How to Replicate tables at different servers??? Please Help!!!
Hi all,
Basically i have two tables with same table structure (one is master & slave )both on different server.
I just want to update slave table whenever Master table is updated with new records.Can this activity be scheduled???
Could somebody guide me how to achieve this...
Thanks in advance
Hi,
you could write a TRIGGER in the master table which would update the other table or you could have a procedure which you could run every hour or depending upon how frequently you want to update the other table. Every thing depnds upon how frequently the MASTER is updated, how quickly you want the information transferred to the other table ....
http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/jobtosched.htm
Thanks
Similar Messages
-
I logged onto my MacBook Air and it is asking me for my "local items" keychain password for several different things. I do not know what this is or how to get rid of it. Please help. Thanks.
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 3
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
Rename login.keychain to "login-old.keychain".
Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
Select
File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Adobe PDF forms using tcode SFP - Nested tables... Please help
Hi Friends,
I have some strange issues when I am trying to create a nested dynamic table with SAP DATA in Adobe Designer.
In the context, under the MAIN node
I had dragged the header table. Under the header table I had dragged the item table and had created a WHERE condition to link the HEADER and ITEM table.
Now my layout is pretty complicated..
I want to result to be as below:
header row.... with 0001 Customer name
item row with 0001 0010 price qty
0001 0020 price qty
0001 0030 price qty
header row... field4
(field4 from the header table has to be displayed after the item table has generated all the items and this process should repeat for all header data)
My design in layout is as below
subform1 for headerdata
( set as positioned and has set to 'Repeat form for each data item')
headerdata fields for subform1 (field1, field2, field3)
subform2 for itemdata
(set as folowed)
subform3 for itemdata
(set as positioned, 'Allow page breaks within content' and had set 'Repeat form for each data item')
itemdata fields in subform3
subform4 for headerrow field4
but when I activated and execute the form, the result was wrong.
The result should be like below...
|->field1, field2, field3
|--->field1 charge111
|--->field1 charge211
|-> field4
|->field2
|--->field2 charge122
|--->field2 charge222
|-> field4
but it is printed like below and field4 is overlapped with the item rows if the item rows are more...
DATA
|->field1 field2 field3
|--->field1 charge111 This inner table is overlapping the subform4 for each item
|--->field1 charge211
|
|->field1 field2 field3
|--->field1 charge121 This inner table is overlapping the subform4 for each item
|--->field1 charge221
2) If I have more item data, all the item rows are overlapped with the field4 (which I had explained in my layout) and the item rows are not moved to the next page, but still it is continued in the same page, meaning that if the page can fill 20 lines and my item row are more than 20 lines, 20 lines are printed and the remaining items are not moved to the next page... it is invisible...
How can I solve this issue?
Please help me
Thanks in advance.
Jaffer Ali.SHi Prakash,
Thanks for your reply.
I tried it..... but nothing came out...
Is there any alternative for this...
My Hirearchy is like this...
Main Table (SubformA - MainSubform) set as flowed, repeat for each data item
Maintable-field1 Maintable-field2 (Subform) set as positioned
Inner table (table subform) set as flowed
Innertable-field1 Innertable-field2 (subform) set as positioned
I linked the Maintable and the Innertable in the context in the 'Where Conditions' tab
Kindly review the above hirearchy and reply...
Guys please help me.... I am in an urgent state and need to complete this ASAP.
I will give full points for all of u guys...
Please.... please... please....
Thanks in advance.
Jaffer Ali.S -
How do I get PBS again? Please help!!!
I was able to get PBS when I first got Apple TV after putting in a code, but my cable company recently changed their channel lineup, and I can no longer get PBS on Apple TV. I used to get PBS on channel 314 on my TV, but after speaking with my cable company, I now get it on channel 198, but I can't get anything at PBS on Apple TV. All I get when I go there is the "downloading circle" and nothing happens. The cable company can't help, and I've written to PBS several times with no reply. I thought maybe I could get a different code and start over, but I don't know how to do that. Can anyone help, please. PBS is one
of the main reasons I bought Apple TV. Thanks.I don't know who vaszandrew is, but I (diamond2277) wrote How do I get PBS again? Please help!!!
It got printed and I lost my page so I started over again, and the one above with my question showed (dated May 2, 9:56 am) as if it were an answer to vasndrew.
After I wrote, it occurred to me that maybe if I disconnect my Apple TV and reconnect it, I will get PBS, and it worked. Now I don't need an answer. Thanks to anyone who was going to answer! I have to remember my usual answer to technical problems, UNPLUG, AND START AGAIN. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.
Well, iCloud has nothing to do with this.
Do you have the built-in backup function Time Machine running on your Mac?
See: http://support.apple.com/kb/ht1427 -
I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???
MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter- -
I just updated my iPod touch and all my pictures are gone!!! How do I get them back? Please help!!!
I just updated my iPod touch 4th generation to iOS 6.0.1 and all my pictures are gone!!! Everything else is there but my pictures! How do I get them back? Please help!!!
If the photos were i your iPod's Camera Roll album (taken by or saved to the iPod you can:
- If your PhotoStream is on you can get the last 30 days worth back. See that topic here:
iOS: Importing personal photos and videos from iOS devices to your computer
- Or you can restore from backup if you backed up when the photos were on the iPod.
If the photos were synced to the iPod then you have to get them from where you got them the first time. -
How to acess Database in I18N? Please help.
How to acess Database in I18N? Please help.
I have tried to overide the getContents() method of ListResourceBundle class but it returning an error at run time saying null Pointer exception.
Here are the 2 codes resp.
import java.util.*;
public class Test1
static String string ;
public static void main(String args[])
Locale locale = Locale.ENGLISH;
ResourceBundle myResources =
ResourceBundle.getBundle("MyResources", locale);
string = myResources.getString("HelpKey");
System.out.println(string);
import java.util.*;
import java.sql.*;
public class MyResources extends ListResourceBundle
static String[][] s3= null;
String s6= null;
String s7= null;
public Object[][] getContents()
Object[][] obj= (Object[][])dataBase();
for(int i= 0; i< obj.length;++i){
for(int j = 0;j<obj.length;++j){
System.out.println("GGGGGGGG obj["+i+"]["+j+"]"+obj[i][j]);
//s6=(String)obj[0][0];
// s6= obj[0][0].toString();
//s7=obj[1][0].toString();
Object[][] contents = { {s6},{s7}};
return contents;
private static String[][] dataBase()
{ try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:DSN");
PreparedStatement stat= con.prepareStatement("Select Value,Key from Table1 where Key= ?");
String s1= "HelpKey";
stat.setString(1,s1);
ResultSet rs= stat.executeQuery();
while(rs.next())
String s2= (String)rs.getString("Key");
String s4= (String)rs.getString("Value");
String[][] s3 ={{s2},{s4}};
catch(Exception e)
e.printStackTrace();
return s3; -
I have been trying to sync my iPhone and its not syncing. I've synced it before but now it has gone away. How can I re-sync it? Please help.
you did enable Music syncing in iTunes, yes?
-
my ebay toolbar and the ebay logo that was in my system tray at the bottom have both disappeared when I installed FireFox??? How do I get them back? Please help.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
my iphone 4 screen turns into blue, and i can't do anything because my power button is broken. How to fix my iphone back? Please help me
I am having the SAME exact problem! Except instead of lock button broken it's my home button so I can't do the whole "put in recovery mode" deal. My screen only says "tap the home button 3 times" and it has my screen locked until I hit the home button but since it is broken I can't get in my phone at all. I have all of my work info in my phone so I'm screwed and can't get any help. PLEASE let me know if you find a way around this...!!!
Thanks! -
I bought(own) and gifted(friend) an app which i was charged 2 different prices please help me with this!!!
Apple does not sell an unlocked iPhone. Some cell carriers offer the option to purchase an unlocked phone at a significantly higher price. Your friend could go to Hong Kong and buy an unlocked phone from an authorized carrier but if he has any problems with the phone, he will need to take it back to the country where he purchased it.
-
TS3694 How do i fix error 3194? please help!
How do i fix error 3194? please help!
iOS of your iPhone could be modified / hacked. No one will be able to support you in this Forum.
-
My Ipod doesen't work when I try to connect it on my iTunes! How can I solve this problem? Please help me
Itunes doesen't see the ipod and it is all dark!
Maybe you are looking for
-
Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1
Hi, Our application worked on workshop 8 sp1. After we upgrade system from sp1 to sp2, some of the part doesn't work propertly any more. 1. netui:select seems not bind form data propertly. For drop down list box in forms, although user has chosen som
-
Stoping the print in a print program
Hi, Please can any one tell me how to <b>stop a print from a print program.</b> I need to extract the data from that point to an internal table. madan
-
How can I remotely control a WindowsXP PC?
Hello, I just got a MacMini (my first Mac ever) last week and I've got a friend with XP on her PC. She's VERY new to computers in general and sometimes could use some assistance getting around. I'd like to be able to connect with my new Mac. Does any
-
Cartoon filter in PHOTOSHOP CS
Hey everyone, i was just wondering if there is a plug-in or something for photoshop CS to make a picture look like it is a cartoon. thanks
-
Stroke/Border Disappears When Viewing on HTML File
Hello - I am using Flash CS5.5. I am working on Flash banners and I want to place a 1 pixel stroke/border around each banner. I did the usual, created a new layer, used the rectangle tool, put in the correct stroke number (1 pixel), matched the size