How to replicate .

hi friends ,
i hav installed oracle 10g 'orcl' in my application server OEL 5.5, how to replicate , i need to synchronize what ever the changes that has been done in the database should be reflected in remote machine either local or in remote(via internet),
plz help me how to replicate ...

914884 wrote:
hi friends ,
i hav installed oracle 10g 'orcl' in my application server OEL 5.5, how to replicate , i need to synchronize what ever the changes that has been done in the database should be reflected in remote machine either local or in remote(via internet),
plz help me how to replicate ...Create an standby database.
so the remote server also in read & write mode? then think of Streams or mviews.

Similar Messages

I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?

I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?

What may work is to restore the iPhone fom the backup of the iPod. However, if the two devices ahve different apps that come with the device, that may mess up some of the folders.

How to replicate data from MS SQL Server to Oracle

Hi,
Can someone please help me on how to replicate data from MS SQL Server to Oracle 8i database.

Dear,
I'm a student.
I do simple replication on Oracle 8.0.5 successfully. (one master site and one snapshot site). I only use the SQL*Plus and Schema Manager to do.
But when I do advance replication (multimaster replication) I meet many problem. So I don't get the result.
Do you show me the technology to do that ?
Thanks !

How to replicate data to hana server based on company code?

I have huge data in ECC system related to different company codes in multiple tables.
So while replicating data into hana system i want to pass company code as a parameter for selected tables.
Cos we have size constraints in HANA server.
So plz help to get the selected data.
You have my thanks in advance.

I am a little puzzled by your question. Is your requirement that if you change the parameter, only that data gets loaded into HANA and how often do you intend to change the "parameter"?
You can use IUUC_REPL_CONTENT to restrict the data coming in, for example you can define a where clause such that where BUKRS = 'XXXX' so only XXXX entries get replicated. I recommend to take a look at note 1733714 as this note has the guide which shows you how to define these transformations in the SLT server.
However if your goal is every time, you need to load different company codes, you will probably have to change the transformation, then reload the table dropping all the data you already have loaded. This essentially defeats the purpose of real time replication though.
One other alternative is create different views for different company codes in the source ECC, then use the views for replication. Take a look at this blog for information on how to replicate views.

How does replicate recover trail raw data to the true values?

How does replicate recover trail raw data to the true values?
or
How replicate use the trail file?
recover the trail file col values to a SQL?

user5834416 wrote:
How does replicate recover trail raw data to the true values?
or
How replicate use the trail file?
recover the trail file col values to a SQL?GoldenGate "capture" (extract) parses the redo/archive logs and writes out trail data in a GG-specific, database independent format. The trail contains changed-data events: inserts, updates & deletes (and optionally DDL events.) The GG replicat reads this data and converts the data to SQL to be applied to the target.
The GG trail files are not the same as the data as originally seen in the redo logs (GG is not doing any type of log-shipping of redo logs). The actual data in the trail isn't really important for end-users; it's an implementation detail (much like you shouldn't care what Oracle's redo log format is). But you can use "logdump" to inspect the contents of this (binary) file... again, kind of like LogMiner can be used to inspect archive logs.
There are a number of (conceptual) analogies one can draw between Oracle redo logs & GG trail files. But they're not the same. Your questions are mostly internal implementation details that are not really important for understanding how GoldenGate works. Nonetheless, it is useful to become familiar with logdump for advanced troubleshooting.
Good luck,
-m

Hp Probook 4730s" No Battery Is Detected" How to Replicate BIOS Settings ?

How to Replicate BIOS Settings ? for hp probook 4730s ?
my Battery Is no Detected ? after latest bios update ??
F.60 Rev.A31 Mar 2015
but i want Replicate old BIOS
F.40 12 Mar 2013
to make a battery work and Detected ??
notes : im traing more methods in web sit no success ??

