How to reset cisco switch srw224g4p

I was trying to add some vlans to the switch. After adding , when I updated the settings, the web admin wont open no more. The address 192.168.1.254 was no longer accessible.
Is there any way that I can reset the switch and bring it back to factory settings?

To rese the SRW switches you have to go through the console cable on the back of the switch. Then you can pull up your hyper termial and start a new connection. Make sure to set the seial port settings to : Bits per second-38400 data bits 8 parity none stop bits noe flow control none. Then hit enter twice. It will ask for your username and password. Once you get in go under 1.system configuration menu, 6. restore system to default settings. 7. reboot system. Once the system comes back up the switch will be back as if you had just pulled it out of the box. and back at the 192.168.1.254

Similar Messages

How to capture CISCO Switches / Routers CPU Utilization in MRTG

Hi,
I’m using CISCO Switches / Routers and wanted to capture the CPU Utilization of those devices in MRTG. Can anyone help me to get step by step information. Please.!

Thanks Vinod..!
I already have MRTG installed and monitoring link bandwidth utilization. Now, Wanted to capture the CPU utilization for those devices. Can i know the configuration detail needs to be applied in MRTG / Routers or Switches.
Provided URL don't have much detailed configuration needs to be done at both the side (MRTG / CISCO Devices). Please.
Thanks,
Tamil

How to reset cisco EX90

i have cisco EX90 and i am unable to reset it to factory defaults, i have followed the steps like pressing the power button for 10 secs and then pressing it twice. i have forgot the password that is why i want to reset

Hello,
Do you see https://supportforums.cisco.com/video/11930956/factory-reset-ex60ex90-tc51-onwards ?
br Oleksandr

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to search/Scan Vlan of cisco switch ports

Can any one tell me how i can scan/search vlans of cisco switch port through any monitoring tool (orion/solarwinds).
Consider this scenario as i have no access to switch and i want to know below things:
1-Vlans created on switch?
2-which switch port belongs to which vlan id?
Thanks

Hi,
You can do it only with hub in between and also please note that when sniffing with Wireshark on Windows the OS would remove VLAN tag so you may need to use Linux machine.
Regards,
Aleksandra

How to get info over snmp on cisco switch whether native vlan on a port is tagged or not?

Hi!
I want to know which oid(s) should I query to know whether native vlan on trunk port on cisco switch is tagged or not?
I am querying the oid .1.3.6.1.4.1.9.9.46.1.6.3.0 (vlanTrunkPortsDot1qTag) on cisco 3560 (E Series) and I am getting global value. Also, this OID is showing as deprecated. So I query .1.3.6.1.4.1.9.9.246.1.6 (cltcDot1qAllTagged) and its subtree, but no value is returned.
Switch Version is
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(50)SE2

Keep in mind that DHCP is a broadcast packet to start. So the AP can only listen in the subnet that it has an IP address for.
Now, for any other subnet you can use the AP for DHCP but you have to have an IP helper address on your L3 pointing back to the AP.
That being said, I wouldn't use the DHCP server on the AP as it is limited. You'd be better off using a Microsoft server or some other device that is designed for DHCP.
HTH,
Steve

Configure Domain Controller ( PDC emulator) as NTP source for Cisco switch 6509

Hi All,
My Org consists of 2 DC one Physical and One Virtual. All Roles are on Physical machine. I ran a W32tm /Query /Configuration command on PDC emulator and the results are confusing.My PDC is using time source VMICTimeProvider a syou can see below.
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
My first Question is that Is it Ok for PDC emulator to use this time source or should I change to some Other source like pool.ntp.org or time.windows.com,0x1.
My Second Question is that I have a core switch cisco 6509 and I want this switch to use my NTP server (PDC emulator ) as NTP source,but at present I cannot as I am getting this error on switch.(no select intersectionTP )
Can Any one help ... Its is urgent
Thanks in Advance
EagleAsh

You should not make your DCs sync their time with your Hypervisor. This usually ends with time synchronization problem so I would recommend to disable that on your DCs and domain joined VMs and use an external NTP server to sync time on your PDC while using
your AD forest topology for time sync on other DCs and domain-joined computers.
I have already started a Wiki article that describes how to configure time sync in an AD domain and you might consider using the GPO configuration option that is stated: http://social.technet.microsoft.com/wiki/contents/articles/18573.time-synchronization-in-active-directory-forests.aspx
For the CISCO switch, I would recommend asking them in CISCO forums.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Cisco switches make me crazy

mohamedhalim2 wrote:
i wana an answer to this case pleaseWe aren't Cisco TAC, we are volunteers.mohamedhalim2 wrote:
how can i defaulting this switch , the switsh is switch catalyst 2960 48 portuse the clear config command.
Resetting Catalyst Switches to Factory Defaults - Cisco

i wana an answer to this case please
Yesterday I wanted to erase an cisco switch and delete all the configration file
make it to default , i did evry command line that i know but finaly the switch was make arestat and stoped at this word
switch :
switch :
switch :
switch :
I want to find a solution to this problem please
how can i defaulting this switch , the switsh is switch catalyst 2960 48 port
This topic first appeared in the Spiceworks Community

