How to reset display settings? 120 hz over HDMI on 2014 MBPr makes screen go black

Hi, I have a 15" 2014 MBPr with the 750m. Recently, I bought a TV, a vizio M422i-B1. One of my main reasons for buying the TV was to use it as a third display for my mac. I have two displays already connected, a 27 inch 1440 display over thunderbolt, and another 23" display that is 1080 and connected over the other thunderbolt.
I got the TV mounted above my desk, and ran an HDMI down from the TV to where I put my laptop, and plugged the TV in to the computer in the HDMI port on my mac.
It worked, but the refresh rate was set at 60 for the TV on my computer, but since my TV is 120Hz, I set the refresh rate in display settings to 120. It worked fine, and the mouse movement on the TV was more normal looking, so I was happy.
I put the computer to sleep a little later, and came back, and it wouldn't wake up, even after disconnecting all the displays and other peripherals, it would not wake. I restarted the computer, and with nothing connected it rebooted and worked normally.
I connected everything one by one, USB stuff first, fine. 1440 display over thunderbolt, and everything was fine. same with the 1080 display.
I went to plug in the TV again, and everything went black. I had to restart the computer without the TV plugged in to do anything. Restarting with the TV plugged in to the mac doesn't fix anything.
I know my issue is the refresh rate for the TV being set at 120Hz, and I have to change it back to 60 Hz, my problem is that as far as I know I have to have the TV plugged in to change the refresh rate, but if I plug the TV in it kills the computer. Is there a way to reset the display settings so that it doesn't "remember" that I want the TV to be 120Hz?

Did you ever figure this out?

Similar Messages

How to reset display settings?

My Sharp TV only support 1080i, so I use a DVI-DVI cable to connect a monitor, then use Mini DisplayPort to HDMI adapter connect Sharp TV.
Then boot Mac mini, I got Open Screen on Monitor, and I set HDMI adapter to 1080i, then I power off and unplug DVI cable and boot again.
Well, I got what I want on Sharp TV, it is 1080i, but I found a 720p, I selected it, now the TV becomes to black screen with "Invalid video signal"!
I reconnect monitor, so Sharp TV is ok, but if I unconnect monitor, the sharp TV will be black screen.
I thought it might be some display settings are saved, because it was good when I first use TV after set to 1080i, but I selected 720p that is PAL TV, not for mine NTSC TV, after that selected, THe sharp TV can't be used alone, how can I reset display settings? what can I do for this case?
Please help me, GOD!

In the folder of your main user account, which is generally a folder with your name on it, find and open the Library folder. Then in the Library folder open the Preferences folder. In the Preferences folder open the folder named ByHost. Inside that folder is a file called com.apple.windowserver.xxxxxxxxxxxx.plist where xxxx is a string of numbers and letters. Drag that file out onto the desktop and restart the mini.
When OS X restarts, if it finds the above mentioned file missing from the expected location, if should build a fresh copy of the file in the original location. The fresh copy will have default values in it so the Mac will forget that bad setting that happened. Hopefully that will cause the display to work again.

How to reset Preference settings in Acrobat.

How to reset Preference settings in Acrobat to default settings.

Remove restriction passcode
1. Restore to Factory Default
http://support.apple.com/kb/HT1414
2. You can restore from a backup that was done before you enable the Restriction Code.

How to reset network settings

Hello, I cant figure out how to reset my network settings on my macbook pro
I'm doing this because recently, in an effort to make my wireless work better (just bought a new router and it works great) I added an internet proxy to my network preferences (I'm ignorant to what a proxy actually is) and ever since then facebook and espn do not work on my browser. This is the message it displays on Google Chrome:
Oops! Google Chrome could not connect to facebook.com
Try reloading: facebook.com
Additional suggestions:
Access a cached copy of facebook.com
Go to facebook.co
On Safari all it says is that it cannot connect to the surver. After some proding on chrome, it told me that I should unselect any proxy's that were selected so this is what hinted to me that the reason I couldn't access these sites had something to do with the proxy meddling I did earlier. Even after unchecking all proxy settings it still doesn't work. PLEASE HELP!!!

Ok It looks like it reset the settings on the network however I'm running into the same problem with the websites I'm trying to access. Do you know how to fix this?

