How to report and verify counterfeit products?

If you have a suspected counterfeit Lenovo product, how do you verify it and report it to Lenovo? There should be a web site or contact number for this, but I haven't found anything.

Hello,
I would suggest contacting Lenovo support for the product/product line in question via phone and reporting the issue to them.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

How to install and verify the license file on ASA 5512-x

Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish Kumar

Hi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf

OBIEE - How pause report and jobs - feed DW by ETL

Hi Experts,
I need to known, how can i block to run reports and existings jobs, during feeding my Data Warehouse by ETL.
User could be schedule new job, but this job will be running after refresh data on DW.
Thanks.
Edited by: user9051847 on 2013-04-26 09:19

Verify your repository design and make sure that you have defined count aggregate on fact column. You would also need to define the content level of each dimension in fact table.

How to report a store selling apple products without authorisation

Please help they will not refund after just one week......I've since found out that they are not an authorised reseller..... How do I report them to apple?

Anybody or business can sell Apple products. If they are not an authorised Apple reseller they can't say they are... From what I understand authorised reseller do not have to follow Apple's return policy.

How are reported and drafting misspellings found in a book?

I found some spelling errors and drafting in the books I read but can not find who to contact to report them and corrected.

You could try emailing the Publisher directly, and posting Reviews. Apple is just a store and is not going to correct anything. But you could bring it to their attention by using the Report a Problem link on your receipt.

How to create reports and infosets in E recruiting

Hi we are planning to create reports and infosets in E recruiting module Though I am not a developer I need to write functional designs for creating reports and Infosets.For the same I need to know what should be our approach and what all things we should keep in mind.and how creating reports and infosets is different from the ones in SAP R/3.
Thanks and best regards
Rajeev

I am sorry but your question does not seem to make much sense.
Can you please rephrase your question?

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Product ID for Enterprise Query, Reporting, and Analysis package

Hi Experts,
I try to install Enterprise Query, Reporting, and Analysis package(CD number : 51033475)
Installation setup asks the Product ID,
How can i find the correct Product ID for this installation,
Regards

For Partners and SAP, the license id is contained in a word document that is in the Download Manager.
We are also trying to install this package, but it seems only the SAP drivers and not the BO Enterprise is contained in the Service Marketplace file.
Just wondering if you have experienced the same thing.
Best regards,
Steve

Urgentpls : How to find the Oracle reports and forms version in Unix prompt

Hi,
How to find the Oracle reports and forms version in Unix prompt.
Please give the steps
Thanks

I need to check the version of Oracle forms and reportsExample :$ frmcmp.sh -h | head -1
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
$ rwrun.sh 2>/dev/null | head -2 | tail -1
Report Builder: Release 10.1.2.0.2 - Production on Wed Mar 10 11:17:55 2010
$

How to group all the reports and execute like single application ?

Hi,
I am trying to develop some reports in Crystal Reports XIR2 , here i have Design and Preview options that is for every report i should see , how to group all the reports and execute like single application?
any option is there to run the report
i mean is it possible to have a home page from there have links to each report and when i click on the link corresponding report should be shown , if it is possible , How?
Regards,
kathyaini

You will want to look into Crystal Reports Server, it does exactly what you describe and more:
http://www.businessobjects.com/product/catalog/crystalreports_server/
Download a trial of CR Server here:
http://www.businessobjects.com/product/freetrials.asp

How to schedule and e-mail reports in OIM 10g

Hi,
Could you please let me know how to schedule and e-mail OOTB reports in OIM 10g.
When I click on reports tab and try to run a report, I see the report displayed on the screen and has an option to export to CSV format.
I could not find a place where I can specify the scheduling interval or the set of e-mail recipients.
Looking forward to hearing from you,
Many thanks in advance

You can write your own schedule task to do the same. You can use the existing Stored procedures which are used by OOTB reports to get the desired report.
You can also make use of API: http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_903/doc_cd/javadocs/operations/Thor/API/Operations/ReportOperationsIntf.html

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

How to create a custom report and include multiple extended CRM database?

I have created a number of CRM databas extensions and applied all there fields to my contacts and cases.
I might have for example:
- Additional address details
- Business information
- Quote Details
- Trade Referees
I know how to run a custom report and that I can select any one of these extra CRM databases as a filter and included them in the report. Is there a way though to add more than one (preferrably all) of the extra CRM databases to the report?
The onely ways I can see it work is by either include all fields in one extra CRM database (not ideal) or bu running multiple reports and merge them somehow in Excel.
Is there another way that I am not aware off?
Thanks for your help,
Jerun

Hi Jerun,
There's no way to do that. You'll need to run separate reports and merge them in Excel.
-m

How to Call and print the output eBusiness Report

Hi
I have gone through all the posted threads to see whether any of the thread solution matches my requirement. But, I couldn't find any.
I have a report which is registered in eBusiness and I wanted to run the report and wanted to show the report output in APEX.
How can I achieve this?
Appreciate your Help.
Regards
Kiran Akkiraju

i have thought a code like below...but its missing...please look at the comment line on the code...i hope i am on the right way...please correct me
response.reset();
          ServletOutputStream cikti=response.getOutputStream();
          BufferedImage servletResim=new BufferedImage(150,50,BufferedImage.TYPE_INT_RGB);
          Graphics2D graf=(Graphics2D) servletResim.getGraphics();
          graf.     // here i must get the image file from hdd path but how?couldnt find any valid method?
          JPEGImageEncoder enkoder=JPEGCodec.createJPEGEncoder(cikti);
          enkoder.encode(servletResim);
          cikti.close();

How to create a report and summarize some columns per page

Hi all,
I need to create a HTML report using the OA Framework Extension and it needs summarize some values columns highlighted similar to what can be done when using Report6i. Is there some class or package or a region or page's parameter that permits me to do that?
I also thought to summarize the values and put them in a table with a column saying that the line is a simple value or a summary and just put those values in html table. My problem still how to hightlight the html table line when the value "summary" is being fetched.
Any suggestion????
Thanks in Advance!!!

Essentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM

How to report and verify counterfei​t products?

Similar Messages

Maybe you are looking for

How to report and verify counterfeit products?