How to Reset HP LaserJet 1500L Drum and Toner

(Note: This also applies to some other laser printers too. If so then please update this thread to indicate the model and any extra instructions.)
The legacy 1500 and 1500L use dumb toner and drum cartages. They have a chip which simply counts the number of pages printed, and when a preset number (as per cartridge size) have been printed, it sends a signal to the printer to replace it. This is ok if you print the average amount of ink per page, but if you print a lot of photos, the cartage will be exhausted before the indicator flashes, and if like the rest of us you print the usual selection of documents etc, then probably about 50 to 25 percent of the toner remains - what a waste!.
Fortunately, (or not) HP kindly provide incorrect instructions how to reset the counter. It's a pity that customer support don’t read their own documentation, or put it in the manual.
Do exactly the following:
1) Turn the printer power switch off.
    Wait 10 seconds for any residual charges to clear.
2) While powered off, press and hold the GO button (right hand)
3) Turn the printer power switch on while continuing to hold the GO button down.
4) After the Go, Ready, and Attention LEDs turn on, continue holding the GO button
    for at least 20 seconds (maybe 30 seconds). During this time, the Attention,
    Ready, and Go LEDs will each eventually turn off.
5) When it seems to have stopped, now release the GO button.
6) The printers LEDs will begin cycling from front to back. After about 15-30 seconds it finishes
    and everything goes quiet. The printer should now be in the 'ready' state.
7) (The missing instruction) Press the cancel (orange) button.
Send a simple colour document to the printer and it should print out ok, proving it is all ok.
Keep printing until one of the cartages or the fixer toner drum are depleted and printing result is unacceptable.

Hailun, welcome to the forum.
Here is a guide to help you solve your problem. Read it carefully and follow the instructions step by step.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to reset composite statitics from Enterprise Manager

Hi,
Someone knows how to reset statitics from a composite with their components, services and references from EM 11g without redeploy the composite?
Thank You in advance.
JP

John,
Yes your assumption is correct. Also, I have uninstalled (and removed user data) and re-installed DM. Also rebooted PC but still no luck. Eveytime I connect my new device to DM it pops up a msg: "Your messaging account is currently configured to use <old device>. Would you like to switch to <new device> instead?". I then proceed to click on "Yes", it still shows Active Device as the old one and Device Connected as new one.

Rrack mounting brackets for Cisco switch SF300-48P ?

Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

You might be able to get them through Cisco support. Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

How to reset my e51?

hi would b helpful if you could let me know how to reset my e51. its troubling me a lot now a days, it just freezes up automatically so thought if i could possibly reset it on my own somehow!!!..... thanks in advance
Moderator's note:
Title edited.
Message Edited by gcpropulser on 29-Dec-2008 11:07 AM
Solved!
Go to Solution.

hi thanks for that, but the problem is that after switching it on it freezes in seconds so by the time i try n apply those codes its hanged already so it is not taking any of those reset command. please let me know on any alternate solution also (mayb sumthing tht can b workable in poweroff mode or like tht). would appreciate your help.
also now the phone restarts automatically after i insert the battery (i hav to take out the battery to switch it off as it is not responding to normal switch off from the power key)
Message Edited by tarun_k on 29-Dec-2008 10:54 AM

How to reset a particular view object alone to it's initial state??

