How to report on specific zlocations

Hi All,
We are using a variable to fetch the values for zlocation. The requirement is the client want to report for all locations where the second and third letters are 'ZA'. How do i get this.. quick response appreciated..
Ankit

Hi Ankit,
In the Bex variable input window, type +ZA*
The + character is used as a single character wild card.
Cheers,
Tanish

Similar Messages

How to add a specific order type into any particular report

Hi All,
How to add a specific document type(order type) into any particular report in order to review OTD performance.
I need to add one specific order type to existing reports which will help to check the performance of the delivery type for that particular order type to the users.
Thanks,
Raj

Hi Rajesh,
thanks for the reply when i tried as the way you said.. but the system is asking more details like varient. so if you can clearly specify the process for order type (VOV8-- table TVAK) so it will helpful for me.
Thanks
Raj

How to set user specific Layout for executing IW38/IW39 report.

Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.

Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How to generate reports for specific products sold in e-commerce

Hello,
I am going to start letting products from other manufactures be sold in my online store and do a percentage split of the profit with the manufacture. I was wondering how to tag those specific products and generate a report on how many products were sold and what the gross income was from those products. This will make the quartly accounting so much easier....
Thank you for any help...

Supplier - Choose a supplier that you source this product from. Setting this value is useful for when you report on your sales to see which supplier products are most popular.
Commission Payable % - The commission percentage number is stored for each product in an order. If you have to pay commissions to suppliers for selling their products then setting this number allows you to run reports that calculate the final amounts for you.
Yea I found this stuff eairlier but the question is how do you actually run the report and how do you set up a supplier? I don't see why this is so hard it should be in the custom reports section of the reports tab. Then make new eComerce report, then pick supplier then filter for sales by supplier. But there is no filter for sales... just a filter for status and country. And I would think that you would add a supplier to the affilate program but that is actually for something else entirely. Sorry this is probably very simple and I am over complicating it...
Thanks for your help...

How to monitor a specific transaction in Solution Manager ?

Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.

Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker

How can i print specific pages against searched word or name (in one print command) from 1000 pages

how can i print specific pages against searched word or name (in one print command) from 1000 pages

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

How to open a specific file in projector.

Hi to all
can any body tells me that how to open a specific file in
projector with an application not in browser????
and also want to add a button to mute the sound just like in
intros with fade in and out effect.
its urgent....
Thanks in advance

Hi,
You can use FlashJester JStart
http://jstart.flashjester.com
that will open up any file the has been associated in Window
Explorer.
Download a FREE evaluation copy and try it for yourself.
Please look at the example files given.
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

How to find a specific word in sentence in each line?

How to find a specific word in sentence in each line and output will show start from the beginning from specific word plus with small description from each sentence?
For example: I need to find a "+Wednesday+" and "+Thursday+" word in each sentence by line by line from "myfile.txt".
Go ballet class next Wednesday.
On the Wednesday is going to swim class.
We have a meeting on Thursday at Panda's.
Then it will show the output:
Wednesday : ballet class
Wednesday : swim class
Thursday: meeting at Panda's
I am going to figure out in Java console to read from a file for specific word from each line and how to make it output in correct way. I know already to make input/file codes.

I got it and understand much better. Thank you very much. There is a problem with it because I knew how to make
a specific word in sentence but how I should make Output for specific word and some words from sentence.
For example:
Input:
+"On Thursday go to ballet class"+
+"Swim class on Friday one time a month at 2 p.m."+
I used the codes for that:
class FindSchedule{
     String firstline = "On Thursday go to ballet class ";
     String secondline = "Swim class on Friday one time a month ";
     FindSchedule(){
          System.out.println(firstline + findTheIndex("Thursday", firstline));
          System.out.println(secondline + findTheIndex("Friday", secondline));
     public int findTheIndex(String word, String sentence){
          int index;
          index = sentence.indexOf(word);
          return index;
     public static void main (String[] args){
          new FindSchedule();
}The output will be:
Thursday: ballet class
Friday: 14:00 swim class one time a week
Notice that time is changing in output complete different from input.
I need to find out how to extract some words from each sentence for output. Do you know how to do it?

