How to Report on Hourly Basis from BW in HH-MM(not on 0calday)

Hi Pals,
I need suggestions as my current user wants to report on every 2 hours(and staged into BW ODS) based on Time(HH-MM). Though we can bring details in BW on every 2 hrs but the issue is how to bring the Time characteristics in HH,MM. Requirement is to keep track of orders and deliveries with a precision on Time(i.e 12:10 PM). And when ever there is a chnage in OLTP box then based on scheduled extract it must reflect the time in hours and minutes.
Robert and party do you suggest to make chnages to existing Extractors and cast a new InfoObject in extracts to bring such kind of details. If yes then we need to create this as NUMC(0CALDAY is lowest Time characteristics).
Please suggest and let me know if this is possible then what are the pros and cons for this approach. I clearly agree that this kind of details can be best brought from OLTP box.
Sanjeev

Hi,
Since you are going to load very frequently, please consider note 620361 in terms of problems to expect. BW is not (yet) build for such high frequency loads. (too many admin overhead.) In BI 7.0 a new ODS type for direct update is available. This has no activation queue and less admin. Purpose to directly update from 2LIS** or your kind of scenario. Isn't it possible to build or use a remote cube scenario ? For the time registration as stated use 0TIME.
Kind regards, Patrick Rieken.

Similar Messages

How can i retrieve deleted photos from iphone if i did not sync them with itunes

How can i retrieve deleted photos from iphone if i did not syn them with my itunes

If they were photos taken with your iPhone and you have Photo Stream activated through iCloud they are in the cloud. If not - they are in the wind.

HT4915 How do I delete unwanted music from an iPad that does not show in iTunes on the computer?

How do I delete songs from my iPad that is not in my iTunes library on my laptop? The songs appear to be from iCloud, but I don't sync to the cloud. I sync to my laptop. I am not using "Match".
Mick

Welcome to the Apple Community.
Settings > Music > Show all music > Off

How do I delete unwanted music from an iPad that does not show in iTunes on the computer?

How do I delete songs from my iPad that is not in my iTunes library on my laptop? The songs appear to be from iCloud. I sync to my laptop. Show All music is off. iTunes Match is off.

Welcome to the Apple Community.
Settings > Music > Show all music > Off

HT201302 How do I delete a photo from my camera roll and not delete it from a folder

When I delete photos from my camera roll, it also deletes them from the folder I've saved them in. How do I delete from the camera roll and not lose them from the folder?

"When I delete photos from my camera roll, it also deletes them from the folder I've saved them in. "
Correct. There is only one photo and it is in the camera roll. The folders you create are just a way to organize the pics. it does not create a duplicate pic.
Just as a song is in your library and a playlist, a pic is in the camera roll and the folder.
If you delete a song from the library, then it is gone. The same is true of pics.

How do you get deleted data from the app Tote M'Notes back on iPad ????

How do I get deleted data from app Tote M'Notes back???...Not displaying in my notebook anymore...also how do i retrieve data from apps stored in Icloud?

Why don't you use the fully-qualified-domain-name (FQDN) of your GW and perform a re-direct to this ?
This should be known (and everytime the same), addtionally you won't have any problems if there's any load balancer in between or in fron of the GWs.
Secondly you'll have problems to get the IP -address if there's any proxy server involved.
/ulf

How do you burn a dvd from imovie if computer does not have idvd anymore?

How can I burn a dvd from imovie if this computer does not have idvd? is there anything in mountain lion that will allow this simple task to be completed.'
When i try to finish a project in iphoto it wont even do that...can anyone help?

Buy iDVD.
Yes, there are other programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
http://www.apple.com/findouthow/movies/idvd.html
With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
IDVD is easy to get. It is available on disk as part of iLife 11.
IDVD is a wonderful piece of software and well worth the low cost of $40. (works with all Mac OS 10.5 and newer.)
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

HT1420 how do i deauthorize a computer from i tunes i do not own anymore.

how do i deauthorize a computer from itunes i do not own anymore

If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five, (Please Note: this can only be done Once every 12 months) and then re-authorize your current Computer(s) one at a time.
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420

How do I stop my songs from skipping? They will not play at all.

How do I stop my IPhone 4s songs from skipping? They will not play at all but they are all there ready to play.

My iphone 4 is skipping songs and voice control is coming on randomly. I think it is a headphone problem. I used a non-apple set of headphone that do not have a mic and it worked as expected. When I used Apple headphone it skips and voice control turns on. It's annoying.

How to report on dates between From and To dates

Hi forum,
I have a requirement to report on Long Term Absences from work. The user wants to enter a calendar month in a selection variable, and see who is away from work in that month.
I have the start and end dates of absences, but these are long term absences which span across months. The problem is, if I base the Calendar Month variable on the start date or the end date of the absence, people get missed off the report.
For example, if we have someone on maternity leave for a year, the user wants to be able to enter any month within that year, and see that the person is on maternity leave. So I cannot use the start date or end date of the absence as it is.
How do I get the report to run such that when a user enters a month, it will show everyone who is absent on any dates within that month? I assume I need some kind of customer exit variable for this, but is there a standard SAP delivered variable which will work out all possible dates within the start and end date? Or do I need to write some code myself?
I couldn't see anything in the forum already which would help me on this, but if there is an existing thread, please also let me know.
Many thanks
Mischa

