How to replicate a complaint from ECC IS-M 6.0 to SAP CRM 7.0

Hi Media Experts,
I have a request from my client in whom I have to create a Complaint based on a R3 Media Object (Subscription Order), and then allow editing this complaint in SAP CRM.
I have already reached the first part. Over and done with a transaction launcher, I'm displaying and editing the Subscription Order from my CRM User Interface (but in R3), and I created complaints starting from the Order position as the requirement.
Now, I need to replicate these complaints to CRM in order to update and edit these documents for the case the client call again and the Media IC Agent wants to search for this complaint.
The question is: Could I replicate these complaints from R3 to CRM? In case of I yes, what would be the best CRM object to mapping my R3 complaint? And last but not least, the replication must be done through some middleware customizing?
I appreciate any approach.
Thanks in advance,
Nicolas

Hi Prashant,
Thanks for the reply.
The reason why I won't create my complaint in SAP CRM is because I don't have the Subscription Order Object in CRM it is in ECC Media instead.
As I creating that complaint in reference to some positions of the Subscription Order, in case I create it straight in CRM I'm not allowed to do some validations regarding to dates, and existence, information that is only in ECC.
For instance, I have the requirement to make a complaint regarding to the delivery of the newspaper, for the case where the client did not receive it. To validate the days in which the client is subscribed, I have to contrast information with the Media Order, because that information isn't in CRM.
Thanks in advance,
Edited by: Nicolas Cabral on Nov 10, 2011 2:31 PM
Edited by: Nicolas Cabral on Nov 10, 2011 2:32 PM

Similar Messages

Replicate sales orders from ecc to crm

Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
Andy

Hi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.

By using middleware how data can be passed from ecc to crm?

By using middleware how data can be passed from ecc to crm?

Hello,
If middleware setup is done for the data exchange between ECC and CRM, then you can use customizing objects
(available in txn R3AC3) and business objects (available in txn R3AC1) , and condition/pricing related objects in available in txn R3AC5, which can be used for extracting data from R/3 to CRM. You can also find some upload objects for uploading the data
from CRM to R/3.
You can use transaction R3AS, to perform the initial load of customizing/Biz objects.
Once initial load is done, any delta changes would come automatically to CRM by means of delta load.
You also have request load, using which you can download range of materials/BPs which are missing or needs to be updated in CRM.
If you have any specific questions, let me know.
Hope this helps!
Best Regards,
Shanathala Kudva.

How to fetch the data from Ecc to BI ?

Hi everybody.
Can anyone briefly explain with the screen shots > How to fetch the datasource from RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCE

Hi.
You can follow the below steps to fetch the data from ECC to BI System.
1>Connection should be there between ECC and BW System.
2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
Please refer the below link for more details on extraction.
http://www.trinay.com/SAP%20BW%20Extraction.pdf
Hope this helps.
Br.
Alok

How to transfer Sales BOM from ECC to APO DP

Hi,
Demand planning require Sales BOM from ECC. Sales BOM in ECC will not have Routing & Work center, then how a PPM with Sales BOM can be transferred. If i have to create a dummy routing & WC for those sales BOM it will be tidious job to create all the master data. Is there any way to transfer the BOM alone from ECC to APO.
Please throw some light on it.
Thanks & Regards
Shan

Hi Somnath / Ritesh,
Are you sure about ciffing Sales BOM(usage 5)to APO as PDS ? Did you test it or your comments are based on SAP documentation?
I tried to CIF Sales BOM as SNP PDS, it is creating PDS with only parent item.Child items are missing.I have not used any production version here.
If i use production BOM(usage 1), it is creating PDS with both parent and child items.I have not used any production version here also.
SAP says BOMs can be ciffed to APO as PDS. No productions versions are required. but it has not mentioned about BOM's usage. May be , Is it by default production BOM?
One more question, Is it possible to create production version with BOM usage 5? It has no meaning right..
I think system does not allow you to create production version with BOM usage 5.
I also tried with BOM usage 2. In this case also it behaves like sales BOM.
looks like only production BOM can be ciffed with proper BOM structure in APO.
if required i can send you the link to share screen shots.
Pls comment..
regards,
Umamahesh

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

How to generate CCMS report from ECC system

Hi,
I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Regards,
Pradeep J

Pradip_jag12 wrote:
> I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
>Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Hi,
Contradicting statements.
However check the link for CCMS Configuration:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Ideally the CEN system should be a double stack i.e. best if its a solution manager.
Regards,
Srikishan

How to Post Idoc's from ECC to SCM

Dear Friends,
This is Shalini Shah.
how to post the Idoc(MATMAS05)
from ECC to SCM-APO.
please give me the details on this topic.
Regards,
ShaliniShah

Please see the Wiki page details mentioned in this [sticky|Wiki page for SCM-APO; thread at the beginning of the forum.
Refer to the [CIF|https://wiki.sdn.sap.com/wiki/display/SCM/CIF] Wiki page for details on setting up and using CIF. I am not aware of the IDOC details but if it material master (as SB has mentioned) then your best option of transferring the master data from ECC to SCM / APO will be to use the CIF.
After intial CIF settings are maintained (see details inthe CIF Wiki page) you will need to create Integration Models and activate them for transferring the data.
Somnath

How to replicate material master from R/3 to CRM

Hi guys,
I am trying to replicate material master from R/3 to CRM using BAPI_MATERIAL_SAVEDATA but no changes are getting replicated to CRM.
Any help..??
Thanks,
Sid

Hi find below for the product cat
Steps to create the product category in SRM:
1)       Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2)       Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3)       Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

How to restrict contact person from ECC to CRM

Dear All,
We need customers to flow from ECC to CRM, but not Contact persons.
Seems that the 2 adapters CUSTOMER_MAIN & CUSTOMER_REL have to have the same filter settings.
How do we achieve this?
Please help!!
Best regards,
Rohit L.