How to search a specific topic in a forum?

How to search a specific topic in a forum? who can offer me a solution. I'm really appreciate it.

Enter something in the box next to the words Advanced Search at the upper right and click on the button to display a list of search hits. Then, in the box to the right of the list, click on the word help to bring this Search Help and Tips page up:
http://search.java.sun.com/search/java/help.jsp

How to print a specific cell in numbers

how to print a specific cell in numbers?

Copy the cell (contents), Paste onto a page of a separate document, or onto a separate sheet of your Numbers document, Print.
Or insert a single cell table onto your Numbers document, type an = sign in the cell then click on the cell you want to print. Drag the new table to a second sheet, set up your page there, and print.
See the Numbers '09 User Guide for other useful tools and techniques. Download the guide via the Help menu in Nuimbers.
Regards,
Barry

How to report on balance sheet accounts using 0EC_PCA_3

Hi Experts,
How to report on balance sheet accounts using 0EC_PCA_3
Thanks
nagini

Hi,
IF you want to see the accumulated balances you need to select the period from 0 to 12.
EX: you want to open the report up to period 6th 2009 and want see the figures including the carryforward balances from 2008.
then in selection screen select the from period = 0 and to period =6.
hope its helpful
thanks,

HT2513 how do I share specific events on my calendar with others?

How do I share specific events on my calendar with others?

To share an entire calendar via mac and icloud you will either need a iCal server or to login with your icloud account with the computer you want the calendar on. I find the easiest way to share calendars is to sync your calendar with Google Calendar. Login to Google Calendar, under the "My Calendars" Tab on the left side, find the calendar you would like to share. Hover over it with the mouse and an upside down triangle will appear a little to the right of the calendar name. Click on the triangle and click share this calendar.

How to enter a specific vendor for the delivery costs in purchasing order?

Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.
<i>
<b>No one would like to answer this question?</b></i>
Message was edited by:
King Qi

hi,
You can have vendor at each condition record level.
try it out.
cheers
Rav

[solved] How to source a specific commit in a Git package?

Hi there,
I wonder whether it is possible to use a certain Git commit in the source array of a package.
Example:
freshplayerplugin-git
For debugging purposes I would like to use the commit
8ff0bd0282205802c482c7d47f216feb0d3394a9
I tried the following in the source array and it successfully built the package:
source=('git://github.com/i-rinat/freshplayerplugin.git#commit=8ff0bd0282205802c482c7d47f216feb0d3394a9')
However, I have no idea how to detect whether it actually built from the specific commit or just skipped the #commit appending.
Does anyone know how to source a specific commit?
Thanks ahead!
Last edited by orschiro (2014-07-17 11:21:17)

Correct syntax for Git repository as a source would be:
source=('git+https://<repo-url>#[commit|tag|branch]=<ref>')
To verify it's building correct tree, and moreover to keep sane when dealing with multiple trees I like following pkgver (check https://wiki.archlinux.org/index.php/VC … Guidelines):
pkgver() {
cd "$srcdir/<repo-name>"
printf 'r%s.%s' "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)"
producing something like:
<package-name-git>-r4.34e558d-1-any.pkg.tar.xz
Also just going to fetched Git tree and checking out what's there is an option (look for makepkg branch), for example:
$ git show-ref
34e558d2ef8b2cae212da3ab3f74513a99f9ee1b refs/heads/makepkg
86350ab5a3a209de4339ef04d75d27c7bd399746 refs/heads/master
86350ab5a3a209de4339ef04d75d27c7bd399746 refs/remotes/origin/HEAD
86350ab5a3a209de4339ef04d75d27c7bd399746 refs/remotes/origin/master
Last edited by mkoskar (2014-07-17 09:13:11)

How to report on specific zlocations

Similar Messages

Maybe you are looking for