Hi Mischa.
I think you can achieve what you want like this
Add the Start Month and End Month (let them be IO's that reference 0calmonth) to your cube and populate them in the load using a formula, like Aron suggested.
Create a query with a restricted key figure. I suppose you are looking at some kind of count to know how many people where absent in a given month, or something like that. Thus, add your KF to the structure and add the Start Month and End Month to the selection.
Restrict the Start Month using a variable, ZMONTH (this is what the user will enter at runtime), as follows:
Start Month <= ZMONTH.
Now restrict the End Month using a variable, XMONTH (this will have to be an exit variable filled in CMOD by reading ZMONTH) as follows:
End Month >= XMONTH.
Thus, your restricted key figure will only return values if the entered month is part of the absence interval. The abap you need for CMOD should be simple as all you are doing is reading a variable and passing it to another. From the top of my head, it should look something like this:
data:
l_s_range type rsr_s_rangesid,
loc_var_range like rrrangeexit.
case i_vnam.
the case statement will likely already be there, as well as the above definitions, so look for the case and insert the below
when 'XMONTH'.
if i_step = 2.
clear l_s_range.
loop at i_t_var_range into loc_var_range
where vnam = 'ZMONTH'.
l_s_range-low = loc_var_range-low.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
endloop.
endif.
endcase.
this will likely already be there, so you won't need to put it there again.
Good luck!
Jacob
Edited by: Jacob Jansen on Jan 11, 2010 9:18 PM
Edited by: Jacob Jansen on Jan 11, 2010 9:30 PM

How to create an Installed base from the sales order

Dear Friends,
could any one let me know the process of creating an Installed base with the below process.
Once a sales order is created in SD, an istalled base need to be created in CRM system with reference to sales order.
There are around 50 final products and approximately 2000(BOM)components for each product exists. but the client wants to maintain only few components
like 100 to 200 components in Installed base.
In CRM system, can we maintain Installed base Template with that 100 or 200 components. If yes, how do we assign the Individual objects(Serial numbers) to each component.
Regards,
Ven

Hi Ajay
there can be two possibilities
Option 1. Create Install base in CRM while creating Sales order in ECC using RFC CRM_IBASE_CREATE. Make some reference of sales order in the Ibase. later when you move equipments to CRM then you can attach these equipments to Ibase (Already created in Thru RFC)in Badi CRM_EQUI_LOAD(This BAdi is called while moving equipments from ECC to CRM).
Option 2. Don't create Ibase at the creation of Sales order. but while creating Equipment just add some indiacator in the equipment to know which sale sorder this equipments belongs.
and once these equipments moves to CRM. Using the BADI CRM_EQUI_LOAD you can club all the equipments(of same sales order) under one ibase.
Regards
Naresh

How to get 24 hour clock from date

I want to get time from date object in 24 hour clock format,how do I do that?
thanks

Use SimpleDateFormat
http://java.sun.com/products/jdk/1.2/docs/api/java/text/SimpleDateFormat.html

How do you update installed base from crm Product Hierarcy

does anyone know the steps to update an ibase from crm product hierarchy? Can the data from the product Hierarchy be replicated to the install base via config?
any help would be appreciated????

Hi Shannon,
no, it's a free update. The procedure goes like this:
1. BACKUP!!!
2. Unplug all peripherals but your original Apple keyboard and mouse
3. Repair permissions before and after an update! (click the link and read it!)
4. Download and apply the Mac OS X Update 10.3.9 (Combo)
5. After the restart repair permissions again.
Do NOT use the computer during the update!!!
[ Edited by host. Please see the terms of use 4.2.2, http://discussions.apple.com/help.jspa#terms ]

How do you delete duplicate songs from your iPhone that do not show up in your iTunes library?

everytime i purchase songs on itunes and sync them to my iphone 4, the songs downloads twice. one as the actual song, and the second one doesnt do anything. when you click on it, it just skips to the next song and doesnt play anything. also this second song has this cirlce dot thing next to it when i am scrolling through my songs in my music...so how do i get rid of this second download? its really annoying to have and it wont let me delete it off my phone. alsoooo since it doesnt show up in my itunes library, i cant delte it off there either! HELP PLEASE

On the springboard, locate the app you want to delete. For this example, I’ll use WeatherBug.
Tap and hold down the icon of the application you want to delete. After a few seconds your screen will start to “wiggle” and an X will appear next to each of the apps you’ve installed via the App Store.
Tap the X next to the icon of the app you want to remove. When prompted, selectDelete.
And now it’s gone.
If the application is listed in your iTunes Applications as well, you’ll want to remove it from there – or else it will re-install the next time you sync. Alternately you can keep the app in your iTunes Applications, and set iTunes not to sync all applications, just the ones you want to keep. See the Applications tab of your device the next time it’s connected in iTunes for syncing options.
http://www.simplehelp.net/2008/07/12/how-to-delete-apps-from-your-ipod-touch-or- iphone/

How can I get a refund from another country that does not have an Apple Store?

While going to the US for the summer, I went to the San Francisco Apple Store.
I saw the Apple Gift Cards, and I was wondering if they would work on my Taiwan Apple ID, so I bought a $25 gift card and a 4 cards bundle pack each with $10 inside.
But then now, coming back to Taiwan, I realised the gift cards was only valid for US users so I asked for support from Apple
and this is what they replied:
I understand that you are unable to redeem the gift card to your account, the card purchased in another country. I know you must be eager to get this issue resolved at the earliest. I can do my best to help you.
Jonathan, I'm sorry to inform you that, iTunes Gift Cards are only redeemable in the iTunes Store for the country that is listed on the back of the card. I apologize for any inconvenience this may cause.
This did not help me at all...
There is only resellers in Taiwan, so there is no way I could get a refund from Taiwan
so what should I do in order to get my money back?
Or in other ways, an exchange upon other Apple products?

I have now got an openoffice which I got from the internet. But the main thing is I paid £20.99 for this app and It is irriatting that the people who work for apple havent got back to me when I first reported a problem. I reported to them again and hoping that they will eventually get back to me.

How to Report on Hourly Basis from BW in HH-MM(not on 0calday)

Similar Messages

Maybe you are looking for