How to reprint a posted GR document

hello guys:
During execute GR by MIGO, normally we tick the Print option to let the document printed after posting. But in same cases, the user forgets to choose the option, then of cource no document is printed.
The question is: in such case, how to reprint the posted GR document? I can not find a standard transaction to do so.
Regards.
Andy

Hi Andy,
The only way I know of doing this is to go to the Messages screen for the first item on the document via MB02, and manually add the output type details to the document.
You will need to look at a document that printed successfully to get the appropriate output type, medium, partner, and communication method.
Regards,
Monika

Similar Messages

How to automatically printed Posted FI documents

Any idea about how to automatically print SAP FI documents as soon as they are posted?
Regards
Prabin

Hi
As such there is no such standard feature but what you can do is to get the small ABAP code written , which will activate on the saving of the document. Please note this may slow down the process.
Alternate, There is option of executing report S_ALR_87012287 at line item level which can be taken on daily or weekly basis .
Regds
Rajiv

How to stop the posting of documents when there is an error in record

Hi,
I have one issue with respect to posting of documents.
In my Exl sheet there are 1900 records which would split into 950 records during run time.
For each 950 records a document to be created. Here the issue, during test run thers is no error where all the validations are done and records in xl sheet are correct.
However when posting, i am submitting to to standard program rfbibl01, where it is creating the session and output of the program is not showing any errors - report.
During execution of session, it is creating document for 1 set of 950 records and for 2 set it is finding some error and not creating any document.
Now my requirment is as follows: since there is an error in second set, i don't want to post any record starting from the begining. No document should be created.
In my program once i have submitted to standard document i don't have any control over the progam in stopping the creation of session or document creation.
Any solutions are most welcome.
Thanks in advance.
Regards
Harikrishna
Edited by: Harikrishna yoganarasimhaiah on Feb 1, 2008 7:45 AM
Edited by: Harikrishna yoganarasimhaiah on Feb 1, 2008 7:48 AM
Edited by: Harikrishna yoganarasimhaiah on Feb 1, 2008 7:50 AM

Hi ,
Use the FirstVisibleRow property of the table , bind with some attribute containing the index of the selected row...
Regards
Yash

How to reverse Manually Posted COPA documents?

Hi Gurus,
We have posted some doucments in COPA through KE21N. Some of the documents are not correct, hence distorting all figures in reports.
Please guide, how to reverse / change them?
Regards,
Amir

HI,
use again KE21N with the same characteristics and inverted values to "reverse" the document. There is nor reversal functionality within KE21N.
Best regards, Christian

How to Bypass Tax Jurisdiction Code while Posting FI Document

Hello All,
   I have a requirement where I can enter Tax code along with Tax Jurisdiction for some of the cases while Posting FI Document using T code s FB01.. etc.
However for one scenario I need to BY pass the Tax Jurisdiction while posting FI Document . How to achieve this.
As per SAP once we define Tax Jurisdiction it is mandatory to enter as Input to Post the document.
But I need to control this Tax Jurisdiction as I dont want to enter while posting FI Document.It should not prompt for Tax Jurisdiction .
How to make an option field in this case (Based on Company code and Tax code combination).
Any BADI / User exit/BTE to Ignore the Error message Enter Tax Jurisdiction code).
Please help me as soon as possible.
Thanks.

My Query is , when am posting a document in FB01 Transaction , when I enter Tax code at line item level, Tax jurisdiction is mandatory if we dont enter it give an error saying that ' Please enter a Tax Jurisdiction' .
   My requirement is I would like to bypass that error without entering Tax jurisdiction I would like to proceed by providing default Tax Jurisdiction through any userexit/BADI/BTE. so that I will not get that error .
   So any USER-EXIT/BTE/BADI is there which will trigger before the error(maintain tax jurisdiction ) at line Item leve ?????
I hope now requirement is clear.