Hi Rohit,
In CRM table CRMC_BUT_CALL_FU you can add any function module you need to filter data as per your requirement... Have a look to this OSS note that will show you the trick:
Note 638628 - No contact person upload into R/3: Example for exit users
Regards,
Nicolas
PS: this OSS note is even better:
Note 774662 - Enhancement of the business partner data exchanges
Edited by: Nicolas BUSSON on Jun 4, 2009 10:13 AM

1405 Replicate Account Hierarchy from ECC to C4C - new content needed ?

In 1405 integrations in C4C, a new feature provides Account Hierarchy replication from ECC.
We were implementing in 1402 and got upgraded so C4C side should be fine.
How do we get those new content - IDOC type, load report, mappings, etc. ?

The IDOC types will be in the Add-On. The updated integration guide includes the configuration. I just downloaded it from SMP yesterday and noticed that the new customer hierarchy loading has been added.

How to deactivate nterfaces triggering from ECC to SRM (Plan driven scenario)

Hi SRM Friends,
If I check in SXMB_Moni, I could see outbound interfaces which are triggering from from ECC to SRM.
Please guide me how to deactivate these XML messages.
We are not using EPRTRANS table, not maintaining V_T160 tables.
I don't know where to check further to deactivate this Plan driven scenario. Please suggest
Best Regards,
BV Babu

Dear Rahul,
Thanks very much for the reply.
Would like to inform you that we had to maintain an internal custom table entry to solve this issue.
This is related to a workflow issue. WF triggered unnecessarily... this caused triggered XMLs.
Regards,
Babu
Email : [email protected]

How to replicate a customer from ERP to a Person in CRM

Hi,
I am doing an implementation of CRM 7.0 and have to integrate it with an existing ERP (ECC6) system. I've set up the replication of the Business Partners to replicate two of the Account Groups in ERP to CRM and it is working well. The only problem is that the customers in the ERP system are Organizations and Persons. When the replication takes place, all are created as Organizations (role sold-to Party).
Is there a way to replicate customer data from ERP and have the BP in CRM created with BP Category 1 (Person) in stead of 2 (Organization)?
The customers in the ERP system are not consumers.
Thanks
Jeanine

I logged an OSS for this problem and SAP replied with the following:
"What you've explained is a standard behavior of the system.
Since CRM and R/3 have different BP data models, all BPs from R/3 are
transferred to CRM be default as Organizations.
An only exception is BPs, which are assigned into account group, which
is mapped into classification "Consumer: persons".
Customers downloaded to CRM will always be interpreted as Business
Partners of the type organisation.
Customers in R/3 are Organisations and are subsequently replicated to
the CRM system of the BP Type - Organisation, therefore the standard
scenario is that customers downloaded from R/3 are replicated as
Business Partners of type Organisation.
If you don't want to use functionality of Consumers, it's also
possible to change the category with a modification by
appending the R/3 outbound processing or the CRM Inbound processing
this would change the organisations to persons, and is possible by
changing the category in the complex structure from 2 to 1 by copying
the organisational data to the personal data, the category change
works only before the creation of Business Partners in CRM, for
existing BPs that have been downloaded, it would be necessary to
delete these BPs using Note 415007 and start the download again after
modifying the User-Exits.
The data sent from R/3 are mapped into a complex structure of type
BUS_EI_MAIN. In CRM table CRMC_BUT_CALL_FU you can add an own
function module for event "CRM INBOUND" and a position less than
100000. Here you can you can change the field
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_CONTROL-CATEGORY from 2 to 1
depending on other data that is available in this structure.
Additionally you have to map the organisation specific data
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_ORGANIZATION into the
person specific data
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_PERSON and initialize the
organizational data. Be sure to check the category before doing this,
because the initial download sometimes forces partial processing
in case of errors and tries to reprocess the BPs that don't have errors
So your mapping from organizational data to personal data should be
done only once.
This solution only works if the criteria is available in the structure
BUS_EI_EXTERN. If it is not, you can add an User Exit in R/3 in the
R/3 outbound processing at event DE_BCS2S in the tables TBE24
(definition of product) and TBE34 (definition of your module).
Unfortunately the data are only available as BAPIMTCS structures
and you have to look for a structure
with BAPIMTCS-TABNAME = 'BSC_MAINCE' to change the category.
See module PI_BP_MAIN_TO_BAPIMTCS in order to understand this mapping."
We will do the cutomization and test, but I think this is the only solution.
Regards
Jeanine

How to Read Service Confirmation from ECC

Hi,
I would need to read the service confirmation details from ECC system particularly interested in ibase, component, product id information. I looked at this BAPI BAPI_BUSPROCESSND_GETDETAILMUL, which is unable to provide me REFOBJ, though this BAPI calls CRM_ORDER_READ inside, it is not loading REFOBJ and hence i will not get ibase, component, product id info related to Service Confirmation.
Please provide me any related hints on this.
Thanks in advance.
Cheers, Satish
Edited by: Satish Reddy Palyam on Aug 9, 2011 7:09 PM

Hi all,
Any idea on this.
Thanks, Satish
Edited by: Satish Reddy Palyam on Aug 15, 2011 5:39 PM

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
    The instance of the above bapi.
    Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
   In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
   Z<Struct>itm tab=new Z<Struct>();
   Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
    Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

How to replicate a complaint from ECC IS-M 6.0 to SAP CRM 7.0

Similar Messages

Maybe you are looking for