How to reset display resolution on a MacBook Pro

Hi,
My MBP 15.4 /2.4GHz display is stuck at a low colour display and I am unable to get it back to normal. I was working in MS Remote Desktop Connection, switched into OS X's Universal Access in System Preferences and that's when the fun started.
I've tried resetting PRAM using CommandOption+PR, but to no avail. My display settings in System Preferences show what one would expect - 1440x900, millions of colours. Changing these and switching back does nothing.
The thing is, when I start up, the desktop shows the display as it should be for a split second before it garbles the display's colours. It looks like an old Win 3.x box with 16 colour settings.
Is there a config file I can delete to reset the display, or some other way round this? Any suggestions would be much appreciated...
Cheers,
buddsbrains

Called Apple support, turned out to be a corrupt preference file; I renamed the preferences folder & rebooted & that resolved the issue. Now have to rebuild / copy back my old preferences...

VGA CRT will not "wake up".. help please. Reset display settings shortcut?

Hello everybody,
I have a mirror drive doors G4 Tower, Dual 1.25 GHz.
I have an ADC and a DVI out from the computer. Just had damage to my old studio display so I am attempting to use just one CRT running from the DVI... w/ a DVI to VGA adapter.
The first time I tried this w/ a CRT it worked fine... I played around w/ monitor settings... still worked fine. Shut down... unhooked CRT and moved that CRT away.
Tried using it with another CRT and the new CRT never started up... remained on stand-by/sleep.
I tried with another moniter... this time a LCD/Flatscreen... again VGA and it did the same thing, EXCEPT... this time when I connected the LCD to the adapter and then plugged the adapter into the DVI on my tower the LCD screen would turn on for about 1 second and display my login page. The picture was not perfect though... it was distorted someway.
Went back to the first CRT... now this one didn't work.
I think that maybe I have to reset my display settings with some sort of shortcut or something... maybe it's on the wrong frequency?
I don't know... any help much appreciated. I hate having to use this PC.
Thanks,
James

Turned out to be a faulty DVI to VGA adapter.

VGA CRT will not "wake up"... help please. Reset display settings?

Hello everybody,
I have a mirror drive doors G4 Tower, Dual 1.25 GHz.
I have an ADC and a DVI out from the computer. Just had damage to my old studio display so I am attempting to use just one CRT running from the DVI... w/ a DVI to VGA adapter.
The first time I tried this w/ a CRT it worked fine... I played around w/ monitor settings... still worked fine. Shut down... unhooked CRT and moved that CRT away.
Tried using it with another CRT and the new CRT never started up... remained on stand-by/sleep.
I tried with another moniter... this time a LCD/Flatscreen... again VGA and it did the same thing, EXCEPT... this time when I connected the LCD to the adapter and then plugged the adapter into the DVI on my tower the LCD screen would turn on for about 1 second and display my login page. The picture was not perfect though... it was distorted someway.
Went back to the first CRT... now this one didn't work.
I think that maybe I have to reset my display settings with some sort of shortcut or something... maybe it's on the wrong frequency?
I don't know... any help much appreciated. I hate having to use this PC.
Thanks,
James
G4 Dual 1.25 Mirrored Drive Doors Mac OS X (10.4.5) Some NvDia card
G4 Dual 1.25 Mirrored Drive Doors Mac OS X (10.4.5) Some Nvidia Graphics card w/ DVI to VGA adapter

Can you start up in "safe mode"? If so, you can reset your display settings and reboot. If not, you have a problem either with your video card or your DVI/VGA adaptor

Reset Display Settings

Hello,
Ive just did the Display Update and it reset the screen resolution to 800/600 when it was booted again. When i changed it to what i thought was the right screen resolution, the display turned to black and the monitor displayed a "Not supported" message. I tried to reboot the mac mini using Safe Mode (holding shift) but it wont reset the display for some weird reason. I also tried resetting the PRAM but that didnt work either..
Is there anything i can do to make it reset back to where it was when i first booted after the update?
It must be done on boot.. is there a command line interface somewhere during boot i can go in and change some settings there?
Thanks for the help.
Message was edited by: QQleQ

Hi and welcome to Discussions,
a PRAM reset http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html should reset the display settings.
Regards
Stefan

My HP2311 will not keep the detect display settings, it flips off and I cannot see my screen and have to "detect" over

My mac mini with 10.9.5 will not keep my monitor on the proper setting. I have to go into display settings and "detect monitor" again and again. How do I lock it in place? Does anyone know why the monitor detection keeps "slipping off". thank you in advance Deb Mc

I forgot to mention my monitor is an HP2311 and it always kept its setting until the most recent operating system update.