How to Post a Document earlier Put on HOLD (F5) -through MIRO

Hi SAP Experts
can any one explain
how to the document on hold and how post that document i put on hold
tocde and paht
Regards
sure

hi,
1) goto transaction:
FB01 - document - get held document(f5)
2) fb11 - list
A.
Message was edited by: Andreas Mann

How to update the posted documents with Business Area wise

Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West

How to restrict the posting document from the parked user

Hi All,
Please help me in the below requirement
The requirement is, need to restrict the posting of document by the same user, who has parked the document.
For this I did the code changes in BTE: 00001140 by copying the function module:
u2018SAMPLE_INTERFACE_00001140u2019 into new function module asu2019 Y_IB_FI_PROCESS_00001140u2019
In this I have restricted as
IF ( sy-tcode = FV60 or
sy-tcode = FV50 or
    sy-tcode = FBV0 ).
IF i_parked = u2018xu2019. " document has already been parked
      READ TABLE t_bkpf INDEX 1.
      IF t_bkpf-usnam EQ sy-uname. " park user = current user ?
        t_exctab-okcod = 'BU'.    " do not allow to post
        APPEND t_exctab.
      ENDIF.
    ENDIF.
This function module is getting trigger while parking and posting the documents
While posting the document, the parameter i_parkedu2019 is not getting the values as u2018Xu2019,
To get the values as u2018Xu2019 for the parameter: i_parked what can I do?
Can you please help me, is there configuration side need check?
Or do I need to write code some where else.
Thanks in Advance
Rambabu .A
Cross-post

Hi
Well, in such a case, it might be justified... BUt again, I would ask how would you differentiate between What USER1 can park and what can he post?... Certainly, it would be by means of fields like Doc Type, etc...
Else, if you leave it to the discretion of USER1 and give him both the authorizations, why would he like to park when he can post the doc?
Anyways, now coming to the BTE, each BTE uses a structure... For eg: BTE 1120 uses BSEG_SUBST... If the fields you desire are not available in the structure, then you can also enhance the structure... See if you can enhance the structures involved and achieve the result
Regards
Ajay M

How to change posted billing document

Hello every body,
I want to know how can we modify sales office field on posted billing document.
We want to change in mass two years of document. ( We are running on Ecc6.0)
Regards,
Mercedes.

As suggested, you CAN - technically - have a program directly update the table. However, there are two potential problems with this.:
1. If you have application issues with this - or subsequent problems with the invoice data, SAP will not support you.
2. A direct update will not cause statistical data (i.e. SIS structures such as S001, S004 or a custom structure) to be updated.

How do you open a adobe document that i did on photoshop cc on ios. i want to do this because i want to post this photo on instagram

how do you open a adobe document that i did on photoshop cc on ios. i want to do this because i want to post this photo on instagram@

Ahh, you're likely right, station.
If that is the case, why even bother with iOS? Doesn't Instagram let you upload on a desktop computer?
@official_knicks: Use File > Save for Web to save your open document in a format Instagram accepts. (JPEG and PNG are the formats, I think.)

How to do collective/mass posting of documents parked through T-code: MIR7

Hello,
I just want to know if we can do collective posting of documents parked through T-code: MIR7 (Invoice Verification)? If yes, please give me the T-code and teach me how to do it. Right now, we can do mass posting for the direct FI documents only (T-code: FBV0). I tried it several times for documents parked through T-code: MIR7, but the system always prompts an error message saying that "Document cannot be posted since
document balance is not zero". But when I display and post the document one by one the system allows me to do so. Then I thought that maybe because it was created in logistics, mass/collective posting should be done under logistics also.
Thanks & Best Regards,
Odette

I could not see any such mechanism in MIR7. It is not possible to post them in mass. (logistic invoices)
Whereas FI as you said can be done in FBV0. You can even create batch and post through SM35.
Regards,
Ravi

How do post Hold Document

Hi Sap Experts,
How do post Hold document and What is the T.code.
After Posting the hold document i would like to see the hold document numbers .
Thanks & Regards,
Prabhakar

Hi,
To Post a Hold document, enter T.code F-02 and in menu --> Document --> Get Held Document(F5).
You can give document number and the user name, if you dont know document number than click document list in application menu, it will display all held documents.
Regards,
Raj

BAPI_ACC_DOCUMENT_POST how to post a document relate with assets

Hello all,
I'm using this BAPI to replicate the financial accounting flow. I've achieved to post almost of document types but asset documents. I've got the following error:
"Account 'Contra account: Acquisition value' could not be found for area 01"
For example i'm trying with a document like this:
U100 1 70 17000000 000002000000 0000 1,000.00 USD
U100 2 31 00403201 adasdasdad 1,000.00- USD
I don't have any trouble when posting from FB01, but when i try to post the document across this BAPI i got the previous error. I'm pretty sure that the problem is because the bapi (i don't know what i'm doing wrong) is trying to retrieve the contra account: acquisition value), this account is not customized (because is not necessary for our requirements). When i post from FB01 the acount retrieved is: Acquisition:Acquis. and production costs.
Has anybody tried to post an assets document with this BAPI?
Thank you very much!