Hello @assail_hawk
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, I recommend to restore the BIOS defaults with this document selecting the reloading the BIOS default settings. This will restore the original BIOS.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to replicate a many to many schema

Hi,
We are trying to replicate a many to many schema as the following:
Table: STATE
Name ¿Null? Type
ID_STATE NOT NULL NUMBER
STATE_NAME NOT NULL VARCHAR2(32)
Table: USER
Name ¿Null? Type
ID_USER NOT NULL NUMBER
USER_NAME NOT NULL VARCHAR2(32)
Table: USER_STATE
Name ¿Null? Type
ID_USER NOT NULL NUMBER
ID_STATE NOT NULL NUMBER
We have a configuration with three nodes, one master node and two slave nodes in each state.
We would like to have a subsetting configuration, where only the Users that belong to the State 1, are replicated to first node, and the Users that belong to the State 2, are replicated to the second node.
Is possible to make this configuration using subsetting rules? We have tried to do that but as subsetting has to be configured only for each table, is not possible to make it work with the three tables working together. For example, if I insert one record in the table USER, it must not be replicated, as it is no associated with any state... after if I insert a record in the table USER_STATE, for this user, making him belong to the state one, it must replicate this record but ALSO the record in the table USER that now belongs to the state 1...
Is possible to get this working? And if it is, how?
Thank you all.

It may be possible to do this using a 1-many custom rule-based transformationon the capture rules.

With a 1-many transformation on a rule, a single LCR is passed into your PL/SQL function as an array of size 1. On return from the function, your procedure will return an array of anydata with 2 LCRs (the original LCR and a newly created LCR ).
 For example: for a change(LCR) that occurs in the USER_STATE table, you can construct an additional LCR for the USER table and return both LCRs to the capture process. You may need to add an additional column (add_column) to associate this new USER LCR with the state. This would be temporary so that this user record can go along the same path as the user_state record. At the destination, you would eliminate the extra STATE column with a delete_column call with an apply rule declarative transformation..

Another variation: if there are only 2 states, you could have a separate capture for each state and just do the 1-many transformation on each capture. In this case, it would not be necessary to add an temporary state column to the LCR.
Both of these solutions will have an impact on performance, as a PL/SQL function is called every time the rule that includes the custom transformation evaluates to TRUE.

How to Replicate Fonts in PSE 8

I don't know a better way to phrase the question. Basically, I wanna photoshop someone's name onto a birthday cake. I found a picture of a cake that says "Happy Birthday" already and I want to add the person's name. How to I add the name in the same font style used on the cake in the picture? Does that make sense?

The software isn't going to replicate the fonts used.
If the name has the same letters as in Happy Birthday, you could select each letter needed on a separate layer and "write" the name. You'd probably also have to soften the letter's edges to make them blend in with the cake.
If you can find a similar font, you could use the text tool and write out the name. There are lots of freeware font sites that have oodles of fonts. You might get lucky and find a similar one.
You might be better off simply finding a cake without lettering on it. Use the text tool to add all of the lettering yourself. You can add a style to the letters like maybe one of the icing styles on the Adobe exchange.
This link below will take you to the correct page with icing inserted into the field. They say for Photoshop but they'll work in Elements. Depending on your images resolution, you might have to adjust the style's scale to taste.
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=icing&search_exchange=16&searc h_category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&star tnum=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=

How to replicate 'memberOf' attribute to global catalog server

Hi,
I am trying to replicate 'member of' attribute to global catalog server, to get the data from child domain where trust is enabled.
i did a little reserach and found that 'isMemberOfPartialAttributeSet' should be true to get it replicated to global catalog server.
in schema, i am trying set 'isMemberOfPartialAttributeSet' true for "is-member-of-DL" attribute and getting illegal modification.
is there any other way, where i can modify (or with help of Microsoft).
OS: windows 2003 R2 (SP2) - MSDN
Thanks!
Karthik
Thanks, Karthikeyan R