Hi,
My application contains view objects with custom data source implementation. One of my requirement is to reset the particular view object alone to it's initial state. I can't use rollback since it is at Db Transaction level. I searched in forums and finally written the following coding to achieve it. It works fine during sometime but sometimes i am getting the exception oracle.jbo.DeadEntityAccessException: JBO-27101: Attempt to access dead entity in Person, key=oracle.jbo.Key[1 -10 ]
    public void resetPersonViewObject(String voName) {
        Iterator dirtyItr = this.getEntityDef(0).getAllEntityInstancesIterator(this.getDBTransaction());
        while (dirtyItr.hasNext()) {
            Object obj = dirtyItr.next();
            if (obj instanceof EntityImpl) {
                EntityImpl entity = (EntityImpl)obj;
                String state = null;
                byte entityState = entity.getEntityState();
                switch (entityState) {
                case Entity.STATUS_INITIALIZED:
                    state = "Initialized";
                    // Don't do anything
                    break;
                case Entity.STATUS_UNMODIFIED:
                    state = "Un-Modified";
                    // Don't do anything
                case Entity.STATUS_DEAD:
                    state = "Dead";
                    // Don't do anything
                    break;
                case Entity.STATUS_DELETED:
                    state = "Deleted";
                    entity.revert();
                    // entity.refresh(Entity.REFRESH_CONTAINEES);
                    break;
                case Entity.STATUS_MODIFIED:
                    state = "Modified";
                    entity.refresh(Entity.REFRESH_UNDO_CHANGES);
                    break;
                case Entity.STATUS_NEW:
                    state = "New";
                    entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
                    entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
                    break;
                System.err.println("State : " + state);
        getDBTransaction().clearEntityCache(getEntityDef(0).getFullName());
        getViewObject().clearCache();
}Questions:
1. How to achieve my requirement? Is there any code correction required?
2. How to reset the row which is actually deleted by the user?
3. The sample code shown above is applicable for all the view object instances which are created from the same entity? What should i do if i want to reset a particular instance of a view object (I may use different instance of same view object at various screens whereas i want to reset only one)
Can anyone help on this??
Thanks in advance.
Raguraman
Edited by: Raguraman on Apr 24, 2011 8:48 PM

Hi,
As per my requirement, i use various instances of same view object in various dynamic tabs only. Since each tab has its own transaction, refreshing an EO of a particular transaction will refresh only the VO instances which comes under that transaction. So it will not cause any issue for my requirement i hope.
Requirement: Need to reset a particular entity driven view object instances.
Tried Schema: Departments table of HR Schema. Tried using the Application Module tester.
Code i use:
    // Client Interface method of DepartmentsViewImpl
    public void resetView() {
        Iterator dirtyItr =
            this.getEntityDef(0).getAllEntityInstancesIterator(this.getDBTransaction());
        while (dirtyItr.hasNext()) {
            Object obj = dirtyItr.next();
            if (obj instanceof EntityImpl) {
                EntityImpl entity = (EntityImpl)obj;
                byte entityState = entity.getEntityState();
                switch (entityState) {
                case Entity.STATUS_UNMODIFIED:
                    break;
                case Entity.STATUS_INITIALIZED:
                    break;
                case Entity.STATUS_DEAD:
                    break;
                case Entity.STATUS_DELETED:
                    entity.refresh(Entity.REFRESH_WITH_DB_FORGET_CHANGES);
                    break;
                case Entity.STATUS_MODIFIED:
                    entity.refresh(Entity.REFRESH_UNDO_CHANGES);
                    break;
                case Entity.STATUS_NEW:
                    entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
                    entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
                    break;
        getDBTransaction().clearEntityCache(getEntityDef(0).getFullName());
        getViewObject().clearCache();
Issue i have:
1. Add a blank row (Soon transaction has become dirty). Call the resetView() client interface. It gives me JBO-25303: Cannot clear entity cache model.eo.Departments because it has modified rows
2. Modify any row and then delete the same row. Call the resetView(). It gives me JBO-27101: Attempt to access dead entity in Departments, key=oracle.jbo.Key[10 ]
[NOTE: Above code works fine when for simple deletion of rows, modification of existing rows, new rows]
Edited by: Raguraman on Apr 24, 2011 8:48 PM

How to install Cisco Device Manger on Window 7

Hello
Is Cisco device manager supported on windows 7 ?
If yes how to install Cisco Device Manger on Window 7?
Please advise
Thanks
Chetan R

You can install the latest DCNM 5.x for support, please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
Support for Windows 7 and Windows 2008
In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
For DCNM-SAN installation please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
I hope this helps.
Carlos

Creating a private/isolated vlan on Cisco switch

Hello
I have many Cisco switches 65xx, 37xx at my company with a lot of vlans already configured. I need to create a new isolation vlan that will not be able to communicate with my other existing vlans. We are setting up a NAC solution at my company and we want a vlan that we can send ports to if the computer or device is compromised and cannot talk or risk the existing network (other vlans). What is the best method to make this happen?
I have created VLANs in the past but this is my first dealing with private/isolated vlans and would be grateful for any guidance on how I should implement this.

So are you saying I should just create a new L2 vlan and not configure the vlan interface (which is at L3) for this new vlan so I cannot communicate with any of my existing vlans therefore isolating the new vlan?
Yes, without an SVI clients in that vlan cannot communicate with anything outside that vlan.
The only thing that wasn't clear was whether these clients should still be able to access the internet even though they couldn't talk to any other internal vlans. If they did need the internet, or any other remote network, then you would need an SVI but it sounds as though you don't want any external communication for these clients ?
Jon

How to reset cisco switch srw224g4p

Similar Messages

Maybe you are looking for