How to replace video chip. hp pavilion g4 notebook

hp pavilion g4 notebook. apparently video chip burnt out. computer does seem to run hot. dead black screen but makes all
the other customery noises. video chip burnt? If so, what to do and how to do it?   Product key: gf6hx-2ymk7-hm9kv-r488-wqvr7

Hi,
From your message, it can be anything, not the video chip, can be the HDD. g4 is a series of many models/products and on many models the video chips are soldered to the motherboards that means you have to replace the whole board. Again, we need to know your machine. Please use the following instructions for find out the model/product of your machine:
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HOW DO I PUT MY HP Pavilion g6 Notebook WINDOWS 8 INTO SAFE MODE

    HOW DO I PUT MY HP Pavilion g6 Notebook WINDOWS 8 INTO SAFE MODE.......I KEEP TRYING TO TAP F8   BUT IT DOES NOTHING!!!!!!!

    Hi:
    Microsoft changed the procedure for entering safe mode in W8/8.1.
    Please see this guide for the new process...
    http://www.howtogeek.com/107511/how-to-boot-into-s​afe-mode-on-windows-8-the-easy-way/

  • How to Replace cooling fan HP Pavilion g7-1139

    Need information on how to replace the cooling fan on my Pavilion g7-1139 series Laptop please .
    This question was solved.
    View Solution.

    Hi, Rick:
    It appears that the manual for the g7-1300 series would also pertain to yours...same hardware specs...
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5214430&
    There is no manual linked to your notebook's support page, and the one for the g7-1139 is for older hardware (1st generation core processors).

  • How to replace Power Supply in Pavilion 6535

    Hi,
    I have an HP Pavilion 6535.  I want to replace the power supply.  I'm able to disconnect cables from the HDD, floppy and CDROM, but I don't know how to reach the cable connections to the motherboard and the fan cable.  They seem to be tucked behind the CDROM and inaccessible. 
    I think I can see the very top of the motherboard connector, but it seems like I'd need to go in blind and follow the wires with my fingers to be able to get to the connectors and disconnect them.  This method doesn't seem like a good approach, so I haven't tried it yet.
    It makes me think I'm missing something and that there must be another opening that makes the motherboard more easily accessed. 
    I don't have any experience fixing PCs, but the basic instructions for replacing a power supply seem so simple that I thought I could do it (see http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=bph05729&cc=us&lc=en&dlc=en&product=59370).
    Am I mistaken and should go to a repair shop or are there instructions somewhere that make it clear how to reach the 6535's motherboard/fan connectors?  (I've searched the web unsuccessfully for such instructions.)
    Thanks for any help. 

    If there is something in the way remove the screws that hold the item that is in the way, write down how you do it or take photos, then reverse the procedure when you put it back together.
    The CD ROM will probably have a couple of screws in the sides, remove them and it will slide out of the way, trained monkeys can build these, so work backwards.

  • Replacement DVD Drive for Pavilion dv5 Notebook

    My DVD Optical Drive will not read disc so I can't load software.  I'm trying to replace it but can't figure out what drive to buy.  In the HP Support Assistant it says the Model is CDDVD TS-L633N.  The product number for my computer is WQ799UA#ABA.  Can't anyone tell be where I can get another drive like the one I have?  

    Thanks, I got it to work by going to the cmd prompt and manually auto running the program. At first it said there was no disc in the drive. Weird, and this keeps happening.

  • Is there a graphics card that will be compatible in my HP Pavilion dv2000 notebook (model dv2419us)?

    ?Is there a graphics card that will be compatible in my HP Pavilion dv2000 notebook (model dv2419us)? - This notebook has Windows 7 Home Premium.
    - I was looking to take the free upgrade to WIndows 10 - I requested the reservation.
    - Initial response was to wait for downloads would be available.
    - Just got the message that it is not compatible with Windows 10 because it has an Nvidia Go GeForce 6150 graphics card.
    - I contacted Nvidia about a card that would be comaptible with WIndows 10.
    - Response was that couldn't recomment a replacement, and to contact HP.
    - Does anyone know if there is a graphics card replacement for the HP Pavilion dv2000 notebook that would make it compatible with Windows 10?
    ...Or is my only option to not upgrade to Windows 10 or buy a new laptop?

