How to reserve stocks for customers belonging to one sales office ?

For example, we have 100c/s of a material and we want to reserve 60c/s for customers in one sales office only? the remaining 40c/s can be billed to anyone else. There are no firm orders of these 60c/s as of now from the select group of customers in particular sales office.
Thanks in adv.

Hi,
There are several options depending on your scenario:
If you have ATP activated you can already enter the sales order with a date in the future and the ATP check will block this quantity. If you know the total available quantity of your material you could also use product allocations.
If you are not using ATP you could move some stock to a specific storage location which is not available for SD deliveries.
You can do this by using consignment fillup senario. That means u just create consignment fillup order for that particular customer then do the deliery but no invoice. As soon as the customer consumed the stock then u can issue the bill.
Thanks
Murtuza

Similar Messages

  • How to reserve stock for particular customer?

    HI all,
    How to reserve stock for particular customer when they has approved a particular batch?
    Please tell me all the possibles.
    Thank you.
    Richard

    >
    Richard.Wang wrote:
    > HI all,
    >
    > How to reserve stock for particular customer when they has approved a particular batch?
    > Please tell me all the possibles.
    > Thank you.
    >
    > Richard
    Seems like you are talking of reserving material for sales order. In this case, when the ATP check is run, the stock is automatically reserved for the sales order.
    Reservation can also take place through MB21, where material is reserved for certain purpose.
    If work order is created, it automatically created reservation for the required material.

  • Reserve stock for a cost center & don't allow issue to another cost centre?

    Dear Experts,
    How to reserve stock for a cost center & don't allow issue to another cost centre?
    Stock is reserved by creating reservation by MB21 for one cost centre e.g.CC1.
    We want to restrict this stock for the same cost center CC1 only.
    But when tried to issue stock to another cost center CC2, system allowed to post goods issue document.
    System should not allow for goods issue of this stock to another cost center other than CC1.
    How to make it.......please suggest.

    I have checked
    SPRO MM -- Inventory Management and Physical Inventory -- Reservation -- Maintain Copy Rules for Reference Documents
    This is for reference document data copying.
    Do you mean to say SPRO MM -- Inventory Management and Physical Inventory -- Reservation -- Set Dynamic Availability Check
    Here for mvmt type 201 - valuation update - qty update - no special stock - Goods mvmt w/o reference - A (Dynamic Avl. chk) is the setting.
    But system is not issuing the any message while issuing reserved stock to another cost center.
    Please suggest...

  • How can I reserve stock for a specific sales order?

    We would like to reserve stock for a specific sales order X which must be delivered next month. I have created a reservation (trx. MB21) for sales order X (movement type 231). MD04 list shows the reservation and decreases ATP stock. Stock is blocked for allocation to other sales orders. So far, it works as required. But: I cannot deliver sales order X either! It is possible to post GI for the reservation but there is no link to sales order X. It is still not possible to deliver sales order X. I thought entering the sales order number in the reservation would link the reservation to the sales order but appearently it is not.
    Does anyone know if it is possible to use reservations for reserving stock for sales orders? If yes, how does it work?
    If not, is there a way to reserve stock for future issue of a specific sales order or for a specific customer?
    Regards,
    Mariët
    PS We confirm all sales orders. Stock allocation / ATP-check only takes place at delivery creation.
    Edited by: Mariet on Jul 11, 2008 2:35 PM

    Hi Csaba,
    Thanks for your reply. We are not going to work in MTO environment because we do not make/purchase to order... I will explain our process/requirement in detail:
    Normaly a customer orders our products and we deliver from stock. Sometimes a customer calls and informs us that he needs an extraordinary large amount of the product next month. Customer tells us that it is very important that the full quantity is available that date. For us it is no problem to purchase that amount of products in time but we must avoid other customers to take away the stock. Since we confirm all sales orders and do not allocate stock to sales orders, I am looking for a solution to 'reserve' that amount of stock for that specific customer to be available at that specific date (next month).
    I tried to use reservations but then I need a sales order number, so that's why I created a sales order with delivery date next month. I created a reservation (movement type 231, sales order number X + sales order item number). Unfortunately the stock can still be assigned to other customers/sales orders... (I was expecting that only sales order X could use this reserved stock...).
    Do you know if reservations can be used for this purpose? I do not need a sales order (I only created it because I need to enter a sales order + item in the reservation), if there is a way to reserve quantity for a specific customer this would be a good solution for us as well.
    Thanks in advance for your advise.
    Regards,
    Mariet

  • Reserve stock for sales order

    Hello SAP Guru,
    in my case i am using MTS scenario. Now i want to reserve stock for the Specific Sales order. I have done the reservation by 231 mvmt type now material is showing under reservation. but while doing delivery for the same SO system not picking the stock from the reservation only picking from unrestricted stock now tell me how to do the delivery from the reservation stock?
    With regards,
    dev123.

