How To Reporting Quiz By Email
hello, i am from indonesia,
i have some problem, when i reporting quiz (captiva 5) by email isn't work,
chronology:
1.) I created a new project,
2.) when this project i publish to swf, the button isn't function
can u help me, please.. thx
Welcome to the Captivate User Forum.
The most likely reason your button is not working is that you are currently testing it from a folder on your PC Hard Drive or a LAN network drive and you do not have that location set up as a trusted location in your Flash Player Global Security settings. (Google for information about setting up Flash Global Security, or search other threads on this forum where how to do this is explained already).
If you have access to a web server, upload your content to there and test. (Make sure you upload the HTM and SWF and JS files that Captivate produces, not just the SWF.) From a web server you do not need to set up Flash Global Security.
However, even when you DO have this working, you need to be aware that Email Reporting is NOT very reliable because there are many problems that can be encountered due to different web browsers and security limitations on individual end-user computers. You cannot control these issues. So we usually recommend NOT to use email reporting. If you intend to upgrade to Captivate 6 in future you will find that Email Reporting has been discontinued for this reason. It was just too much trouble.
Similar Messages
-
How to embedded oracle report data in email body from forms?
Hi,
I am working on oracle forms and report 10g and i am new to this. I want to knw How to embedded oracle report data in email body ?
Regards
ShrutiI have uploaded a sample . This might help
http://www.alexyscorp.com/send_report_email.zip -
how to report employee thief to adobe, safe harbor, and your partners, there is no email, no phone, spent 1 hr 26 min with Adobe support, and after I gave him permission to access my computer, I had to ask him if he was having a problem, than I receive a security notice that the software program is not from a confirmed web site and was downloaded to an unknown web address, when I asked the support
person if this was the program, I did not see https or a lock and he sail it was ok it was him.
I notice he had deleted some files and was in process of changing my security logins files and change wifi and proxy, when I tried to stop him he locked my mouse so I had to power off computer. after that there was a virus installed on my computer,
I have spent the last 3 hrs getting a different virus protection software to clean my Hard drive.
I want this guy fired,
Funny I have been trying to get in touch with adobe since March 29,2015, no emails and when I got someone one the phone he could not under stand me, but I can understand why since he could
not speak english, WOW Great support ADOBE.
I bet I will get there attn. now.
anyone have another way to contact this great company?I am unable to get the numbers about the first imd I contacted adobe, but was able to get the chat records if that would help, my computer is fried, I have been spending last 2 days trying to remove the virus and ad wares, I have been told looked like I will have to erase the drive an install every thing from scratch
-
How can I print and email a report with a logo?
How can I print and email a report with a logo?
Is this possible??hi ravikant!
im talking about reports, not forms.
i bet se78 is for forms and oaer is for report.
because my logo is displayed on screen, using html-top-of-page.
but at the time of printing and email, internally, alv grid is converted into alv list, and alv list doesn't support having a logo.
That's my know-how of the situation.
Do you have a way with it???
Please advice.
Thanks a lot! -
How to send result of a report as an email
hi experts,
how to send the result of a report as an email to the user.
plz help
regards,
malleswari.Hi,
Check this Weblog:
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Check these link as well..
http://www.sap-img.com/abap/sending-email-with-attachment.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I did a search in the forum, an di found lot of threads to send mail from ALV ....
Look at the below threads
How to send ALV list report as html attachment in a mail??
https://www.sdn.sap.com/irj/sdn/forumsearch
How to send ALV report by mail
Re: How to send an ALV Grid Report to SAP user mail ?
Re: How to send an ALV Grid Report to SAP user mail ?
Have a look at below code:
REPORT ZSENDEXTERNAL.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Send External Mail'.
Mail Contents
OBJTXT = 'Minimum bid : $250000'.
APPEND OBJTXT.
OBJTXT = 'A representation of the pictures up for auction'.
APPEND OBJTXT.