Reset factory settings and start over

My PC won't recognise my iPod any more, and has wiped out most of my songs in a failed sync.
Is there a way of resetting the factory settings and starting over, than just renaming my iPod to the previous name and letting it run a new sync?
Or is there another solution?

It is something of a fix all, but you lose everything on the iPod, so make sure that everything is safely backed up.
If your laptop is relatively new, then you most likely do have USB2/highpower/speed.

How to reset network settings but keep Time Machine backup data?

I am having problems connecting to the Internet through TC but works fine with Ethernet directly to the computer. I would like to wipe clean the network settings in Time Capsule but not lose the Time Machine backups. How to do this?
thanks
Ken

Just perform a "hard" reset on the Time Capsule (TC). This type of reset will not erase existing backups on the TC's internal drive.

HT4061 How to reset iphone5 to cancel voice over?

I was exploring some settings on my iphone5 (mainly voice over) and now I cannot scroll or select anything without double clicking on whatever is on the screen. I know I am overlooking some simple solution! I have tried hard reset by pressing on/off button and home button, to no avail. I'm really stuck, I am unable to answer a call among other things. Hope someone had this experience and can help.

Go to Settings - General - Accessibility - VoiceOver = Off.
Please note you will need to use 3 fingers to scroll to various menu items.

How to reset UDDI settings

Hi,
I tried to configure UDDI for CE 7.1 SR3 under UDDI Client.
Under Settings tab I changed the entries from localhost to my CE server IP.
Now I am getting the error whenever I am trying to open UDDI client from my index page.
500   Internal Server Error
SAP NetWeaver Application Server/Java AS
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.uddi.client.ui.be.UDDIException.<init>(UDDIException.java:44)
    at com.sap.uddi.client.ui.be.providers.ValueSetProvider.allCategories(ValueSetProvider.java:94)
    at com.sap.uddi.model.TModelFacade.executeGetAllCategories(TModelFacade.java:221)
    at com.sap.uddi.client.ui.Find.getAllCats(Find.java:458)
    at com.sap.uddi.client.ui.wdp.InternalFind.getAllCats(InternalFind.java:1003)
    ... 70 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type     HTML Client
User agent     Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1)
Client Type     msie6
Client Type Profile     ie6
ActiveX     enabled
Java Applets     enabled
Server
Web Dynpro Runtime     vendor: 'sap.com', name: 'tc/wd/webdynpro', location: 'SAP AG', counter: '7.1003.20071016135601.0000', change number: '465215', codeline: 710_VAL_REL
J2EE Engine     7.10.3301.162847.20070927153007
Server Node ID     |1482650|14826|Server 00 00_14826|01hw072953.India.TCS.com/172.17.120.152|SERVER|RUNNING
Java VM     SAP Java Server VM, version:5.1.010, vendor: SAP AG
Operating system     Windows XP, version: 5.1, architecture: x86
Session & Other
Session Locale     en_US
Session Timezone     sun.util.calendar.ZoneInfo[id="Asia/Calcutta",offset=19800000,dstSavings=0,useDaylight=false,transitions=6,lastRule=null]
Time of Failure     Wed Dec 26 16:30:30 IST 2007 (Java Time: 1198666830237)
Web Dynpro Code Generation Infos
sap.com/tcesiuddiclientui~wdp
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapDictionaryGenerationCore     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:11:08+0000, changelist=114982, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapDictionaryGenerationTemplates     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:11:17+0000, changelist=114982, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapGenerationFrameworkCore     7.1003.20070830144925.0000
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapIdeWebDynproCheckLayer     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:27:06+0000, changelist=456929, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapMetamodelCommon     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:00:27+0000, changelist=114724, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapMetamodelCore     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T16:59:09+0000, changelist=114724, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapMetamodelDictionary     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:07:44+0000, changelist=116315, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapMetamodelWebDynpro     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:13:07+0000, changelist=460161, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapWebDynproGenerationCore     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:27:14+0000, changelist=456929, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapWebDynproGenerationTemplates     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:27:20+0000, changelist=456929, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcesiuddiclientui~wdp: SapWebDynproRuntimeGen     7.1003.20070830144925.0000 (release=710_VAL_REL, buildtime=2007-09-15T17:25:44+0000, changelist=460162, host=pwdfm193, is-central=true)
sap.com/tcwdapi
WD web module webdynpro/resources/sap.com/tcwdapi: SapDictionaryGenerationCore     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:26:12+0000, changelist=114982, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapDictionaryGenerationTemplates     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:26:22+0000, changelist=114982, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapGenerationFrameworkCore     7.1003.20071010221049.0000
