How to Reset Factor value at time of Reset the system.

Hello,
I am facing one problem regarding to Reset the factor value in attached vi.
In that I have used 4 button Start, OK, save, stop.
In that initially vi ask to set the factor value , then press start and reading will vary and then press OK then reading is add to the array table.
For second reading again press start and measure the reading then OK to add to array.
After some reading when I press save button its save all reading to txt file and reset the all the vi but its not able to reset the Factor value.
How can I reset the factor value also after pressing save button.
I know here its out side of whileloop so its not possible to reset in this case I tried to set it into the while loop but I didn't get success.
Please guide me.
Thank you very much.
Solved!
Go to Solution.
Attachments:
voltage force capacitance .vi ‏43 KB

This is not a TestStand question! Please post it in the LabVIEW board.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

How can I change Siri's time to match the system time?

I'm trying to set an appointment with Siri for 10:00am tomorrow. She completes the task telling me "here is your appointment for 10:00am tomorrow", but the phone is showing that it is setting it for 2:00am. The time difference is exactly 8 hours. How can I change this so that they match?

Doesn't work for me. Tried all time zone settings (both in Date/Time and Calendar) to turn on and off, to set timezone 1 hour less - no result. Everytime I have appointment set 1 hour later than Siri recognizes.
I live in Moscow, Russia, and maybe the problem is that starting this year Russia doesn't switch to winter or summer time.
Any advice?

How do Mac OS X Calendar Time Zone Reset?

OK. I seach the problem in this site and google. but, trubleshoot is always iOS.
i want delete Calender in Mac OS.Check the Time Zone support, add other time zone.
i want reset time zone. i live korea, i want see only korean stadard time. how do mac os x caldender time zone reset?
Help, please.

I am just going to give you examples of what I think you want to do.
This just shows you a list of my calendars in my iCloud account. Note the "Hide" to the right of the "iCloud"? That only appears when you hover the mouse over it.
This shows what happens with you click on the "Hide".
Notice that I've unchecked "The Boys" calendar? That makes all of the events that are located under "The Boys" to disappear.
This just shows what happens with I re-check "The Boys", note "Joo's Medication" is now showing on June 1 at 12PM?
This just shows what happens when you click "Calendars" that is next to the "+" in the gray area.
So any of my examples what you are thinking of?
KOT

How do you log values from RT target to the computer?

Hi,
I am using sbRIO 9633. How do you log values from RT target to the computer?
I created a shared variable on the RT target and used them on the log VI created under "My Computer", but I get error.
I get this error..
\\192.168.1.140\temp deployment failed (error: -1967357949, IAK_SHARED: (Hex 0x8ABC8003) Unable to query Measurement & Automation Explorer for the Shared Variable Engine. Make sure the Shared Variable Engine exists on the RT target and check that the network connection is valid.).
kdm

What are your data rates? If you are producing data "continuously", you might find that Network Streams are easier and more reliable than Network Shared Variables. In any case, you need an "engine" on one side (Host or Target) or the other. I'm streaming 24 channels of 16-bit data from a PXI controller to a PC this way, with three other streams handling two-way messaging and transmission of "occasional" time-stamped data to the PC.
Bob Schor

How to copy NCLOB value(Contains Word Document) into file system

How to copy NCLOB value(Contains Word Document) into file system or display in sqlplus

The UTL_FILE package will write it only to text file not(NCLOB Value[containts images as well as text])

How to View Outlook Messages in Timezone different from the Systems Time.

Hi Team,
My Name is Abhishek. I am from India.
I just want to know one thing related to MS Outlook 2007 Version.
To deal with Hongkong customers and to work in database we have kept the systems time as HongKong Time (GMT + 07: 30) in my official Laptop.
So. when I receive any email in the Inbox it shows the message received time in Hong Kong Time which is the systems Time right now.
But As I stay in India, I just want to see my all Outllook received Messages in Indian Time (GMT + 05: 30), without disturbing the systems time. I just get confused when I receive any email and it shows in systems Hong Kong Time.
Is it possible to change my outlook message receiving display time to Indian time without disturbing my systems time...If so, pls help me by telling the procedure how to do it...
Thanking You
Abhishek

Hi Abhishek:
There are no
Daylight saving time for HongKong Time Zone and also for the Indian Time, so the checkbox will be greyed out.
As
Nezer mentioned above: “Adjusting the time zone in outlook also alters the system time, I think outlook is design to always mirror the time zone of you system clock.” We couldn’t change
this within Outlook.
Thanks for your understanding.

