How to replace the power supply on the HP Pavilion slimline s5212y

Does anyone know where I can find instructions for this.

Hi,
The second manual of the following link may help:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=4041245
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to change the power supply to the CD/DVD Drive so that it is off by default?

When running on battery I often use the "Safely Remove Hardware" icon from XP to "unplug" the Mat****a CD/DVD drive in order to safe some battery life.(Does it?) I use Fn+Tab to bring it back to life. I wonder if there is a way to make my Notebook (M400) boot with the power supply to the Drive off by default. By the way, any idea where I can find the extra battery for the CD/DVD-Drive slot and at which price?
Thanks in advance for your help.

Hello Robert
If you check start page you will see that this support forum is not any kind of Toshiba support directly but user-to-user forum. But you are not alone and many users expect that some Toshiba support team sit in the office and wait to write answers.
Anyway there are many Toshiba notebook users with very good knowledge and also enthusiasts who try to help other guys with different issues and also share own experience.
Professionalism is not forum but action when you need assistance because of hardware damage or something similar. If you need competent answers and help every authorized service partner should be able to give you info you need. But please dont mix service partner and Toshiba because it is not the same.
Anyway I have found info that you can use additional (second expansion battery) and it should be batteries with part numbers PA3510U-1BAL and PA3510U-1BRL. I can not tell you how much it costs but you can find it alone using Google.
Back to your first question: If I am understand you right you want to save more power and because of that you want to disconnect ODD. It is nice idea but you have obviously misunderstood something. "Safely Remove Hardware option is there to help operating system and say this hardware part will be removed and dont exist anymore but it does not mean physically disconnection from other hardware.
If you need more power use second battery and enjoy your life.
If you have more questions you are welcome. Many users here have M400 and I hope in the future some of them will participate a little bit more.
Have a nice day! :)

My 27" Imac (A1312/EMC2390) keeps shutting down unexpectedly with no warning or "screen of death". I replaced the power supply, reset the SMC, and zapped the PRAM, but the problem continues. Can anyone help me?

My 27" Imac (A1312/EMC2390) keeps shutting down unexpectedly with no warning or "screen of death". So far I reset the SMC, and zapped the PRAM. I even replaced the power supply but the problem continues. My error and system logs seem unhelpful too. Can anyone help me out?

You can get a shutdown like that if the computer gets too hot. Make sure the air intakes on the bottom and the exhaust vent on the top are clean and are not blocked by something in your workspace like papers or the back of the computer being too close to part of the furniture. You need a good six inches (15cm) of clearance between the exhaust slot and other objects or surfaces.
Anti-virus/internet security software, especially the "pay for" kinds, can increase operating temps. So can third-party backup software furnished with many "name-brand" external hard drives.
Fan motors and/or temperature sensors can fail. If you have the original grey disks that shipped with your iMac, find the on that has Apple Hardware Test (AHT) and run it. If you have a failed heat sensor or fan motor, it will detect it with an error code containing "SNS" if it's a bad sensor or "MOT" if its a bad fan motor.
AHT instructions here:
http://support.apple.com/kb/HT1509
Also see if your iMac 27 falls under theis Apple Repair Extension Program:
iMac 1TB Seagate Hard Drive Replacement Program

If plugged into the power supply, should the Cinema Display A1081 standby light come on without being plugged into a mac

I was given an old Cinema Display A1081 a few years ago. I am trying to test it and want to know if plugged into the power supply, should the standby light come on without being plugged into a mac? I don't want to buy a DVI to mini display adapter if it isn't working. One thing I did do was plug Monitor power in and then the USB plulg into my PC laptop and my iPhone charger USB plug into the back of the monitor. I am able to charge my iPhone this way so I know that the power supply is working. But I can't tell if the monitor itself is workign as no ligths are on. (PS: I am purchasing my first Mac so I am a complete newb but very proficient with PCs) Thanks so much for your help.

These Apple tech notes may help:
How to use your PowerBook G4, MacBook Pro or MacBook with the display closed
How to use your PowerBook G4, MacBook or MacBook Pro with the display closed and a Bluetooth keyboard or mouse
Just a final question about Sleep mode - does this have any negative effects on the life or performance of the laptop? I'm so used to Shutting down the laptop each day that I worry about Sleep mode having some sort of drain on the components or something.
There are only two practical differences between Sleep and Shut Down:
1. Sleep will wake instantly, so you don't have to wait for startup.
2. Sleep will drain a new, fully charged battery after several days without being woken or plugged in. If you shut down, the battery charge lasts much longer. Obviously, if you only sleep it overnight, you'll still have plenty of battery left in the morning.
Don't sleep it more frequently than necessary, though. Frequently turning the backlight and hard drive off and on can shorten their life. Just do what's reasonable. I usually leave mine awake until I have to transport it in a bag, along with sleeping it overnight. On battery, I'll sleep it more often to preserve battery.