OBJTXT = 'was included as attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
*OBJBIN = ' O/ '. APPEND OBJBIN.
*OBJBIN = ' | '. APPEND OBJBIN.
*OBJBIN = ' / '. APPEND OBJBIN.
*DESCRIBE TABLE OBJBIN LINES TAB_LINES.
*OBJHEAD = 'PICTURE.BMP'.
*APPEND OBJHEAD.
Creation of the entry for the compressed attachment
*OBJPACK-TRANSF_BIN = 'X'.
*OBJPACK-HEAD_START = 1.
*OBJPACK-HEAD_NUM = 1.
*OBJPACK-BODY_START = 1.
*OBJPACK-BODY_NUM = TAB_LINES.
*OBJPACK-DOC_TYPE = 'BMP'.
*OBJPACK-OBJ_NAME = 'PICTURE'.
*OBJPACK-OBJ_DESCR = 'Representation of object 138'.
*OBJPACK-DOC_SIZE = TAB_LINES * 255.
*APPEND OBJPACK.
Completing the recipient list
RECLIST-RECEIVER = '[email protected]'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
*RECLIST-RECEIVER = 'SAPUSERNAME'.
*RECLIST-REC_TYPE = 'P'.
*APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT RECLIST.
WRITE: / RECLIST-RECEIVER(48), ':'.
IF RECLIST-RETRN_CODE = 0.
WRITE 'The document was sent'.
ELSE.
WRITE 'The document could not be sent'.
ENDIF.
ENDLOOP.
WHEN 1.
WRITE: / 'No authorization for sending to the specified number',
'of recipients'.
WHEN 2.
WRITE: / 'Document could not be sent to any recipient'.
WHEN 4.
WRITE: / 'No send authorization'.
WHEN OTHERS.
WRITE: / 'Error occurred while sending'.
ENDCASE.
Reward points if this helps.
Manish
Message was edited by:
Manish Kumar
Message was edited by:
Manish Kumar -
HT4865 how can i report a phishing email with an icloud address?
I got an email purporting to be from Apple requesting my email user name and password for my iCloud account. The return address is an iCloud.com address. Obviously, I know it was a phishing email, but is there some way to forward it to Apple so they can see if it actually did originate from an iCloud address?
Hi Gail,
I’m answering your question because I’ve received so many spoof/spam messages lately to my email address(es) at me.com. I decided to find out how to report them.
Here’s what I found out:
Suspicious email messages can be forwarded to one of the following;
[email protected]
[email protected]
Make sure to include the long header.
Long headers can be displayed using the menubar (see below)
Then either copy & paste the long header or simply forward the entire message.
Example of long header from a suspicious email:
“From: Kikki Howard <[email protected]>
Subject: Kiss to you
Date: June 9, 2013 4:21:21 PM PDT
To: [email protected]
Return-Path: <[email protected]>
Received: from nk11p00mm-smtpin004.mac.com ([xx.xxx.xxx.xxx]) by ms04574.mac.com (Oracle Communications Messaging Server 7u4-26.01(7.0.4.26.0) 64bit (built Jul 13 2012)) with ESMTP id <[email protected]> for [email protected]; Sun, 09 Jun 2013 23:21:21 +0000 (GMT)
Received: from hakahakajkfbczj.googlemoogl.tk ([91.191.18.62]) by nk11p00mm-smtpin004.mac.com (Oracle Communications Messaging Server 7u4-27.05(7.0.4.27.4) 64bit (built Apr 23 2013)) with SMTP id <[email protected]> for [email protected] (ORCPT [email protected]); Sun, 09 Jun 2013 23:21:21 +0000 (GMT)
Received: from nwk-txn-msbadger0204.apple.com (nwk-txn-msbadger0204.apple.com. [xx.xxx.x.xx]) by xx.xxx.x.xx with HTTP; Mon, 10 Jun 2013 01:21:21 +0200
Original-Recipient: rfc822;[email protected]
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.10.8626,1.0.431,0.0.0000 definitions=2013-06-09_07:2013-06-08,2013-06-09,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0 ipscore=0 suspectscore=14 phishscore=0 bulkscore=53 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=6.0.2-1305010000 definitions=main-1306090279
Dkim-Signature: v=1; a=rsa-sha256; c=simple/simple; d=hakahakajkfbczj.googlemoogl.tk; s=hakahakajkfbczj; h=from:subject:date:to:content-type; bh=tL+/wJmQOT1qfRAmSggBixqXyEIqt839Zb4SbOAPNOM=; b=…lggV4PzuGc/TkDUNdlU=;
Message-Id: <[email protected]>
Mime-Version: 1.0 (Apple Message framework v936)
Content-Type: multipart/mixed; boundary="-4277442969-183115831-7904244676=:70228 ”
You can find more info at:
http://support.apple.com/kb/HT4933?viewlocale=en_US
http://support.apple.com/kb/TS4019
b/r’s, ab/simsboynton -
How do I include the quiz taker's name in the Quiz Results email?
