How to rerun P45 once the live run happend and XML files generated

Hi All,
I have run the P45s live run and upon clicking on the B2A manager button, it has taken me to the efiling screen but the efiling has ended up with connection error with the Government Gateway due to the expiry of certificate
We have now installed a new certificate and while trying to submit the P45s we have an issue.
I have reset the IT65 to original status by deleting the OT record that was created and the deletion of Leaver date.
It allows me to run the P45s but the B2A manager button does not appear.
How do i proceed with efiling. Please advise.
Many Thanks in advance
Veena

Hi Veena,
An earlier post by you regarding P45 is as below
Starter report P45(3) / P46 efiling for UK
from my understanding though i have not worked on GB Payroll you have said that you deleted IT 65 details of leaver,however there must be clusters generated in system from where the earlier data needs to be deleted and may be that is why you are facing the issue.
In Indian payroll when we execute text file for efiling of tax after challan mapping all the data compiles and sits in PCL cluster and therefore we are unable to generate form 16 with proper output,here we delete the clusters and rerun again the mappings and then check form 16.
Hope this might help you,Experts have suggested you earlier also,they may correct me for this.
Salil

Similar Messages

Using an own function in a select how can i set that the function run once?

Hi
Using an own function in a select how can i set that the function run once, not in every row?
Please help me
Thanks
Viktor

Something like this ?
SQL> select * from dept;
    DEPTNO DNAME                          LOC
        10 ACCOUNTING                     NEW YORK
        20 RESEARCH                       DALLAS
        30 SALES                          CHICAGO
        40 OPERATIONS                     BOSTON
SQL> create or replace function ret_name (deptnum in number) return varchar2
2 is
3     name    varchar2(50);
4 begin
5     select dname into name
6     from dept
7     where deptno=deptnum;
8     return name;
9 exception
10     when no_data_found then
11             return('Not existent deptno');
12* end;
SQL> /
Function created.
SQL> select deptno, decode(rownum,1,ret_name(deptno),null) dname from dept;
    DEPTNO DNAME
        10 ACCOUNTING
        20
        30
        40
SQL>

How to restart ipad once battery has run down

how to restart ipad once battery has run down

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

How to setup the default run page in WAR file

Can anyone please tell me how to setup the default run page in WAR file using JDeveloper? I want the login page to be the default page of the application. Thanks!

This is usually done in an .XML or other configuration file based on the particular web application container you are using.
For example, in Tomcat Java Container, its the following parameter in the /conf/web.xml file:
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
You will need to look at the documentation for your server container.
thanks

HT3576 how do I turn off the apps running in the background on my I phone 5 with the new ios 7

How do I turn off the apps running in the background with my Iphone 5 with the ISO7 ?

Double tap on the home button, slide the last used state(above the icon) up, tap Home button when finished.

How do I uninstall once the trial period has ended? The instructions say to de-activate the software, but the only option I am given is to enter a serial number. Thank you

How do I uninstall once the trial period has ended? The instructions say to de-activate the software, but the only option I am given is to enter a serial number (I can't get to a place where I can go to help and de-activate).. Thank you

Mobriennc which operating system are you using? Which Adobe software title are you currently evaluating?

If I have a new ipad should I use it until the battry runs out and then charge it... or first charge it for how much hours?

If I have a new ipad should I use it until the battry runs out and then charge it... or first charge it for how much hours?

saida123456 -
Here is some info on battery/charging for apple products.
~ They normally come 2/3 charged, so you would want to charge it right away if you want a 100% battery.
~ Keep it out of the sun because the sun will take away battery life.
- See link below for a lot of information on Apple products and batery life.
http://www.apple.com/batteries/ipad.html
I will look around for more information on this.

How do I find out the version of Oracle Time Zone files?

Hello there,
How do I find out the version of Oracle Time Zone files? I'm in the process of applying the recent oracle patch and need to find out the version of oracle time zone in my db. Could you please help me?

run
SELECT version FROM v$timezone_file;

Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?

Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?

No, because iPads do not run Mac OS X. They run iOS.

I purchased a iMAC off eBay. I was wondering how do I take off the previous owner name and replace mines?

Hi,
I purchased a iMAC off eBay. I was wondering how do I take off the previous owner name and replace mines? I reset all passwords to log in,but his name in the mac keeps showing up.
Thanks,
Honey
<Re-Titled By Host>

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

The user acct my apple was connected to no longer works (corrupt). My Apple TV is still synced to that account and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user?

The user profile my appleTV was synced on my computer to no longer works (corrupt). My Apple TV is still synced to that profile and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user (same computer)? I created a new user on my computer and moved the itunes folder to the desktop but never changed the path to which the apple synced to. Now I can only see old items I purchased before the user profile went bad. PLease help!

Welcome to the Apple Community.
Changing the library the Apple TV is synced with will delete all synced content from the Apple TV, but it won't delete purchased content.
You should be able to change the library, resync any content you want and transfer your purchases back to the new library.

Goods are sent back to the vendor once the Credit is taken and Utilized

Goods are sent back to the vendor once the Credit is taken and Utilized( Declared to Authorities)
Hi,
I have a scenario in which the inpur credit is taken at the time of the creation of the GR. The Credit is declared to the authorities on a monthly basis. The goods are to be returned to the Vendor once the Excise is declared to the authorities. In this case there is a problem that I can not Cancel the excise invoice as it has already been declared.
Can anyone please explain the process flow for this ?