WD web module webdynpro/resources/sap.com/tcwdapi: SapIdeWebDynproCheckLayer     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:42:07+0000, changelist=456929, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelCommon     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:16:27+0000, changelist=114724, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelCore     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:15:08+0000, changelist=114724, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelDictionary     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:22:45+0000, changelist=116315, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelWebDynpro     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:28:55+0000, changelist=460161, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapWebDynproGenerationCore     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:42:15+0000, changelist=456929, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapWebDynproGenerationTemplates     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:42:35+0000, changelist=456929, host=pwdfm193, is-central=true)
WD web module webdynpro/resources/sap.com/tcwdapi: SapWebDynproRuntimeGen     7.1003.20071010221049.0000 (release=710_VAL_REL, buildtime=2007-10-13T17:40:46+0000, changelist=463252, host=pwdfm193, is-central=true)
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exception was thrown in preprocessing phase of application session ApplicationSession(id=c576b534b3a111dccf4f00123f5c3785, name=com.sap.uddi.client.ui.UDDI_UI). The causing exception is nested. RID=c576b531b3a111dc9dd300123f5c3785
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:649)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:224)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:228)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:192)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: java.lang.NullPointerException
     at com.sap.uddi.client.ui.be.UDDIException.<init>(UDDIException.java:44)
     at com.sap.uddi.client.ui.be.providers.ValueSetProvider.allCategories(ValueSetProvider.java:94)
     at com.sap.uddi.model.TModelFacade.executeGetAllCategories(TModelFacade.java:221)
     at com.sap.uddi.client.ui.Find.getAllCats(Find.java:458)
     at com.sap.uddi.client.ui.wdp.InternalFind.getAllCats(InternalFind.java:1003)
     at com.sap.uddi.client.ui.Inquiry.wdDoInit(Inquiry.java:152)
     at com.sap.uddi.client.ui.wdp.InternalInquiry.wdDoInit(InternalInquiry.java:374)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:58)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:230)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:367)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:209)
     at com.sap.tc.webdynpro.progmodel.window.ViewManager.getView(ViewManager.java:705)
     at com.sap.tc.webdynpro.progmodel.window.ViewManager.bind(ViewManager.java:576)
     at com.sap.tc.webdynpro.progmodel.window.ViewManager.getView(ViewManager.java:722)
     at com.sap.tc.webdynpro.progmodel.window.ViewManager.bindRoot(ViewManager.java:600)
     at com.sap.tc.webdynpro.progmodel.window.ViewManager.init(ViewManager.java:183)
     at com.sap.tc.webdynpro.progmodel.window.InterfaceView.manageEmbeddedViewManager(InterfaceView.java:126)
     at com.sap.tc.webdynpro.progmodel.window.InterfaceView.initController(InterfaceView.java:54)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:209)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:352)
     at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
     at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:500)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1185)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoPreprocessing(AbstractExecutionContextDispatcher.java:137)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppPreprocessing.doService(DispatchHandlerForAppPreprocessing.java:35)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoPreprocessing(ExecutionContextDispatcher.java:100)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:74)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:646)
     ... 41 more
After few second I am getting a blank page.
Please help me in configuration.
Regards,
Niraj

hi,
I will check for sure when I have access to the server and will write.
But I think it was under the sap.com node in the configtool. Something with uddi~ or sr~. One must search for it, then click on edit and change the configurations.
best regards,
v s

I am getting a "how to reset your Apple ID" email over 25 times a day. It's been doing this for multiple days, and it's really irritating me. How do I stop it?

This is really irritating, and blocking the email would not help, as I may need to reset my ID.
But, I'm getting one of these emails every single minute...

You may want to give this thread a read: https://discussions.apple.com/thread/5116805?start=0&tstart=0

I have downloaded a game that i have been playing on my pc and i am trying to play on my mac but the display settings are incorrect and i cannot see the whole screen to be able to use all the functions

how do you change the screen settings as my game screen is too big for the notebook screen

good afternoon
i finally found where to set up the display
the game i have is MAC compatible
i was not looking in the correct place
thanks for your reply
i am reletivley new to apple notebooks - learning all the time

How to reset display settings? 120 hz over HDMI on 2014 MBPr makes screen go black

Similar Messages

Maybe you are looking for