I'm using Adobe Captivate 4. I want to include the quiz taker's name in the Quiz Results email. Is there to do this?
My experience with Captivate is minimal. Once again, the version that I am using is Captivate 4. I am not using an LMS. When someone takes a quiz and submits it, the email that I receive only contains the quiz ID and the test results themselves. I would like to be able to have the results include the user's name or at least his/her email address. Is their something that I can do with a variable to accomplish this? Or, is their some sort of third party widget available?
Thanks Gene -
How do i report Spam BT emails to BT?
Have had two email from BT ( i know they are not from BT) asking for login details etc (not sending anything back to these idiots)
Looks like they have come from BT addys (maybe someones account is hacked already)
Think BT should know about these spam mails so who or where should i send them?Just regarding your last post, I have copied an email received from BT during April.
As you can see there are some changes to their email conditions occurring in June
Important changes to your BT email terms
Hello,
We're changing the terms and conditions for accessing the email that comes with your BT Broadband - BT Yahoo! Mail.
From 17 June this year, you'll need to log in to your email account at least once every 150 days. If you don't, we'll presume you don't use your email account anymore and we'll close it.
Read our new terms and conditions.
How to keep your BT email
Make sure you use your email at least once every 150 days by logging on at bt.yahoo.com or using your computer email software (like Microsoft Outlook or Mozilla Thunderbird). If you don't, we'll close the account and delete everything that goes with it - including your emails, contacts, calendar and notes.
But if we close your account, you can still use the email address to log in to BT Wi-fi or other BT services. You just won't be able to use it for email.
If you use Flickr
This change won't affect the email address you're using to log on to Flickr just yet (that's the photo sharing site that you access with your BT Yahoo! email address). We'll contact you again later this year to let you know when the changes will affect you.
Make it easier for us to get in touch with you
The next time you log in to bt.com, make sure the email address you used for My BT is one you check regularly. If it isn't, change it to one you do.
Change your contact details now.
Need some help?
To find out more about these changes, go to bt.com/help/emailterms.
Thanks for choosing BT.
Warren Buckley
Managing Director, Customer Service
Please don't reply to this email - it's been automatically generated by our computer. If you need to get in touch, go to www.bt.com/contact -
How to send as an email the spool request?
Dear Experts,
My last post was Email background schedule report to gmail or yahoo mail .
I got solution but it's work as a notification which we can say the after report run it triggers mail that report is completed as this time.
But i required the thing how to send a spool request of a report as an email attachment.
it will be in .xls or .pdf or xyz format.
It was the additional task which was required by my organization.
I also want to know the following things.
1. what is sap default configuration and system behind it.
2. what the things abaper have to check.
3. what is bcs_examples & where do i found these bcs_example8.
Please guide me to explore my knowledge.
Thanks & regards
Nayan Lad
Note for moderator : Sir, I will close request at 2:30 pm today onward, so please do not lock it.