    Hi Lakshmipathi,
    As per your suggestion, I tested and found it working properly. But now if i want to divert the stock to other sales order even after i have created and saved delivery,
    in OVZ9,
    will I need to only deactivate Include Deliveries check box in inward / outward movements ????? or something more I will have to do?
    And,
    What is the use of reservation then that we create in MB21 against 231 movement type which is GI for Sales  Order. Cant I use that ??
    Kindly advice on this
    regards,
    Sagar

  • How to reserve material for Internal order

    Hi,
    How to reserve material for Internal order?
    Please reply ASAP.
    Thanks & Regards,
    Pankaj

    Hi Eli,
    Thanks for the reply.
    I was asking for the integraing of automatic creation of reservation of material.
    please revert back if i need to give more details.
    Regards,
    Pankaj

  • WRT54GL V 1.1 : how to reserve IP for specific MAC address using DHCP

    My !free! made in China router have this functionality. And yet I have been banging my head with this new reasonably expensive wireless router from Linksys. Anyway I lug my notebook around. I need my home router to be able to automatically configure notebook IP address using DHCP. At the same time I need the ip given by home router through DHCP to be the same IP all the time. So "static" ip is not the solution. Alternative "static" ip is also not a solution. Anything with the word "static" in it is not a solution. I know about third party firmware (wrt or tomato) and I know WRT54GL can be flashed with this third party firware. But I'm not going to void my warranty. This will be my last option but not the solution that I seek. I would like to know how to reserve ip for specific mac address using DHCP for WRT54GL V1.1. If this version have no way to make such configuration, I would like to know if there is official firmware upgrade that address this. Thanks in advance!

    LDK-Anc wrote:
    Tonik - For the life of me, I cannot find DHCP Reservation on the WRT300N. I'm currently configuring one and it would be really useful if I could fine it. Maybe LinkSys calls it something else, but I don't really see anything resembling it. Help!
    Maybe these could help. (Images extracted from the User Guide)
    Setup tab: Basic Setup
    DHCP Reservation
    Message Edited by denman_v2 on 03-25-2008 05:11 PM

  • How to maintain a customer for one sales office

    Dear All,
    One customer was assigned to more than 1 sales office. Due to this collection report which customized based on sales office was showing wrong data. We need to maintain only one sales office for one customer.
    If we change in master data all transactions done previously may change.So they ask to change in reference table and check the report.
    Tell me where can we find the reference table. How to maintain like above.
    Regards,
    Ganesh

    So they ask to change in reference table
    What do you mean by this ??  If you want to check what are all the changes made to a customer master, then check in XD04.
    thanks
    G. Lakshmipathi

  • Is there any heirarchy for retreiving theorg unit or sales office data for

    Hello,
    If there is only one crm user which is assigned to different sales offices,then while monitering any activity from which sales office or org unit does the data is displayed.
    Is there any heirarchy for retreiving theorg unit or sales office data for an employee?
    regards,
    divya

    IF NOT it_vbrk[] IS INITIAL.
      Fetching Material no, sub-family, tint and coating codes
        SELECT vbeln posnr fkimg vrkme prsdt netwr matnr arktx mwsbp subfam
               codcol codcoat epaiscom codtyp length width
               INTO CORRESPONDING FIELDS OF TABLE it_vbrp
                           FROM vbrp
                               FOR ALL ENTRIES IN it_vbrk
                               WHERE vbeln   = it_vbrk-vbeln AND
                                     subfam  IN s_subfam AND
                                     codcol  IN s_codcol AND
                                     codcoat IN s_coat AND
                                     epaiscom IN s_thick.
    endif.

  • How to load stocks for the months prior to initialization ?

    Hello,
    We load a cube stock from 3 ODS for BF,BX and UM extractors.
    We are in a monthly snapshot scenario(we have read the specific how to but we must use 3 ODS one for each datasource because of data integrity (strong customer architecture contrainst).
    For opening stock and the future month the solution is ok.
    How to load the data for the 12 month prior the loading of opening stock ?
    Specific datasources, full loading ?
    Thanks to share our experiences
    Best regards
    Christophe

    your previous months closing stock becomes opening stock for current month. Try the infostructure S039,this holds the closing stock of each month. You can populate this infostructure with program rmbs039. create a generic data source on this and populate opening and closing stock for each month.

  • How to make Different Price for same product in one Sale Order

    How can i customizing my system?
    I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
    Someone have any suggestions?