I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

If the charging plug fits, use it.

How can I replace the power supply IN the time capsule

I have a TimeCapsule that has a bad powersupply. I have opened the timecapsule to confirm this. Has anyone done this before? If so, where did the power supply come from? Cost? I took this to the Apple Igneous bar and they said there is nothing that can be done about it.They said it couldn't even be opened, but simply peeling the rubber bottom off and unscrewing a number of tiny screws and that's it. The 1 TB drive is LOOSE in there. That was a bit of a surprise. I had thought that the issue was the drive itself was bad. I had hoped that if I removed that the AP part would at least work, but after opening it up and firing it up I could hear that the power supply was buzzing thus the conclusion it was the issue.
I am going to put the SATA drive in a reader to see that it is indeed ok. If that checks out, then I know for certain it is the power supply, but I don't know what to use as a sub since the unit needs both 12V and 5V. I'd just as soon find a good supply and use that. Any help would be appreciated.
Thanks,
John A Kostelac

What version is your TC.. A1xxx from the rubber foot?
Power supplies are not available from apple. They do not consider it repairable. It is a sealed consumable.
Power supplies are available from ebay.. simply type time capsule power supply into search.
This is absolutely standard issue that has been ongoing for ages and ages.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a multitude of ways to fix it.
The 1 TB drive is LOOSE in there.
No, it is not loose, it has rubber mounts with pins in the bottom base plate. You cannot see the mount points with the base off. This is standard hdd mount for low noise and vibration.
I had thought that the issue was the drive itself was bad.
Drives seldom are the problem. The Gen2 WD black has been less than great though.. and later spinpoint in Gen3 not so good.
Apple Igneous bar

I need help to replace my power supply for the hp pavilion elite m9510f

This computer has given me many problems since I bought it in '09. From graphic card fan issues, a hard drive crash, and now the power supply has failed.
I did the blow dryer trick but it still ends up breaking a week later. I want to know what new power supply should I buy. One that will be able to fit in the hp pavilion elite m9510f and is an upgrade to the 350w that it has. Maybe somthing under 60-70 dollars if possible. Thanks for any help.

It appears to be a normal case and motherboard. A normal ATX supply should work: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=50001333&IsNodeId=1&Description=Computer...
Just an example of what is availble, but most any should work as long the physical dimensions match the one installed now.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Why is the power supply for the Mini so big?e

Can anyone explain why the power supply / adapter for the mac mini is so big compared to the power adapters for the macbook? The processor and hard drive for the mini is the same as those for the macbook, so why is the power brick so much bigger? Just curious.

While I doubt anyone who knows for sure will be prepared to pop up and answer, I suspect the reason is two-fold: firstly that the supply is engineered for constant use, 24/7, where laptop supplies are not, and thus it is larger because the components are more rugged and over-specced, and secondly for lowest cost, since it is cheaper to engineer a larger product of this kind than a smaller one, due to the premium cost of the smallest narrow-tolerance components.

HP S3120N. I replaced the motherboard, and the power supply, now the recovery discs wont work.

I am a not so proud owner of a HP Pavillion S3120N. I am running windows vista home edition. The motherboard went out, so I replaced it with a Zotac GeForce 8200-ITX Wifi Series. Now the computer says it is noa a valid hp solution, and the recovery discs do not work. is there a way to fix this problem without buying a new operating system?
This question was solved.
View Solution.

Yes, return the Zotac motherboard and get a HP/Compaq OEM M2NC51-AR / HematiteXL-GL8E motherboard. I know that isn't the answer you want to hear but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Outside of that, you will need to purchase a new OS.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Does anyone know where can I get a replacement UK power supply for the Photosmart B110 series?

the HP website is mighty confusing and I'm having no joy!
Thanks
Jeff
This question was solved.
View Solution.

Hi there JeffDennis,
Use your device's serial number here to see available parts. If none are available you may have to turn to resellers.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Mac Pro won't start up. What's the best way to check the power supply?