Moderator Message: All your questions can be answered by searching.
Edited by: kishan P on Nov 13, 2010 3:29 PMneed solution..
-
How do I get my email address recently changed on my account in iTunes on my MacBook Pro to show up on the sign-on notice on my iPad (4th gen)? It reflects my old email address and therefore won't recognize my password. When I try to do something on the App Store on my iPad, it brings up a notice to sign on, which reflects the old email address, and rejects my password since the username/email address is no longer correct. Puzzled!
I have another question for the community. My daughter tells me that my texts to her show my primary email address as the account name of the sender (me) when I text her, rather than my cell phone number from which I'm texting her. I've had others report that to me too. How do I turn that off so that recipients see my cell phone number displayed as the sending party and not my email address? Thanks -
-
Automating ADHOC query reports to generate Emails
Hi Experts
Hope you guys are doing fine.
I have a requirement where we need to automate the ADHOC query reports to trigger emails with the Excel attachment of the report to a set of users.
To explain in detail,we have some adhoc queries which are run manually on monthly basis(by our functional guys).Once the output report is generated,they used to download them into Excel document and send that to a set of users as an email attachment.
Now we are planning to automate the entire process,so that these query reports once set to run on monthly basis should trigger emails to set of users with the excel attachment.
Now,i am looking for solution on how to proceed on this.Since the program behind the query(which starts with AQ*) is not be a modifiable program,i can write any custom code here.Alternately,i planned to set a background job which runs the query and then use a custom pgm which reads the spool no for the pgm and then to read the data from the spool into an internal table and then use a FM to send the internal table data as an email attachment.But wasn't sure of what FM's to use to read the spool no. and data from the spool.
Is there any alternate way to work on this or any suggestions on my assumed process would be really appreciated.
ThanksOk, here's what you do:
- Go to T/C: SQ01 and find your query
- From the menu at the top select Query>More functions>Display Report Name (copy the report name)
- Go to Transaction SO23 and create a new shared distribution list - give it a name and title, click the dropdown on folder and click the create folder button, give the folder a name and save/green tick.
- Click on the Dist. list content tab and enter all the external email addresses that the report should go to ( the recipient type should be internet address or via internet or something like that)
- Go to Transaction SM36 and click on the Job wizard button, go through the wizard entering the program name we copied earlier. In the print parameters section make sure it is set to print immediately, then on the spool list recipients button select the dropdown box, select distributions lists and find the one you created earlier. Define the variants, periods, time etc etc
- When the job runs it will process the output via SAPConnect (transaction SCOT) you will be able to see the status of the emails by going to transaction SCOT and selecting the menu option Utilities>Overview send requests.
Job Done, Chillax
PS: remember the output type of the query in SQ01 needs to be set to excel or whatever you require otherwise a PDF/html attachment will be created in the email.
PPS: If SAPConnect is not set up in your system speak to your basis guy to set it up - If you don't have any basis resource, it is really easy to set up, plenty of guides around. -
Hi all report that sends email shows popup window needs to be supressed
hi all
i have developed a report that sends email as an attachement, but this report pops up a window in the end ( it says 'no of objext sent') and there i have to press enter, but my report is running in the background (scheduled report) and therefore there should be no pop ups in the report.
question is how to avoid popup window in the following program.
below is my code
just enter your email id in the code and it will run anywhere.
TABLES: ekko.
*PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using " p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 1 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using "p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver value '[email protected]',
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'.
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
thanx
rockyhi rocky,
pls comment the submit program form INITIATE_MAIL_EXECUTE_PROGRAM by default the email runs in background and there is no need to submit 'rsconn01' it again to that program where u actually get the pop-up...
try it
hope this helps
regards,
karthik -
New document: How to avoid known PDF email attachment problems
Have you ever had problems with PDF attachments sent from Adobe Reader for iOS using Share > E-mail Document?
You may find this document useful to avoid the problems.