Hi,
Dont Cancel the excise invoice , make excise payable entries through Tranzaction J1IS with refrence to Vendor return document.
Vipin

Try to do my first XML Schema in SQL Server 2012 Mangement Studio(SSMS2012)-How to execute the xsd and xml files in SSMS2012?

Hi all,
I learmed the basic stuff of XML, DTD, DOM, etc. long time ago. Now, I came back to resume my XML journey and try to learn the XML Schemas, XPath and XQuery. I have Microsoft SQL Server 2012 Management Studio (SSMS2012) in our computer network. From
Page 221 of the old Book "Beginning XML 2nd Edition" written by David Hunter, et.al., (published by Wrox), I copied the name5.xsd and name5.xml :
<?xml version="1.0"?>
<schema xmlns=http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.wrox.com/name" xmlns:target="http://www.wrox.com/name"
elementFormDefault="qualified">
<element name="name">
<complexType>
<sequence>
<element name="first" type="string"/>
<element name="middle" type="string"/>
<element name="last" type="string"/>
</sequence>
</complexType>
</element>
</schema>
<?xml version="1.0"?>
<name
xmlns=http://www.wrox.com/name"
xmlns:xsi="http://www.wrox.org/2001XMLSchema-instance"
xsi:schemaLocation="http://www.wrox.com/name name5.xsd"
title="Mr.">
<first>John</first>
<middle>Frizgerald</middle>
<last>Doe</last>
</name>
How can I execute these two files in my SSMS2012 for doing my first XML Schema trial?
Please kindly help, advise and respond.
Thanks in advance,
Scott Chang

Hi Eric Zhang, Thanks for your nice response.
1) I saw the CREATE XML SCHEMA COLLECTION (Transact-SQL) and tried its first example "Create XML schema collection in the database" in my SQL Server 2012 Management Studio (SSMS2012):
-- Create a sample database in which to load the XML schema collection.
-- Copied this set of code stsments from Microsoft Library (ms176009)
-- ColesMS12_20a.sql (saved in C:/Documents/SQL Server Management Studio)
-- 19 March 2015 1145 AM
CREATE DATABASE SampleDB
GO
USE SampleDB
GO
CREATE XML SCHEMA COLLECTION ManuInstructionsSchemaCollection AS
N'<?xml version="1.0" encoding="UTF-16"?>
<xsd:schema targetNamespace="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions"
xmlns ="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" >
<xsd:complexType name="StepType" mixed="true" >
<xsd:choice minOccurs="0" maxOccurs="unbounded" >
<xsd:element name="tool" type="xsd:string" />
<xsd:element name="material" type="xsd:string" />
<xsd:element name="blueprint" type="xsd:string" />
<xsd:element name="specs" type="xsd:string" />
<xsd:element name="diag" type="xsd:string" />
</xsd:choice>
</xsd:complexType>
<xsd:element name="root">
<xsd:complexType mixed="true">
<xsd:sequence>
<xsd:element name="Location" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType mixed="true">
<xsd:sequence>
<xsd:element name="step" type="StepType" minOccurs="1" maxOccurs="unbounded" />
</xsd:sequence>
<xsd:attribute name="LocationID" type="xsd:integer" use="required"/>
<xsd:attribute name="SetupHours" type="xsd:decimal" use="optional"/>
<xsd:attribute name="MachineHours" type="xsd:decimal" use="optional"/>
<xsd:attribute name="LaborHours" type="xsd:decimal" use="optional"/>
<xsd:attribute name="LotSize" type="xsd:decimal" use="optional"/>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>' ;
GO
-- Verify - list of collections in the database.
select *
from sys.xml_schema_collections
-- Verify - list of namespaces in the database.
select name
from sys.xml_schema_namespaces
-- Use it. Create a typed xml variable. Note collection name specified.
DECLARE @x xml (ManuInstructionsSchemaCollection)
GO
--Or create a typed xml column.
CREATE TABLE T (
i int primary key,
x xml (ManuInstructionsSchemaCollection))
GO
-- ////The following code statements are not used in order to create SampleDB
-- Clean up
---DROP TABLE T
---GO
---DROP XML SCHEMA COLLECTION ManuInstructionsSchemaCollection
---Go
---USE Master
---GO
---DROP DATABASE SampleDB
It worked and I got the following results:
1 4 NULL sys 2009-04-13 12:59:13.390 2012-02-10 20:16:02.097
65536 1 NULL ManuInstructionsSchemaCollection 2015-03-19 11:47:17.660 2015-03-19 11:47:17.660
http://www.w3.org/2001/XMLSchema
http://schemas.microsoft.com/sqlserver/2004/sqltypes
http://www.w3.org/XML/1998/namespace
http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions
But, I don't undertand (i) what SCHEMA COECTION is, (ii) what <xsd:schema targetNamespace=.....</xsd:complexType> are, (iii) How I can specify my "project specific" schema in the Microsoft SCHEMA COLLECTION to check my xml file.
2) I dived in the XQuery programmimng in SSMS2012 in the last few weeks. I used the examles of Ad-Hoc XML File Query by Seth Delconte (in
httpS://www.simple-talk.com/content/print.aspx?article=1756) in my SSMS2012. They worked. But I don't understand the (i) Importing XML data using a function, (ii) Using the XQuery contans()
function to find substrings, (iii)Efficiency comparisons in the article.
Please kindly help me in enlightening me to resolve the difficulties listed in 1) and 2).
Thanks,
Scott Chang

I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?

I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?
Lance

download the installation file(s) and activate with your serial number,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.<

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

How to rerun P45 once the live run happend and XML files generated

Similar Messages

Maybe you are looking for