Hi Karthik,
Based on my tests, the right way to modify attributes that replicate to the Global Catalog is:
Open Active Directory schema snap-in.
Then locate the attribute which you wish to modify.
Right click on it, and select Properties.
Tick the check box “Replicate this attribute to the Global Catalog”.
Here is a screenshot for you:
More references below:
Install the Active Directory Schema snap-in
http://technet.microsoft.com/en-us/library/cc755885(v=WS.10).aspx
How to Modify Attributes That Replicate to the Global Catalog
http://support.microsoft.com/kb/248717
Best Regards,
Amy

How to replicate a customized condition table from ECC to CRM

Dear All,
We have created a new condition table in ECC, using a new set of key fields to define sales district specific product price. This table is in ECC only and we would like to replicate it to CRM. Could you please let me know how we can do that? What replication object should we use?
Thanks in advance!
Erinn

Hi,
Use DNL_CUST_CNDALL, this would create the database table in CRM. Also you might need to run other loads corresponding to your scenario like DNL_CUST_CND_PR, DNL_CUST_PRC etc
Regards
Prasenjit

How to replicate customer fields in the backend system.

Hi All,
I need to transfer PO customer fields that were created in the SRM system to backend SAP system.
I am using Extended Classic Scenario in SRM and SRM Version is 5.0.
I am able to replicate the data created in SRM system to the backend.
How ever, I found the following BADI while debugging.
1. BBP_DOC_SAVE_BADI
2. BBP_CTR_RELVAL_ICC
3. BBP_DOC_SAVE_ICC
4. BBP_F4_SAVE_DB
5. HRSYNC_P
Hence, please tell me which BADI, I need to use to send my customer fields to the backend system.
Regards,
Venky.