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand that you are inquiring about a Graphics Card Replacement.  Unfortunately the Graphics Cards are not replaceable on the HP Pavilion dv2000 Notebook PC. They are attached directly to the motherboard. The only way to replace a Graphics Card  would be to replace the whole Motherboard.  Hope I answered your question.  Have a great day!

  • Graphics/Video Card [REPLACEMENT / UPGRADE] on HP Pavilion Desktop - Help

    I have the following:
    HP Pavilion Elite m9152p Desktop 
    Upgraded to Windows 7 Professional 64-bit (upgraded 11-2009)
    The video card seems to have gone out and I have tried the following:
    Reinstalling Operating system
    Uninstalled & Reinstalled & Rollback drivers
    Prior to the above attempts, no changes had been made to software or hardware only leading to the same result: The video seems to be fine and then it freezes and crashes and ultimately has to have a hard-restart at which point, the computer loads the onboard video/graphics.
    I need to purchase a replacement video/graphics card, but I am unsure what specs I need to be aware of or what my computer can handle as far as a replacement and maybe a possible upgrade (not necessary) - any help in this regard would be most appreciated.
    Thanks!
    This question was solved.
    View Solution.

    I think it is a good choice.
    The reviews seem positive for the most part including that the fan appears to be quiet.
    I don't know if your previous card had HDMI.
    When you install your new video card, it may disable your onboard audio due to the HDMI audio chip on the video card.
    If you do lose your onboard audio, after you install the video drivers, reboot the machine, go into the BIOS, find the onboard audio setting. It may be set to Auto or Disabled. Change the setting to Enabled. Save the setting where you made the change and again when you exit the BIOS.
    Upon reboot you will have your onboard audio back.
    Looking forward to hearing back from you.
    Paul

  • LIVE Video Tutorial! How to Replace and Configure a Video Card - HP Expert Day "How-To" Video Series – Today at 1:00pm PST

    Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day!
    I am an HP employee.

    #test

  • LIVE Video Tutorial! How to Replace a Hard Disk Drive - HP Expert Day "How-To" Video Series - Today at 11:00am PST

    Join us at 11:00am Pacific time for a LIVE video tutorial of how to replace a hard drive! The video features HP experts who work with the products every day!
    I am an HP employee.

    #test

  • How to Correctly update Macbook Pro's video chip drivers

    I am currently using Boot Camp with Windows 7 64 Bit on my MBP Early 2011. My question is how can you successfully update the video chip drivers when using windows 7? When I try to install drivers the AMD updater can not recognize my video card. But my games have made it clear that I am not running the most recent drivers

    fmurry925, unfortunately, the "normal" way of updating video drivers doesn't apply to Boot Camp installations. For some reason, Apple uses a slightly customized video chip in MBP (ie mine is an nVidia 320M, which doesn't exist in any non-Apple computer. Well, there's one.)
    This means that the standard nVidia driver set doesn't recognize this chip. And I suspect it's the same for your computer. So you're stuck with using the drivers available from Apple, which are updated much less frequently than the generic drivers.
    There are workarounds for this, consisting of "modding" your INF to allow the generic drivers to work for you. But I did some searching, and it seems that your particular chip, which is "switchable" between the Radeon and the Intel graphics, doesn't have a modded INF available. Yet. So, unless someone else knows of a solution, you might be stuck with the Apple-supplied drivers for a while.

  • Pavilion dv-7 4060us Video chip

    Hello, dear friends! 
    This is my problem: I have a laptop hp Pavilion dv-7 4060us which is about 4 years old. I bought it from a guy 3 years ago when I was on a "Work and Travel USA" student program. A few months ago my video chip died and I tried to replase it with an other one. It did not help. This time motherboard starts but when it comes to windows logo, the moment that its time to load windows, it shows me a mistake and the only option for me is to restart. When I told that to a friend of mine, he said that the graphics accelerator of the new chip is not working. I just talked to a guy from a service for computers and he said that because this laptop is with 2 video cards, in BIOS there should be an option to change between video cards. I logged in BIOS but I could not find any option connected to "video" subject. 
    And finaly, I starded to wonder if in the computer service the technician have changed the old not working Video chip with exactly the same new one. Because if he put an other chip, a different one, the laptop will not work. 
    So my question is: Would you tell me the exact model of the videio chip for my laptop? 

