How to reput a mono track when it's in stereo?

I search how to put a track in mono when it's in stereo, we can do it easily on logic pro 9 but i don't find in logic pro X... Thanks!!!

I can't find it, for example, If I want to put the output of a stereo drums in a mono output I can't do it because I must to choose the stereo drums, but on logic pro 9 I can do it (to output a stereo instrument in a mono output even if it transform it in mono it's not a problem, it's to use on a analogic mixtable...)
Thanks!

Similar Messages

  • How to play 2 mono tracks to separate speakers

    I have two audio tracks each containing a single mono channel and want to play them simultaneously with one appearing through the left speaker and one through the right speaker.
    How could I achieve this?
    BTW: this is running on Linux
    TIA
    john

    Thank you very much, was very helpful!
    Von: Ann Bens [email protected]
    Gesendet: Sonntag, 3. Februar 2013 12:44
    An: hpwagner
    Betreff: How to edit 2 mono tracks at the same time
    Re: How to edit 2 mono tracks at the same time
    created by Ann Bens <http://forums.adobe.com/people/Ann+Bens>  in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion <http://forums.adobe.com/message/5043936#5043936

  • How to make 48 mono tracks into 24 stereo tracks

    When I opened a Final Cut Pro project in Audition 5.5 the Final Cut Pro project had 24 stereo pairs.  The Audition project has 48 mono tracks.  How do I convert every pair of mono tracks into a stereo track?

    The FinalCut XML format that is used to send this only accomodates mono clips on mono tracks (just like FinalCut itself). If it supported Stereo clips on Stereo tracks like most DAWs or PremierePro, then it wouldn't really be an issue.
    That being said, the linking between two adjacent clips in a stereo pairs in FinalCut doesn't transfer over because this version of Audition CS5.5 doesn't have the ability to group clips.   If the source audio files are originally stereo, you could save the session as a SESX, and then perhaps make a script to modify the XML to change all the tracks to stereo, and find and combine 2 mono clips referencing a stereo file, and just make a single stereo clip.  I'm not sure if that explanation helps (or even makes sense).
    Perhaps you could post the session, and I could give more direct advice.

  • How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

    Hi guys,
    Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues....  :-)
    Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-)  ......
    Query :    How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
    Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
    I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
    Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
    Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
    Thanks

    There are various ways to do this in Audition 3. here's one.
    Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

  • How can I 'join' audio tracks when importing audio book?

    HELP!!
    In the latest version of iTunes, 11.0.1, I can't find the 'JOIN Tracks' button which is needed when importing an audio CD to keep each disc treated as one book instead of storing each chapter as a separte entry.  Without this, I can't find a way to keep the chapters to play in proper order as each CD, starts with chapter 01. 
    Thank you for your help

    Join CD tracks
    When you import songs from a CD into iTunes, you can group songs so they always play together (even when you’re shuffling songs).
    Insert an audio CD into your computer’s CD or DVD drive, and click No in the window that appears.
    When the songs on the CD appear in the iTunes window, hold down the Shift key to select the ones you want to join.
    Click near the top-right of the iTunes window, and choose Join CD Tracks.
    http://support.apple.com/kb/PH12278

  • Help, How to export multiple mono tracks?

    I have eight tracks of master audio that has been captured to FCP with the video. I have sent the timeline to soundtrack to create individual mono timestamped BWF for each track (very important).
    I have each of the tracks submitted to submixes. When I play the timeline you can see that each track has distinct audio assigned. Now when I export, telling the program to export all submixes, it only puts audio on tracks one and two. It is however creating 8 wav files.
    Now here is the odd thing, it was working for the first 4 day of the shoot. Now it has decided to crap out. Was I just getting lucky before, and if so. What settings should I have to achieve what I need.

    Yes, we are. The problem is unique, meaning that when we try aiff exports the full 8 channels right properly. But wav files don't only right the first two. We need to use wav since the tracks will be going to pro tools for the conform and mix.

  • How can I change next track when I using head phones ? I mean with out device help with headphone

    HiAm using iphone4 with ios5 I have simple question how can I change to next song when I am using head phone, it's very difficult to open my phone and change to next track Is there any way to do this

    See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Here  >  Apple  Support  iTunes Store  Contact

  • How to change mono track on left only to mono track on both left and right

    How do I change mono track on left only (coming out left speaker only) to mono track on both left and right (coming out both speakers)? Thanks!

    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Create 2 stereo tracks from 2 mono tracks

    If I send a FCP sequence to a STP mulitrack project it opens with a left channel (A) as the on camera mic and the right channel (B) as the wireless mic. Since I want both to come through both channels I assume I should make the edits/corrections on both, then insert 2 new blank tracks. I'll then copy/paste each of the previously mono tracks so I have 2 stereo track, right and left A and right and left B. Does this sound correct or am I missing something here?

    No. One work around would be to create a stereo sub mix channel, this would at least give you a single fader but it won't help you when editing. You could try grouping the video and two audio, then they should be easier to select.