    Hi
    you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
    The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
    - you'll need to create a new ítem category copied from the one you´re using and do all assignments
    - add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
    http://scn.sap.com/thread/1693234
    - Adjust your pricing sequence as per new table
    - Maintain specific prices in new table for materials with this new ítem category
    Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
    Regards,
    JM

  • Reserve stock for one customer

    Hi SAP Gurus,
    Please advise that how can I reserve some portion of stock of one material for a particular customer ?
    Thanks for your help.
    Regards,
    Manoj

    Hi,
    there are several options depending on your scenario:
    If you have ATP activated you can already enter the sales order with a date in the future and the ATP check will block this quantity. If you know the total available quantity of your material you could also use product allocations.
    If you are not using ATP you could move some stock to a specific storage location which is not available for SD deliveries.
    Regards,
    Markus

  • How to configurate system for two database under one server

    Hi Friends,
    I installed abd created A database by oracle 10GR4 in window 32 bit 2003.
    it works.
    Then i created other B database by DBCA under this server.
    When I shutdown immediate database.
    it works well. But I can not startup mount ot startup A database again,
    I got below message as
    SQL> startup mount;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> startup;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> startup;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    From EM, I saw as
    A listen Status Up
    LISTENER
    Oracle Home          
    C:\oracle\product\10.2.0\db_1\BIN
    Location          
    C:\oracle\product\10.2.0\db_1\BIN\network\admin
    BUT agent connect Status          
    Failed
    Details          ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
    A database instance down
    Host     salerpt.net
    Port 1521
    SID SALERPT
    Oracle Home C:\oracle\product\10.2.0\db_1\BIN
    Also I try to connect as
    SQL> connect sys/salel@salerpt as sysdba;
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Form EM, I saw listen start up.
    Then I stop it. then restart it
    I can saw B db listen and can not see A db listen.
    also
    I saw that other B database works.
    My listen info as***************
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1\BIN)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = SALERPT.NET)(PORT = 1521))
    I check physical, two database use one common bin directory .
    I do not have any experience to handle two database under one oracle server.
    How to check and configurate DB server system?
    Thanks for help.
    Edited by: user589812 on Jan 4, 2009 8:17 AM

    Jim,
    Before starting the database A, did you set ORACLE_SID=A from command line? You can run as many instances you want from single server provided you enough memory, processing power. Also try starting your instances usign window services and check and post some lines from alert.log for database A.
    tnsnames.ora entry
    DATABASE_A =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DATABASE_A)
    DATABASE_B =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DATABASE_B)
      )Regards
    Edited by: OrionNet on Jan 5, 2009 10:55 AM

  • How to execute KISR for multiple cycles in one step?

    CO Experts,
    I have a business reqirement to reverse the previous month assessments into the next period. I am planning to use KISR, but I could not find any way to execute KISR for multiple cycles, similar to the RKGALKSU5
    program ? Is there any program available to makes possible the above ?
    Thanks and Regards
    Peter

    Hi Samir,
    Please feel free to take a look at Liaison Messenger EDD, www.liaisonsc.com
    Messenger EDD automates business form and report distribution and uses your existing SAP reports. The end user selects either a batch or a single document through your normal print process in SAP but now uses our Messenger EDD print driver and Messenger will then distribute the documents selected based on rules you set up at initial configuration.
    For example, through the single print selection:
    - Distribute Invoices to the customers preference (print, fax, or email) if email, it attaches a PDF of the document
    - Archive a copy to desired folder
    - Print a hard copy to attach to other paperwork
    - Attach a static or variable attachment like terms and conditions, marketing PDF, or supporting variable documents.
           * PDF creation is included with the product.
    Set up similar rules for Sales Orders, PO's, Statements or even shipping documents like Packing Slips, Picking Tickets, Bills of Lading and
    International docs, etc.
    Please reach me at [email protected] or 714.543.9877x201 if you have any questions or would like to view an on-line demonstration.
    Best Regards,
    Tom Nielsen
    Liaison Software

  • How to copy data for certain member from one dimension to another dimension

    Dear ,
    I want to copy data for certain member ("511102") from one dimension to another combinations of dimensions ,
    I have the following combinations for "511102" :
    _("Budget2012","FY12","Working.V01","SAR","BegBalance","1011","G_10","custom Grades")_
    I want to copy "511102"  to "salary"
    -salary have the following dimensions :
    _("Budget2012","FY12","Working.V01","SAR","BegBalance","General group","All grades","General Employees")_
    , I don't know if I could do it by datacopy of cross dimensional , But I don't HOW >>>
    Thanks in advance

    FIX("Budget2012","FY12","Working.V01","SAR","BegBalance","General group","All grades","General Employees")
    "salary"="511102"->"1011"->"G_10"->"custom Grades";
    ENDFIX
    or
    FIX("Budget2012","FY12","Working.V01","SAR","BegBalance")
    DATACOPY "511102"->"1011"->"G_10"->"custom Grades" to "salary"->"General group"->"All grades"->"General Employees";
    ENDFIX
    Key thing in datacopy is to place the dimensions in cross dimension in the same order. Both sides (before and after "TO") should have equal number of dimension members specified.
    Cheers,
    Alp

Maybe you are looking for