-1; i >= 0; i--) {
    if (docs[i].saved == false) {
        docs[i].save(new File(“~/Desktop/Document.indd”));
        docs[i].close();
    else {
        docs[i].close(SaveOptions.YES);
close and save files
but if I have two or more files, I want to save files like Doc1, Doc2...
the new file will never replace the old one
Can some one tell me how can I do that?
Thanks
Regard
Teetan

Hi,
Change the 4th line like below:
        docs[i].save(new File("~/Desktop/Doc" + (i+1) + ".indd"));
Vandy

How to update table J_1IPART1,without replacing the old values

Helllo Friends
Problem:
When I capture the excisable document in T-code J1IEX, the table J_1IPART1 does not get updated ,but when I do the good receipts by 101,then entry in the above table get updated ,by replacing the previous entry.
What should I do so that table J_1IPART2 hold all the captured values without replacing the old values.
And after what time of interval do I need to update the register, is it on daily bases or on monthly bases

Try these steps:
1. Post MIGO without excise entry
2. J1I5 - Update register for RG23A Part1 with classification ROP.
3. Post excise Invoice through J1IEX
You should update the register on daily basis.

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
If not you can also add a USB drive to the TC, and use that for one of the computers.
The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

Satallite A100: How to replace the keycaps?

Is there a manual on how to replace the keycaps after they come off?
My Satallite A100, one year old, lost two keycaps a few weeks ago, and I am unable to replace them, although I have all the (little) parts. It got even worse when some more came loose recently when my little son peeled some off, using the room created by the already missing keycaps.
Thanks!

Hello Mike
Reading your posting I can not understand exactly what is wrong with your keyboard but removing and putting in place keycaps (plastic with written symbol) is not problematic. You must just put it right in place and gently press it down. You will hear click and the keycap will be in the place again.
Under this keycap is placed small plastic mechanism. It contains two small plastic parts. If they are removed from the bottom you can put them inside again. To see how it looks like remove keycap from any other key and see how is it placed.
I have done the same now and with a little bit patience you can put it in the right position again.

Recently downloaded latest version, will I lose my bookmarks if I replace the old mozilla ?

I'm currently using the 13.0.1.
I just downloaded the latest verison of Firefox.
The new version asks me to replace the old one.
I'm very happy with firefox, but how do I make sure I do not lose my bookmarks and passwords and details stored on my current Firefox.

The new - actually, any - version of Firefox is separate from your profile and from data in it, like bookmarks, passwords etc. You can of course export it to be extra sure:
[[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
I dont know, however, if this includes information on your version. See the following on how to make a copy of the relevant information
[[Back up and restore information in Firefox profiles]]
Let us know, if it helped

How to replace my old 500GB TC with dual band 2TB TC on existing network

I bought a new 2TB Time Capsule to replace the old 500Gb. I have had a network set up long ago but the iMacs, Apple TV are on ethernet and MBP uses WiFi as well as my Android phone. I can't remember the order of dismantling the old TC and replacing with the new and keeping my network all the same as far as password etc. Bob Timmons info is awesome for adding the 500GB TC back with ethernet as extra backup space. I really need the steps to take to replace with my 2TB TC and have a smooth transition. We have photos galore on Aperture and iPhoto ergo the large drive. Thanks

I shall not be saving any backups from the old 500GB TC so I need to erase that right?
If you are absolutely sure that there is nothing on the old TC that you want saved, then by all means erasing the drive will make the space available for other things like file sharing ... as the old TC's internal drive is still available even when the TC is reconfigured as a bridge. In addition, you can share external USB HDDs attached to it as well. One option would be to dedicate this TC as your Network Attached Storage (NAS) device and use the new TC for the Time Machine backups.
Once you're sure you won't need to access any of the data on the old TC, you can erase it using the AirPort Utility. (ref: AirPort Utility > Select the old TC > Manual Setup > Disks > Erase)
If you prefer "pictures," check out this link: Ask Dave Taylor: How do I erase and reformat an Apple Time Capsule?

Can iTunes convert a file and replace the old file with the new one?

I am trying to convert my wav files to Apple Lossless to save some space. How can I convert the files and make them replace the old files? Right now it just converts new files so that I end up with two files. I have thousands I want to convert and just replace the old ones.
I have an external program that will do it for me, however if I go that route then when my ITunes files are converted to lossless files I need to re-link the files as they show up with the ! showing they are missing. That would mean manually re-linking every song, which would take forever unless there is a way to mass re-link all the files.

iTunes does not see the newly created files as the same file because they are not the same file. They are new, different files. If you have a track that is 1234.wav and you create 1234.mp3 it simply isn't the same file and you can't trick iTunes into thinking it is. iTunes will handle it as a brand new file.
Check Dougscripts web site for scripts which help modifying tag data. However, I suspect you won't find any doing exactly what you want doing. Some tag data are only accessible by iTunes itself.
As for playlists, there's things you can try though they may be more effort than they are worth. For example, you could add a special code for each playlist to some element of a tag (e.g., grouping). Convert the file, then make a smart playlist selecting for the code you added to the group of tracks in the old playlist. If you have hundreds of playlists with a dozen tracks each this will be a grand nuisance. If it is a handful of playlists with hundreds of tracks each this might be worth it.
Another way to preserve playlists would be to edit the .xml copy of the iTunes library file, replacing ".wav" with ".mp3" or whatever format you are using. However, this won't help with play counts because that is only stored in the .itl copy of the file which you cannot edit.

How to replace the keyboard on a Portege R500/R600

Hi,
I would like to replace my keyboard, I'm going to buy a new keyboard soon. I've done this flawlessly with multiple laptops before, but for the R500/R600 it's not comletely clear how to lift the old one out properly.
Are there any screws to remove (except the one on the side) or is it "just lifting it out"?
Thx!

> thanks, that kind of confirms what I was afraid of. Do you happen to know more, or know where I could find more? If there is no other way out I'll send my laptop to an ASP, but I really don't like missing my laptop for days so if it would somehow be possible to replace it myself that would be much better...
> Very helpful answer anyway!
Unfortunately, this is everything what I know. A friend of mine has got such R500 and the ASP changed the keyboard because he spilled a fluid on the keyboard.
I talked to him and everything what he said was that there are some double-sided tapes
However, the R500 is really a nice notebook and it would be really pity if you would damage some other notebook parts during the keyboard replacement.
And to be honest I doubt that the replace would take a longer time
So in my personal opinion I would take the help from ASP so you would be on the safe side

How to delete the old code in the EXIT_SAPLRSAP_001

Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
Narendra

Hi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja

Please guide me how to delete the OLD claimed trip details

Hi SAP Gurus
We have corrected the all the cliams by newly created an posted properly today , how ever they are struck now and since they are form old employees (2007-2008) , few are still active / terminated/ retiree staus cant delete them nor make it zero. But appear in our report as pending...
Please guide me how to delete the old trips.. your support really appreciated..
Thanks
Shan

Hi Shan,
As per my knowledge, no table should be deleted. Check the below link for more info.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/73/6bf037f1d6b302e10000009b38f889/frameset.htm
<<removed>>
Thanks,
Praisty
Edited by: Matt on Jul 26, 2011 3:11 PM

How to replace the old PO

Similar Messages

Maybe you are looking for