Hello. I'm having a severe problem with my 2007 Mac Pro. The symptoms are very easy to describe. The computer apparently shut itself off overnight, and when I press the power button to turn it on, absolutely nothing happens. No lights, no chime, no signs of any power whatsoever in the computer. I have never had major problems with the computer before. (Although I had recently noticed some minor skipping problems with streaming videos and Firefox had started hanging occasionally.)
So far, I have checked the power cable and the power outlet. I have also reset the SMC (holding in the Power button for 5 seconds with the unit unplugged). I am unable to see any light in the diagnostic LEDs (including LED 1) when I press the DIAG_LED button on the logic board.
While I welcome other suggestions, all I can figure is that this is either a power supply problem or a major logic board failure, but I don't know which. I have a multimeter and would like to test very directly if the power supply is the problem, because they are very expensive and obviously I do not want to order a replacement supply if it would not fix the computer. Does anyone know what the best way to test the supply directly is? What pins on what cable should I test, and what voltage should I look for?
Also: No the computer is not under any warranty. If at all possible, I would like to fix this myself. Thanks for any help you can give.

Well, I may have found the answer to my question as to why replacing the fuse dows not seem to be encouraged. I cut out the failed fuse (fast fuse, ceramic, 16 Amp 250V), and replaced it with another that was as close to it in spec as I could find (15 A instead of 16). Then I put the supply back in the case.
When I tried to plug it in, I got an immediate spark, followed by an acrid smell from the power supply. Later inspection revealed that the new fuse blew, as did another component nearby (not sure what it was) where I could see blackening and the smell was concentrated. At this point, I would consider myself lucky if the power supply didn't take anything else on the computer out with it.
Lesson learned; will try a new power supply and go from there.

I need help picking the correct power supply for my HP Pavilion a1000

Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
This question was solved.
View Solution.

jimmycaps wrote:
Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
Hi,
Yes the PSU will be ok. It's a desktop so you don't have to use exactly the same PSU. It can be even more powerful but make sure there are all compatible connectors. It looks like the CDR version is only 300W and the DDR 400W. The connectors are the same..
http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

HT2811 If the display flashed short long short could the power supply be bad?

If the display flashed short long short could the power supply be bad?

Hello,
In order to determine what might be going on, I am going to need a little more information about your setup such as:
-what version of the cFP drivers are you using?
-where/what device are you outputting voltage to? at what voltage? how much current do those devices require?
-could you explain further by what is meant by '[at] approximately 30 seconds, all channels on that PWM shut off'. Are the lights on the modules still illuminated when the system 'shuts off' or do they remain on?
-Do you have another power supply you could try this with?
-Does the power supply meet the specifications for use with this module per p. 4 and 5 of the FIELDPOINT AND SPECIFICATIONS™ OPERATING INSTRUCTIONS FP-PWM-520 and cFP-PWM-520 Eight-Channel, 5 V...
-Does the power supply continue to output 24VDC even after the 'shut down'?
Regards,
National Instruments
Applications Engineer

Is there any way to change the power supply on a hp elite 8100 sff

hello . Is there any way to upgrade the power supply from the standerd 240W psu . the pc is a hp elite 8100 sff ( quad i7 2.8ghz nvidia quadro 295 nvs and 8 gb ram )

Joleney-
I do not know of any way to turn off the Sleep button. If yours does not work, there might be an internal problem like a loose connection in the iPad.
One thing you can try is to hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow if it appears. If successful, the iPad will restart after a couple of minutes.
If the Apple logo never appears, it is likely your Sleep button is bad. If the iPad is still in warranty, show it to an Apple Store Genius. You may get a replacement iPad if the Genius can not fix it.
If the iPad is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center near you. There may be one in your city. If out of warranty, the cost of a repair would most likely be less than Apple's replacement price. <Apple Authorized Repair Centers>
Fred

Display the power supply status in the IPS 4270

How to display the status of the power supply on the IPS 4270
since the IPS has two power supplies and one has failed, so i want to check what is causing this failure (i am looking for a message from the CLI describing that the IPS power were failed).

At this time, there is no method to display the status of the power supply from the CLI or IDM GUI of the IPS-4270. There is an open enhancement request to have this capability added in a future release of the IPS software.
Scott

How to replace the power supply on the HP Pavilion slimline s5212y

Similar Messages

Maybe you are looking for