  • Question about stereo vs. mono tracks. (Very basic, but appreciate help)

    I’m still a little confused about Stereo Vs. Mono tracks when recording in Logic. (This might sound stupid, but I’m still getting confused by this stuff.)
    When first recording a track, do you guys usually do it in mono or stereo?
    Secondly, I’m still confused about the benefits or stereo tracks. Why not just record mono and then pan a track left or right when mixing? I’m just not getting the concept of stereo recording. I know these are very basic questions, but I’ve read numerous books and I’m still a little in the dark on this. Thanks for the help!

    Most of the things I record are done on mono tracks. Each piece of a kit goes to its own channel, then I pan things accordingly later (Overhead L & R, etc.).
    You only need to record in stereo if you actually have a source that is stereo, i.e. a keyboard with stereo fx and L&R outputs, but even then I usually just set up two mono tracks, one for L and one for R. I would do a similar thing if I was using a stereo pair to mic something.
    You can always make a mono track stereo later as well using a variety of plug-ins.

  • Two mono tracks - one stereo

    How could I join two mono tracks (wav pcm) to one stereo without quality loss using ST Pro 2.0? If there is no good way to do this, could you recommend something, that can. Thanks

    Not sure what you mean by joining 2 files, but if you export as the same bitdepth and samplerate and leave the faders at 0 VU there shouldn't be any quality loss.

  • Changing mono tracks to stereo

    how does one change mono tracks into stereo tracks? I am using CS3. Can I do it in Premiere or Soundbooth?

    Frank McGough,
    In Soundbooth, Save As Wave format, and under the "Channels" dropdown select Stereo.
    -Matt Stegner

  • Can I use pan control in stereo track and balance control in mono track ?

    it seems that in logic I can only use pan control in mono track and balance control in stereo track .

    This is a flaw from the first days of Logic.
    There is a "helper" plug in called "direction ....." - I can't remember the full name. Anyway, it gives you more control over stereo tracks. You can narrow the width (left - right) and pan accordingly.
    Hope this helps.
    HL

  • Multiple Mono Tracks to Stereo

    I have a video clip that contains 4 mono tracks. All of which come out of the Left Channel. Can I change two of those tracks to come out of the Right Channel to simulate stereo? I tried going down to only two mono tracks and going to Modify > Stereo Pair, but it still comes out of the the left speaker.
    Thoughts? I am a FCP novice, so please assume you are writing to an idiot. That idiot being me.
    -Kirk

    W. Kirk Lutz wrote:
    I have a video clip that contains 4 mono tracks. All of which come out of the Left Channel. Can I change two of those tracks to come out of the Right Channel to simulate stereo?
    Select the two mono channels you want to come out of the Right channel in the Timeline then press Control-/ (the Control and / keys together). That is what FCP calls Pan Right (sending the audio to the Right channel).
    I realize you've copied your tracks, though I'm not clear if the copies are coming out of the correct channels, so I figured I'd share the 'textbook' solution (which can be applied to those channels, too).

  • How do i export 16 mono tracks in a sequence as 8 stereo tracks.

    Hi I'll be working with 16 tracks of mono audio in Premiere to enable flexibility with my audio edits but when i export i want to make those 16 tracks as 8 stereo tracks, as this is what our specs for TX are.  So 1&2 will be stereo track 1, 3&4 will be stereo track 2, 5&6 will be stereo track 3 and so forth... In FCP this is easy as you can link and unlink the audio in the sequence, and in the sequence settings audio outputs dictate whether it will be mono or stereo.
    From what i gather i can edit in mono sequence then copy and paste into stereo sequence, however as the audio tracks are 1 track whether it is stereo or mono how do 16 fit into 8 when pasting.
    Sorry in advance if i am missing something very easy here, but im pulling my hair out with this.
    Thanks in advance
    Jason

    PP wil naturally send a track to two channels, even with a multichannel Master.  So you can ruote the tracks in the Mixer window.

Maybe you are looking for

  • How Can I Create Something In This Style?

    HI guys, I am currently working on graphics for a mobile game I am making. I have some skill in vector, mostly through Inkscape, but I am trying to use Illustrator more. The thing is despite what program I use I can't figure out how to create somethi

  • How can i use iweb to work on both of my .mac accounts?

    I have 2 seprate .mac accounts, one is for my personal, other is more work based. How can I create on both with the same computer? I have created a different user on my mac, and then logged in on that name , which has worked, however I would like to

  • How to synchronize iPad with an existing iTunes Library

    Hye to all, I've got the following issue (strage to a new Apple user having Windows backgroud): after reinstallation my Win7 PC (only System Partition updated) the old iTunes Library (stored on my Data Partition) and automatically created by previous

  • Default namespace & interface in Sender Soap Adapter XI vs. PI 7.1

    In XI there is an option to set the default namespace and interface for sender SOAP adapters. Where or how is this to be handled in PI 7.1

  • App store download error *****...:@

    I keep downloading mac os x lion upgrade in app store and when the download reaches above 2GB it says "errorr has occured". I've got a low interet connection and so it takes 12 hours for me to download 2GB and each time I get this error and I've down