How to reset audio device count in Windows 7?

Hello,
I'm working w/ a fairly abused Windows 7 install that's seen a few chipsets, cpus, and gpus. I've also apparently installed the driver 2 times.
Changing from mode to mode in the X-Fi (entertainment to game, etc) takes FOREVER. It gets worse w/ every install and I'm wondering if there's a way to reset this number, clear the driver cache, anything.
Anybody?
http://img.photobucket.com/albums/v2...evicecount.jpg

Look carefully at the product that you are trying to update (the "About" selection under Help) and indicate the product and version you are using. Be sure you are talking about Acrobat and not Reader. The update link should work, but you indicate it does not. You would then go to the appropriate product update page and download ALL of the updates after your minor version. Then install them in order from the oldest to newest. If this does not work, then head back and do either a repair or reinstall of your original product (you typically do not need to uninstall first). Then try the updates.

Similar Messages

My daughter put in a restriction code on her ipod touch and I need to know how to reset her device as a new one and I also do not have her itunes account information?

My daughter put a restriction code on her ipod touch and i also cannot get onto her itunes account. I need to know how to reset her device as a new device?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.

How to install Cisco Device Manger on Window 7

Hello
Is Cisco device manager supported on windows 7 ?
If yes how to install Cisco Device Manger on Window 7?
Please advise
Thanks
Chetan R

You can install the latest DCNM 5.x for support, please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
Support for Windows 7 and Windows 2008
In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
For DCNM-SAN installation please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
I hope this helps.
Carlos

How to remove the IT policy from my Torch 9800, or how to reset the device to original setting

I have a Torch 9800 formerly- used for business emails. According to our company policy there was an IT policy installed to the device hence would force the user to set password protecting the device.
Now this device has been retired and I like to use it only for regular phone calls thus do not like to have a password protection. My question is:
How to remove the IT policy from the device?
or
How to reset the device to original setting?
I have been trying to swipe and scrub the device several times but that IT policy still exist. Need help......
Solved!
Go to Solution.

See the RIM Knowledge Base article here for information on how to remove an IT Policy. See the Method Three in the link:
KB14202 How to remove an IT policy from a BlackBerry smartphone
Read this RIM Knowledge Base article to reset your device to the factory settings.
KB18998 How to reset a BlackBerry smartphone to factory defaults
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS1559 how to reset bluetooth device ipod touch

how to reset bluetooth device ipod touch

- On the iPod go to Settings>General>Reset>Reset Network Settings. You will also have to rejoin wifi networks.
- To reset the BT device itself you will have to look at the manual since it varies.

How to enumerate audio devices in Windows 7?

Hi!
My Labview application works now in WinXP environment.
It uses audio device enumeration to select the appropriate device on PC.
To do it I use now Automation call to DirectX interface.
This function generates error on PC under Windows7 with message: "unregistered class....".
Of course Win7 doesn't have DX8,
What an alternative does exists in Win7 and what I have to change in my Labview function?
Thanks in advance for an idea.
Anatoly
Solved!
Go to Solution.
Attachments:
Untitled_1d.png ‏3 KB

Use .net constructor.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Elitebook 2540p Motherboard changed. Integrated motherboard IDT audio device missing in windows 7.

Hi,
Old situation:
(I recently changed motherboard for my computer Elitebook 2540p. When i installed windows 7 to my computer the computer doesn't list any audio devices in device manager page. I've checked bios for any faulty settings and they are all set right. Theres no yellow marks in device list either and all drivers seems to be installed.)
New situation:
Installed windows 7 again and computer found / installed audio devices normally. I tested computer for hours to play audio from it and everything worked fine. I restarted computer several times / re installed battery to the computer. On one restart the computers audio quick mute button below the screen appeared to be orange and the sound speaker icon in windows was marked as X. I check device list again from device manager and there was no audio devices listed (No sound devices at all). After that i restarted computer and before the computer started downloadin windows i pressed the mute button and it turned blue. I then went to windows and sound devices / sound was working again.
Old situation:
I have motherboard integrated IDT audio device.
When i try to install audio drivers from hp site for 2540p i get "Your system does not meet the minimum requirements for this update." And the device manager doesnt list any IDT audio devices.
I then installed xp and the computer found IDT audio device normally and the sounds are working correct.
New situation:
After i did new windows 7 install and all my audio drivers installed / devices showed in device list / audio worked i downloaded audio drivers from HP driver site and installed them to the computer.
Audio problems has not been occured again after my HP screen mute button turned to orange / Windows sound speaker was marked as X / Computer didn´t find any audio devices.
Currently waiting if the problem occurs again and trying to think what would cause this ( Hardware problem or software)? And how to fix it permanently.
Any help for this problem?
BIOS is updated to newest version from HP driver download center.
All windows drivers are installed.
Motherboard info: Product Number VB841AV
Product Model BU RCTO i7-640LM fMdm 2540p
598762-001 MB SYS W/PROC CORE2 DUO 2.13 GHZ

Hi Jarppi,
Welcome to the HP Support Forums! To get your issue more exposure I would suggest posting in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to Reset Application Badge Count AS3

Hi,
I have successfully sent an apple push notification using a native extension for adobe air by anders-tbl. The notification simply sets the badge count to 1 and has a little message.
What confuses me is how do I reset this badge count once a user reopens my application or opens the application by clicking on the notification? The badge count always stays at 1 even if I delete the application and reinstall it, it’s still there!!??
I know I can reset the badge count by sending a notification with badge = 0, but I can't dynamically do this by sending an empty APN with badge set to 0 as you only get the device token on first application load? Surely you set this via some kind of AS3 function? I can’t seem to find any help searching google at all.
If anyone knows or can nudge me in the right direction on how you are suposed to do this that would be great.
Cheers,

You can learn more about the next AIR mobile and desktop features by applying for our private prerelease program. By doing so, you'll get to know the features of the upcoming release in advance!

