How to replace WTK Bluetooth with my implementation?

Hello,
I am trying to modify the WTK 2.2 beta 2 library, such that the emulator uses my bluetooth (javax.bluetooth) implementation instead of the build-in one. I am coming down to kvem.zip in wtklib folder, but I don't see where javax.bluetooth package is located. When I do LocalDevice.getLocalDevice(), it somehow automatically load the SUN implementation, even I already replacing it. Anyone can explain how emulator load classes?
p.s. don't tell me it is jsr082.jar in lib folder because i know it isn't. In fact, none of the jar files in lib folder really matter because even I remove all the jar files, the emulator still run normally. so the jar files in lib is useless to the emulator.
thanks alot
ben

Hey Ben,
did you figure out how to do this? I would like to do the same thing, using either Rococo DK or the Avetana implementation of JSR82 to connect the emulator to "real world" devices.
Cheers, Nils

Similar Messages

  • How can I use Bluetooth with another devices?

    How can I use Bluetooth with another devices?

    You can set up your FaceTime account in Settings > FaceTime.

  • How to replace a movieclip with another movieclip

    How to replace a movieclip with another movieclip
    Hi,
    I am having a swf called tchild.swf... in this i got a
    movclip 'child1'. i am loading this tchild.swf into another swf
    tparent.swf within 'mcloader' movie clip.. i got another movclip
    called 'picture1'
    i am loading tchild.swf into mcloader movclip.. and i want to
    load 'child1' moviclip into picture1..
    how to replace a picture1 movieclip with child1 mc..
    PS: i dont want to load picture1 from library.. its on the
    stage.

    AWT or Swing?

  • How to replace key value with character

    Hi Experts
    Can any one tell me, how to replace key value with character, whether it is possible are not. My present report is displaying below format.
    country--city-area-flatnocountry--City-Flatno
    Customer--USACOst1111---UK--HD20--
    C100--11---11--
    C200--11---1--
    For the above example format i am able to display. But now i want to replace 1 with character value for example. For C100
    country is USA at presnt 1 but it should replace with USA.
    You find required format below.
    country--city-area-flatnocountry--City-Flatno
    Customer--USACOst1111---UK--HD20--
    C100--USACOst1111--
    C200--UK--HD20--
    thanks .
    Regards,
    Vishal.

    Hi Markus,
    Thanks for reply,
    Actually i dont have attribute for the customer, the data is maintained in ods, in the form, customer name one info-object and customer value one more info-object this value got text. This value stored in the ods as below
    costomer number  customer value
    C100--USA
    -C100CO
    C100--11-
    C200----
    UK
    C200----
    20
    Please let me know any clarification you need.
    Thanks and Regards,
    Vishal.

  • How to replace double quotes with a single quote in a string ?

    Hi All:
    Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
    My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
    Thanks,
    Dima.

    Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
    SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
    REPLACE(
    STN. 'A'{code}
    Nicoals.                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to replace the '&' character with '&' in xi

    Hi,
    i need to replace the '&' character with ' &'.but i f i am converting it is displaying as '&' because internally '&' = '&'.
    beacuse of this it is not converting.
    is there any possiblity to change the  standard conversion in xi.

    Graphical mapping does not support special character like & , <,> to be mapped.
    You can encode & as and in UTF-8 only.
    if you want the special character to be used, Opt XSLT mapping with ISO-8859-1 encoding
    <xsl:stylesheet version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:output method="xml" encoding="ISO-8859-1"/>
    <xsl:template match="/">
    <xsl:copy-of select="*" />
    </xsl:template>
    </xsl:stylesheet>
    How to Work with Character Encodings in Process Integration (NW7.0)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42

  • How to replace westell 6100 with westell 327w?

    Hi all,
    I am currently using a Westell 6100 and I just inherited a Westell 327W from my brother who switched over to FIOS.
    Can I replace the 6100 with the 327W? And how do I go about doing that?
    Any suggestions or recommendations would be greatly appreciated.
    Cheers!

    If the 327w has newer firmware on it, you can just factory reset it and then connect it up. Once it is online, visit http://192.168.1.1/ and use admin/password respectively as the login information. Then, set a new password for the gateway.
    Once done, visit http://192.168.1.1/verizon/redirect.htm and choose the disable button. Assuming the modem has been able to get a connection at this time, you should be online.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How to replace an MDB with a servlet

    I got a situation to replace an MDB with a servlet,How can I do that,more appreciated if u send me some sample code.

    Hi,
    An MDB can be replaced by a normal java class by doing the following.
    Make a jndi lookup for the queue/topic connection factory and then create a javax.jms.QueueConnection. Then create a javax.jms.QueueSession using this connection. Make a JNDI look up for the Queue. Create a javax.jms.QueueReceiver using the created QueueSession. Call start on the QueueConnection and receive a message by calling the receive method on QueueReceiver.
    Thanks,
    marvlex

  • How to replace one char with two chars in email address policy?

    I very much like to replace the 'ß' char in the surname with 'sz'. However, applying filter '%rßsz%[email protected]' on 'Preußig' leaves me with '[email protected]'.
    So, how do I replace one char with two chars in email address policy?