How to avoid known PDF email attachment problems
Please let us know if you have encountered different types of problems with PDF attachments. We can look for solutions or workarounds for you.Unfortunately, we (Adobe Reader mobile team) do not know if/when Apple will fix the attachment problems (software defects) in Apple Mail.
In particular, the attachment problem with Microsoft Outlook (See Problem #2 in How to avoid known PDF email attachment problems) appears to be a long-standing defect that has been known for years. However, Apple has not provided any fix for Apple Mail yet.
Adobe Reader for iOS merely launches Apple Mail (the default mail app on iOS) to send a PDF document as an attachment. Adobe Reader has no control over whether or not to embed a preview image of an attachment in the body of an email message, which is known to cause the problem with Microsoft Outlook (on the receiving side). The same problem happens when you send a single-page PDF document as an attachment along with an email signature from Apple iBooks on iOS.
For now, all iPad/iPhone users can do is to avoid the problems by using the workarounds that are described in How to avoid known PDF email attachment problems.
When new and different problems with PDF attachments are reported by Adobe Reader for iOS users, we will update the document above.
Sorry for the inconvenience. -
Report Distribution through Email (secure)
Hi,
I have tried emailing reports using SMTP and would kile to know if it is possible to do a secure email using Oracle Reports9iAS in-built 'report distribution via email' feature.
If yes, how can this be done?
Thanks,
BharatBharat,
I now get what you are exactly looking far ( I wasn't sure earlier)
If you are looking for enxryting the mail content before sending, then you should go for a pluggbale mail destination. Tou could also explore oracleWireless destination wihc could be sued for mail destination. I beleive oracleWireless webservice mail destination supports encryption of mail body
I was undarstanding that, you are probbaly don't want to have the receipients ids not exposed in the reports URL. This can be achived by reports bursting/distribution nand you can repeat on a goup which has a db column having mail ids
Thanks
The Oracle Reports Tea -
CP4 Access/Excell import - Quiz result email sending
Hi - sorry for my bad english - i'm good in order a beer, but in technik a loser, so don't beat me.
First question: is there any way to fill up a quiz-pool from a Access or Excel database?
Second question: What can i do to send the result of the quiz to a email-account?
I have insert a email-address, but it is not working - maybe i have to do more ?
Thanks a lot for your help.
Friendly regards, Wolvo
PS.: If it helps for more understanding i can send this in german tooHi Lilybiri - thanks a lot for your help.
If a customer like to create a big quiz perhaps for schools a.s.o. is the work on the base very time expensiv.
The quiz-pool in CP4 is helpfull, but not very good to handle - so it's maybe a good idea, to got a extern data base.
I have reporting to a email address anabled, and on the end of the quiz appears a buttun "send" without any function.
Maybe it is a problem of CP4 with W7 64 bit?
It would be very helpfull to report the resolved test to a email.
Friendly greetings, Wolvo
Maybe you are looking for
-
As stated in my above Subject field. I have an older Macbook Pro and I was attempting to move my iTunes media file using this article: http://support.apple.com/kb/ht1449 After getting to step number 14, I "thought" I selected the correct media file t
-
I can't update apps because iphone 5 is asking for the password to a different itunes account
In my settings under iTunes and App Store I am signed in with my iTunes account. However, when I go to update apps it asks me for the password to a different iTunes account - that of my partner who also uses my iMac. I've tried signing out and signin
-
I purchased a video clip (no audio) from a web vendor and the file is a .mov format. It plays fine in Windows Media Player. When I try to import it in PE7 with the Add Media function the file selection window will not even show the .mov file. It is n
-
Hi, Can someone point me to a blog or article which shows real life scenarios for Context handling functions as I want to practice what I have read. I have already read some articles on these functions(removecontext, usoneasmany etc) and I underst
-
hi, i have a route.cfg specified routing all messages for a specific domain off to the ip address of an exchange server. usually works well but problems with the exchange server means some messages are not being delivered, but instead of the message