Hi
As Disha told, You need to create a customer Implementation of any othe BADIs using SE19 Transaction.
Say, you create an active customer Implementation of BBP_ECS_PO_OUT_BADI...
See links given in earlier reply for detailed sample code.
Write the following sample code (pls change it as per your business requirement)
METHOD if_ex_bbp_ecs_po_out_badi~bbp_b46b_po_outbound.
** Customer fields
MOVE 'POHEADER' TO w_customer_fields-refobject.
*PO approver
MOVE 'ZZAPPROVER' TO w_customer_fields-fieldname.
MOVE is_header-zzlastapprover TO w_customer_fields-container.
APPEND w_customer_fields TO ct_bapi_customer_fields.
*SC Date
MOVE 'ZZSCDATE' TO w_customer_fields-fieldname.
MOVE lv_scheader-created_at TO w_customer_fields-container(15).
APPEND w_customer_fields TO ct_bapi_customer_fields.
*Requester Org
MOVE 'ZZORGA' TO w_customer_fields-fieldname.
MOVE w_requester_orgunit TO w_customer_fields-container.
APPEND w_customer_fields TO ct_bapi_customer_fields.
endmethod.
BBP_PO_INBOUND_BADI in R/3.
method IF_EX_BBP_PO_INBOUND_BADI~BBP_MAP_BEFORE_BAPI.
data wa_customer_fields TYPE BBPS_IF_CUSTOMER_FIELDS.
data : WA_BAPI_TE_MEPOHEADER type BAPI_TE_MEPOHEADER,
WA_BAPI_TE_MEPOHEADERX type BAPI_TE_MEPOHEADERX.
data WA_EXTENSIONIN TYPE BAPIPAREX.
data txt_960(960) type c.
*** EKKO Customer fields.
*PO Number
move BBP_POHEADER-PO_NUMBER to WA_BAPI_TE_MEPOHEADER-PO_NUMBER.
move BBP_POHEADER-PO_NUMBER to WA_BAPI_TE_MEPOHEADERX-PO_NUMBER.
*ZZAPPROVER
READ TABLE BBP_CUSTOMER_FIELDS INTO wa_customer_fields
WITH KEY refobject = 'POHEADER'
fieldname = 'ZZAPPROVER'.
IF SY-SUBRC EQ 0.
MOVE wa_customer_fields-container TO WA_BAPI_TE_MEPOHEADER-ZZAPPROVER.
WA_BAPI_TE_MEPOHEADERX-ZZAPPROVER = 'X'.
endif.
*ZZSCDATE
READ TABLE BBP_CUSTOMER_FIELDS INTO wa_customer_fields
WITH KEY refobject = 'POHEADER'
fieldname = 'ZZSCDATE'.
IF SY-SUBRC EQ 0.
MOVE wa_customer_fields-container TO WA_BAPI_TE_MEPOHEADER-ZZSCDATE.
WA_BAPI_TE_MEPOHEADERX-ZZSCDATE = 'X'.
endif.
*ZZORGA
READ TABLE BBP_CUSTOMER_FIELDS INTO wa_customer_fields
WITH KEY refobject = 'POHEADER'
fieldname = 'ZZORGA'.
IF SY-SUBRC EQ 0.
MOVE wa_customer_fields-container TO WA_BAPI_TE_MEPOHEADER-ZZORGA.
WA_BAPI_TE_MEPOHEADERX-ZZORGA = 'X'.
endif.
CLEAR txt_960.
CLEAR WA_EXTENSIONIN.
write WA_BAPI_TE_MEPOHEADER to txt_960 left-justified.
WA_EXTENSIONIN-STRUCTURE = 'BAPI_TE_MEPOHEADER'.
WA_EXTENSIONIN-VALUEPART1 = txt_960(240).
WA_EXTENSIONIN-VALUEPART2 = txt_960+240(240).
WA_EXTENSIONIN-VALUEPART3 = txt_960+480(240).
WA_EXTENSIONIN-VALUEPART4 = txt_960+720(240).
append WA_EXTENSIONIN to BAPI_EXTENSIONIN.
CLEAR txt_960.
CLEAR WA_EXTENSIONIN.
write WA_BAPI_TE_MEPOHEADERX to txt_960 left-justified.
WA_EXTENSIONIN-STRUCTURE = 'BAPI_TE_MEPOHEADERX'.
WA_EXTENSIONIN-VALUEPART1 = txt_960(240).
WA_EXTENSIONIN-VALUEPART2 = txt_960+240(240).
WA_EXTENSIONIN-VALUEPART3 = txt_960+480(240).
WA_EXTENSIONIN-VALUEPART4 = txt_960+720(240).
append WA_EXTENSIONIN to BAPI_EXTENSIONIN.
endmethod.
Hope this will help.
Regards
- Atul

How to replicate configuration changes in Felix to publish instance

Hi,
I have made some changes in configuration under Felix 'Configration' tab.
i.e., added few mapping rules in 'Apache Sling JCR Resource Resolver'.
Now, how do I replicate these changes to a publish instance? I hope I don't need to make the same changes again in publish, one by one?
Thanks!!

You should create env specific config and manage it through package.
http://www.wemblog.com/2012/10/how-to-work-with-configurations-in-cq.html
Yogesh

How to replicate Generic data source from R/3 to BI

Hi,
I have created generic datasource in r/3 using view. I replicated to BI.
I selected for DataSource (RSDS) instead of selecting 3.x DataSouce.
Now what r the steps to load data into cube.
Please help me in this regard. Please give me detail steps to proceed further.
Thanks,
Jaswantha

Hi,
About Generic Extraction:
In Sometimes the Standard Extraction Does not Satisfy the Customers Needs that time We have to use Generic Extraction.
generic extraction is also classified in to three types
using
1. View
2.Infoset query
3.Function module.
Procedure:
-->Go to Tcode : RSo2,
-->There give the name of data source which you want to create like
transaction data source or master data attribue or Text data source.
-->enter
-->again in the next screen you need to give application like SD or MM
etc
-->in the same screen need to select table/view or infosetquery or
function module. these are different ways of creating data sources.
-->Give the name for the same like if u r creating data source on table
give the name of table.
-->click on Generic delta which will there in application tool bar and
fil the required columns in that screen like type of delta and all
-->continue and save
-->it will give all the fieds
-->enable the check boxes based on your requirement like selection or
hide or field only..
-->save
please see the below links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Re: Generic Extractor - Delta
Re: Generic Extractor - Delta
Please do check the link for step by step for generic xtraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
service.sap.com/bi -> BI InfoIndex
sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
Assign points if useful.