    As far as I know, your only solution is to manually create such addresses instead of using e-mail address policy.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • How to replace the arrow with a custom graphic on a TitledPane?

    The TitledPane has an arrow that changes state (rotates) to show whether the pane is collapsed or expanded. Is there a way to replace this arrow with a custom graphic for each state?

    Most definitely. Everything in the controls is style-able from CSS. The region you are attempting to style can be addressed via:
    .titled-pane > .title > .arrow-buttonSo you could specify images here for example, or you can just change the arrow path by adding another > .arrow on the end. Below I've posted the entire CSS style that is built in for TitledPane so you can see how the whole thing is styled. You can create your own stylesheet, copy/paste this in there, and then start tweaking things and see how it affects the look of the TitledPane.
    Cheers
    Richard
    * TitledPane                                                                  *
    .titled-pane {
        -fx-skin: "com.sun.javafx.scene.control.skin.TitledPaneSkin";
    .titled-pane > .title {
        -fx-background-color: -fx-box-border, -fx-inner-border, -fx-body-color;
        -fx-background-insets: 0, 1, 2;
        -fx-background-radius: 5 5 0 0, 4 4 0 0, 3 3 0 0;
        -fx-padding: 0.166667em 0.833333em 0.25em 0.833333em; /* 2 10 3 10 */
    .titled-pane > .title > .arrow-button {
        -fx-background-color: null;
        -fx-background-insets: 0;
        -fx-background-radius: 0;
        -fx-padding: 0.0em 0.25em 0.0em 0.0em; /* 0 3 0 0 */
    .titled-pane > .title > .arrow-button .arrow {
        -fx-background-color: -fx-mark-highlight-color, -fx-mark-color;
        -fx-background-insets: 1 0 -1 0, 0;
        -fx-padding: 0.25em 0.3125em 0.25em 0.3125em; /* 3 3.75 3 3.75 */
        -fx-shape: "M 0 0 h 7 l -3.5 4 z";
    .titled-pane:collapsed > .title > .arrow-button .arrow {
        -fx-rotate: -90;
    .titled-pane > *.content {
        -fx-background-color:
            -fx-box-border,
            linear-gradient(to bottom, derive(-fx-color,-02%), derive(-fx-color,65%) 12%, derive(-fx-color,23%) 88%, derive(-fx-color,50%) 99%, -fx-box-border);
        -fx-background-insets: 0, 0 1 1 1;
        -fx-padding: 0.167em;
    .titled-pane:focused > .title {
        -fx-color: -fx-focus-color;
    .titled-pane:focused > .title > .text {
        -fx-text-fill: white;
    .titled-pane:focused > .title > .arrow-button .arrow {
        -fx-background-color: white;
    }

  • How to replace missing fonts with a specific font (and not a suggested font)

    Hello all!
    Looking to replace missing fonts within my document - but the drop-down selection only gives a couple of suggestions, none of which are the font I want to use.
    How can I replace the fonts with a font of my choosing?
    I've attached an image to give more clarity - notice how the drop-down only gives the option to select between 3 fonts without an option to select your own font - many thanks!

    Same problem! The only solution I found is to prepare a textbox in a new file with all the font you need. Copy and past in the file you need to change font. Go to type/risolve missing font. Will open the same window in the pic you pasted. Then you find the font in the dropdown menu. I have to change all the Helvetica family ...it's a long go. If some one could save me. Hope to be usefull to your problem.

  • How to connect via bluetooth with wireless printer

    how to connect my macbook pro via bluetooth with epson all in one wireless TX600FW

    Bluetooth between iOS devices and computers is only for Internet tethering, nothing else.
    See: http://support.apple.com/kb/ht3647

  • How to replace one variable with another in large number of queries

    Hello guys!
    I have this situation: our company needs to use one variable instead of another for certain amount of queries.
    Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
    Apreciate your help!

    you could try (at your own risk) the following:
    1. search the technical id (ELTUID) of your variable in table RSZELTDIR
    2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
    3. add similar entries for your new variable
    4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them)

  • How to replace SAP logo with customer logo

    Hi Gurus,
    How  to replace or insert a customer logo when creating input schdules EvDRE function.
    Cheers,
    Reddy.

    Reddy,
      You  shld  be  able  to copy and  paste  your  logo (after deleting  the  SAP  logo). ..as you  would  do  in  regular  excel.  If sometimes  it doesn't  work...use the   insert  picture  functionality......regular  excel/MS  way.
    Hope  this  helps.
    Vishal.

  • How to replace blank spaces with zero's in the report

    hai sdn guys,
                         we have a requirement where we cannot have any blank fields in the report and i need to replace the blanks with a zero. What is the best way to do it.

    Hi Sunitha,
    It is not proper that you are posting the same question multiple times:
    Re: report o/p should not have blank spaces in - in case of no value
    should get 0's in place of blank value in  the output of the report
    That too inspite of my requesting you not to do so.
    I am not sure if you have ever gone through the Rules Of Engagement which are prominently posted in each forum, but I think it is SDN courtesy to provide proper feedback when posting a question and assign points as deemed fit. This helps (and motivates) everyone to work on your problem and try to give you a solution. I hope you will be more careful in the future. Thanks!

Maybe you are looking for