Hello
Offsetting Account Number
In this field the R/3 System determines the offsetting account for the
item, as long as the account is maintained in the corresponding account
assignment.
It's a clearing account or another name used in this connection is
contra account. The defintion for the contra account is:
The contra account is for an asset acquisition posting, provided
the posting was not an integrated posting with Financial Accounting.
Another example is the offsetting account for revaluation:
Reconciliation account for appreciation to the acquisition and
production costs of assets.
Information:
the offsetting account is triggered in ABZON
for the depreciation areas that post to GL in real time.
Also, any acquisition done by ABZON gets updated to all ledgers
within the same ledger group.
Unfortunately you cannot limit the posting of the APC to some
ledgers only.
If you put an offsetting account in ABZON, system will post the
acquisition to the leading and the non-leading ledgers too: the
problem is that it will post into the countra account defined for the
area 01 (leading ledger) because it is the only one that post to GL in
real time.
The other area will get the posting to the other account because it is
not in real time the posting.
Hope this helps
Ray

How to handle line item for posting a document

Hello,
I am using a function module to post a document, so far I have hard coded all the values in the test program. I am passing two internal tables to the function module, one which has header data and the other which has line item data. So far I have written the following code to get the line item details:
it_bseg-BUKRS = '001'.
it_bseg-GJAHR = u20182010u2019.
it_bseg-BUZEI = '001'.
it_bseg-BSCHL = '31'.
it_bseg-WRBTR = '900'.
it_bseg-PSWSl = 'USD'.
it_bseg-SAKNR = u20180000123456u2019.
it_bseg-HKONT = u20180000123456u2019.
it_bseg-LIFNR = u2018001234567u2019.
append it_bseg to lt_temp_bseg.
clear it_bseg.
it_bseg-BUKRS = '001'.
it_bseg-GJAHR = '2010'.
it_bseg-BUZEI = '002'.
it_bseg-BSCHL = '40'.
it_bseg-WRBTR = '900''.
it_bseg-PSWSL = 'USD'.
it_bseg-KOSTL = '1111871234'.
it_bseg-XKRES = 'X'.
it_bseg-HKONT = '0000564738'.
it_bseg-FISTL = '1234556000'.
it_bseg-GEBER = '0000001'.
it_bseg-fkber = '0'.
append it_bseg to lt_temp_bseg.
clear it_bseg.
Now I want to get rid of the way I am handling the line item and want to handle it based on what user enters. For example right now only line item is being considered but if user enters two line items then what should be the approach.
Thank you,
Rajeev Gupta

Any Suggestion.

How to update WBS Element in already posted FI documents

Hi All,
I would like the procedure to update the WBS element in already posted Finance documents. We have Fund center is also activated in our system.
Kindly suggest the procedure for the same please.
Thanks and Regards,
Sarvendra Negi

Hello,
All PS_PSP_PNR fields, as COBL-PS_POSID are dependent on the
project settlement. By posting a document you can enter the fields
independent of the fact, whether the project settlement is active or
not. Only the field status is crucial. As soon as such a document is
changed, the activity of the project settlement is relevant.
If it's active, these fields must not be changed in general.
Otherwise you would get a inconsistency between FI and CO, because
there is no interface updating the project settlement tables
In this case TBAER (transaction OB32) does not play a role anyway.
But if the project settlement is not active, the fields can be filled
informatively by posting the document. And thus there must be a
chance in FB02 to change them again. Therefore the settings of TBAER
are crucial and TCOBX must not be changed like in note 966428.
Furthermore the entries of TCOBX are used in the coding for different
queries. So it would be very critical to change these entries.
The only solution can be, that you adapt TBAER accordingly. In the
standard it is not possible.
BR,
Raquel

How to reprint a posted GR document

Similar Messages

Maybe you are looking for