How to replicate only a subteee or a branch of complete DIT

Hello,
Is it possible to configure replication as explained below:
1. on master server single suffix dc=foo,dc=bar (single database 'userRoot' ). This suffix have branches : ou=people,dc=foo,dc=bar and ou=groups,dc=foo,dc=bar. Both these branches contains thousands of user entries and group entries.
2. on Hub server one suffix dc=foo,dc=bar (database userRoot) and two subsuffixes "ou=people,dc=foo,dc=bar (databasename 'people')" and "ou=groups,dc=foo,dc=bar (databasename 'groups')".
3. On consumer server single suffix "ou=people,dc=foo,dc=bar (databasename "userRoot or people")"
Replication flow Incremental:
Master -> Hub -> Consumer
Here what I want to achieve is to replicate only a part of my subtree (or a branch of my complete DIT) to consumer server. The master server is having all the entries (people and groups entries). And on consumer I want to have only people entries stored under ou=people,dc=foo,dc=bar branch. The DS documents explain suffix and subsuffix and also replication on different chapters. But I could not locate how to achieve the above scenario.
Thanks to give your advise or any link.
P.S. I know about fractional replication. But this is not what I want to achieve. I want to replicate only a branch of the DIT.
Regards
Randip Malakar

You can only replicate complete databases. You can't do what you describe.
ALL of the systems (master, hub, consumer) all need to have corresponding databases. You can't replicate one database to three databases as you describe for master -> hub.
You need to break up the master into the same three databases (suffixes) as you describe for the hub.
Then you replicate bd/suffixs independently.

How to replicate schema to other database

Hi,
I have a database of version 11.2.0.3 and running on version Enterprise Version 5.
On this database, I have a application which resides on a schema called -> APPS (Size of it being 8G)
I need to setup the same schema in a DR site and replicate the whole data continuously so that if there is an issue in primary site, I can switch to the DR site.
I cannot setup a Dataguard (physical standby) configuration in this database as there is another application which resides on this database and that application basically does the replication by itself to the DR site (The application is Oracle Content Management)
I am thinking of 3 options. Appreciate if you could please suggest me the best option and also pointers on how to implement them.
1. Set up Materialized View in both Primary and DR database schema so that the schema gets refreshed continuously
2. Implement streams and replicate the data across the schema's (Both from Primary db to DR and viceversa)
3. Move this application (schema) to a new database with Physical Standby Dataguard configuration.
Since the schema is of a very small size (8G), i want to try options 1 and 2 before trying option 3. i.e. creating new db altogether.
Thanks!

877343 wrote:
I need to setup the same schema in a DR site and replicate the whole data continuously so that if there is an issue in primary site, I can switch to the DR site.- If you need Disaster Recovery Solution ->
3. Move this application (schema) to a new database with Physical Standby Dataguard configuration. Oracle Data Guard provides the management, monitoring, and automation software
infrastructure to create and maintain one or more standby databases to protect Oracle data from
failures, disasters, errors, and data corruptions. Data Guard is unique among Oracle replication
solutions in supporting both synchronous (zero data loss) and asynchronous (near-zero data loss)
configurations. Administrators can chose either manual or automatic failover of production to a
standby system if the primary system fails in order to maintain high availability for mission
critical applications.
- If you have good knowledges in "Materialized View"(More Developer Role than DBA).
1. Set up Materialized View in both Primary and DR database schema so that the schema gets refreshed continuously- Streams -> complicated for beginners.
2. Implement streams and replicate the data across the schema's (Both from Primary db to DR and viceversa)+
Try Oracle Golden Gate!!!

How to replicate .

Similar Messages

Maybe you are looking for