    Hi TheBulgarian,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your hp Pavilion dv-7 4060us Notebook and needed to know a part number or Video chip number.  Here is a link to the manual page 2 for a description of the Video cards. I would need the serial number of the Notebook and the same for the motherboard.  Please review the HP Privacy Statement . Then send it to me in a private message.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to correctly update video chip drivers

    I am currently using Boot Camp with Windows 7 64 Bit on my MBP Early 2011. My question is how can you successfully update the video chip drivers when using windows 7? When I try to install drivers the AMD updater can not recognize my video card. But my games have made it clear that I am not running the most recent drivers

    You realize this has been asked 100s of times, right?
    Don't use Auto-detect. Download the driver. Unzip. Uninstall Apple gpu driver. Run Driver Sweeper 3.x maybe.
    You may be able to install. If not, use Device Manager to update and find the driver you unzipped.
    There are links or bookmarks to threads in my profile: bookmarks for AMD.

  • HP Pavilion dv3550el, how to replace RTC battery ?

    HP Pavilion dv3550el
    Where is RTC battery on my laptop ? how can i replace it ?
    Thanks, Paolo.
    This question was solved.
    View Solution.

    Hi Paolotia,
    Replacing the RTC battery in your notebook does involve rather extensive disassembly. You will have to disassemble it down to the system board. 
    See page 77 of the Maintenence & Service guide for your notebook series.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How do I reset the video chip so I lose the psychedelic display?

    How do I reset the video chip so I lose the psychedelic display?

    rscotson wrote:
    sorry but but I jumped to my assumption re root cause. I dropped my iPad and the screen went psychedelic. Based on very limited research it seemed my video chip may have come loose.
    Without seeing it, it's much more likely the LCD is physically broken.

  • How to disable onboard video chip (ms6337)

    Hi all.
    My mainboard is MS6337(815Epro , bios version:1.4)
    I've bought a new videocard ,so I want to disable the onboard video chip.
    Thanks for any help .

    I don't really have anything to compare with  :(
    I would need another i815E board to see if there is supposed to be a change at all.
    My guess is that since there is no 3D engine in the integrated VGA core you need very little memory bandwidth to run it:
    1024*768 @ 85 FPS 24bit = 1024*768*85*4=255MB/S
    The RAM is capable of 1066MB/S, but the PIII CPU never uses that anyway so there is no bandwidth conflict between the CPU and VGA.

Maybe you are looking for

  • Why will my iPod shuffle only sync iTunes purchased music not CDs?

    My ipod shuffle will happily sync with and transfer the music from iTunes that I have downloaded from iTunes but fails to transfer music from iTunes that I have uploaded from CD. Why?! Help!

  • $300 For 2 Photoshop/Illustrator scripts- Applescript Preffered

    I have been meaning to write these myself for months, but have been too busy, so we're trying to hire someone. We would prefer these to be mostly Applescript, because I know Applescript and will be able to modify/maintain them, but we might consider

  • Need information on sending files

    Hello , I have a question that I am very curious about, and I hope that someone could help me out. So, about 4 months ago, I was sending alot of files to one person via skype, and he haven't accepted all of them (nor declined), I guess he just didn't

  • Unable to connect to database  in ofline mode

    Hi , i have server OBIEE server installed in Linux and client installed on windows7 the issue is when i log in to admin tool on client it opens and show all tables but.. ..... when i right click a table and click on view data .. it through an error '

  • Two "Call Adapter" step in SXMB_MONI

    Hello Experts, I have developed Sync interface WebService - PI - BAPI. However when message is failing due to error in mapping at response side, there are 2 "Call Adapter" steps in sxmb_moni got that message. First Call Adapter step is not in error s