No audio device installed after windows vista sp2 update

Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
So A few days ago There was an update for my audio driver so I accepted.
But after this update my sound worked but on next use the sound was gone.
So......I used system restore but no help the same thing happened
I went to the hp website to look up my audio driver for my model which was conexant audio 221
After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
So i tried it and still the same crap
I cant install the sound driver because there is no place in the device manager to install it to
I just get a message saying device installation failed device not found
i dont know what to do
My laptop is a hp dv2700 special edition notebook
Ive had it for a year no problems and this is the first major problem I've had ..............HELP
Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager, i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol... ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
Message Edited by WendyM on 08-09-2009 07:35 PM

How to get the device token in windows phone 8 sliverlight application?

Hi,
I am developing a windows phone 8 silverlight application . For my application I want to add push notification service , for this service I have to call one web service in my app . This api requires device token , device id ..etc , I am able to get the all
the things except devicetoken .
How to get the device token of a device ?
any help?
Thanks...
Suresh.M

Most probably device token is the push channel url which is returned by MPNS when a request is made to it.
Step 3 here: Push notifications for Windows Phone 8
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

"No Audio Device Installed" in Windows Vista.

Back in september 2011 I mysteriously lost my audio. I have a red X over my speaker icon in my system tray. When I put the cursor over the speaker icon I get this message "No Audio Device Installed". I went to the HP Customer web page and found the audio driver: Realtek High Definition Audio Version 6.0.1.5548 (sp37324.exe). I downloaded the program and saved it to my download folder. I put a short cut to it on my desktop. The only way I can get sound is whenever I turn on my computer I right click the desktop short cut and run as Administrator and install the program. My sound comes on. It works as long as I keep the computer on. Whenever I restart the computer I'm back to the red X over the speaker icon.
Now, Windows Update has sent me (on 3 occassions the last couple of weeks) an "optional update"...the Realtek High Definition Audio. Each time I download it and install it and do a restart,but I get the same red X over the speaker icon. It's Ground Hog Day!
My question: Is it safe to uninstall the Realtek High Definition Audio driver and reinstall the sp37324.exe without totally sending my audio into a Black Hole? BTW,I don't have a recovery disk.
I hope someone on this forum can help me. I've exhausted all avenues.
This question was solved.
View Solution.

Hi,
My suggetion: Totally uninstall it, reboot the machine and install it again. You can uninstall it from
   Control panel > Device Manager
   It should be under Sound ...
   Right click it & Uninstall
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to reset new page counter

Does anybody knows how to reset page counter (next free page number suggested on page creation)?

If your web host doesn't provide you with meaningful stats, sign-up for Google Analytics. Google will give you more valuable stats about your site visitors than a hit counter will. And it's free.
http://www.google.com/analytics/
Simply paste the GA code they give you into your web pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to reset the Terminal Count indicator on the PXI-6608

Dear Community,
Is there any way to reset the terminal count indicator on the PXI-6608? When I Use Get Attribute.vi I get the correct value the first time, but unfortunately (unlike DAQmx) reading the value doesn't reset it...
I'd like to keep track of how many times it has rolled over. And I don't want to use another counter to do that because I'd like to keep them free for other things.
Thanks!
Cas
Solved!
Go to Solution.

Traditional daq does not have a means to reset the terminal count indicator, as far as I know. One thing you might be able to do is change the "output mode" to "toggle" and then read the "output state" to determine rollovers by determining when the output state has changed during your application.
I hope this helps!
gus....

How to add audio devices under sound in system preferences

How do I add output audio devices under system preferences --only option listed is internal speakers?
Macbook help says to change device under sound in system preferences. However, only option listed it the internal
speaker.
I need to sound to come from my tv which is hooked via vga cable and audio cable.
Every thing works but I cannot get sound from tv.

You are my hero. I'm not very savy when it comes to connections. I had the audio cable hooked up to the audio port which is next to the headphone port on my macbook. After switching the tv was listed just as you said it would. Thanks so much. I'm now a very happy camper.

How to change audio device?

Hi!
My computer is HP Compaq 7900p small. I bought new graphics card which is Asus AMD HD6450. When I test it I saw problem - no sound.
When I click on Sounds tab, I see that AMD HDMI Output-AMD High Definition Audio Device - not plugged in and I couldn't change it to default device. When I troubleshooted it, problem was that one or more audio devices isn't running.
I was searched in google for solution, and found it that I need to change in BIOS from DVI port to HDMI port, but in my comp BIOS version is 7.11 and I don't see where it would be changed.
Only what I did was that I swapped integrated audio to enabled then I get sound from my speakers, but AMD High Definiton Audio Device still isn't plugged in. Please help me change it to default!
Pleeease answer! in other subjects I wait for months! ;( Thanks for your advice!
Filips
This question was solved.
View Solution.

Hello Filips,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP Compaq dc7900 Small Form Factor PC is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
The support page for your product may be helpful in the meantime:
HP Compaq dc7900 Small Form Factor PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

How to reset audio device count in Windows 7?

Similar Messages

Maybe you are looking for