Report the date and time of all the systems reporting to sccm

Hi,
We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
Appreciate any help regarding this.
Thanks

Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

IPhone 5s restored from 4s all but my photos and won't finish. Have tried reset and restore several times but always the same thing. Pat bottom of screen it shows downloading but no pictures transfer.

Have tried 4 times to reset, erase and restore but always the same result. Everything restores except my photos. When I go to photos at the bottom of the screen it says downloading but the pictures never transfer. Every time I turn my phone on it asks to continue restore but it never finishes. It won't let me upgrade to the latest iOS due to incomplete restoration.

How long has it been since you let the restore just happen? Sometimes photos are what takes the longest to bring back from an iCloud back up. I would recommend that you let it just keep restoring for about 2-3 days and see if more photos come back than what you're experiencing. Also make sure that you are connected to wifi as much as possible so that those photos can be downloaded faster. It is a waiting and being patient kind of thing. I did an iCloud restore from a backup that took 4 days to finish bringing down all my photos.

How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

How do you change values after logging data to the citadel database (DSC)?

How would one go about changing values that already exist in the citadel database. So say I were logging a numeric value with a timestamp for 1 year and then wanted to change a few values for the month of June because my sensor wasn't working at that time. How could I do this? Is it possible without re-creating the whole database over?
Thanks
Matt

mattyk wrote:
Hey Ben,
Thanks for the quick response. I called NI and asked about this because this would be a big show stopper for me. Their applications engineer said that the best way to change previous data would be to read in the trace that you want to change, modify it and save it as a new trace. I am also looking into SQL querying. I was able to connect to the citadel database by setting up a ODBC data source and using the database connectivity toolkit to query the database. This worked. Now I am trying to come up with a statement in SQL to change previously saved data. I'll Keep you posted.
Thanks
Matt
That reinforces my suspicions.
I have an app running for about 8 years now that keeps a paper trail to enusr ethe cartdiges used in respirators (operated NIOSH National Institute of Occupational Safety and Health par teh CDC) that use DSC to enusre nobody can ever falsify those records. If they can be hacked I my customer and anyone using a respirator with a NIOSH sticker on the side of it, want to know.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to enter a value versus picking one from the pop-up menu?

I am new to numbers and am using version 3.5.2. I understand one can define a Pop-Up for cell value selection, but what if I want to also be able to specify a value that is not in the pull down? I thought "start with blank" would do the trick, but it won't let me enter any values. Thanks in advance for your suggestions!

Hi Sultry,
If your entry is a one time deal you could just delete the cells value and type in your choice. If you want to update your popup you need ot redefine its values. And then of course replace your old popups with your new one.
quinn

How to compare, current value in :block.text_item with the database value

Hi
Could you please tell me
How to compare the current value in :block.text_item with the corresponding database column value.
I am using forms 10g
There is block and there is an text Item in that block.
When I run the form and query the block (tabular), the :block.text_item shows me, whatever value there in the database.
Now I add some value in the :block.text_item to the existing value.
now
the :block.text_item contains old+ new added value
whereas
the database table contains 'old' value
Now on a button click , I want to find out what is the value that I have added
Could you please tell me, is it possible without writing a select query?

Hello,
Now on a button click , I want to find out what is the value that I have addedSo you mean always user will add value in the existing value. Because this way will fail in one case. Let say
Value in Database is = ABCD
User opened the form and he removed the D and write E and now value is ABCE and length is still same 4. So, there is no addition.
Anyway you can know the database value at runtime there is one property for item called DATABASE_VALUE. It gives the value which is in database while you are running the form before save. and you can use like this..
Trigger = WHEN-MOUSE-DOUBLE-CLICK on item level
DECLARE
vItemValue DATATYPE; -- Set the data type according to your desired field.
vValueAdded DATATYPE; -- Set the data type according to your desired field.
BEGIN
vItemValue:=GET_ITEM_PROPERTY('ITEM_NAME',DATABASE_VALUE); -- It will return you the database value in vItemValue variable.
IF LENGTH(vItemValue)>LENGTH(:FORM_ITEM_NAME) THEN -- It mean something change or added
vValueAdded:=SUBSTR(:FORM_ITEM_NAME,LENGTH(vItemValue)+1);
MESSAGE('Added value is : '||vValueAdded); -- It will show you the added value.
END IF;
-- now suppose you want to show the old and new value in message not the added one
-- Then no need of IF condition. You can just use message like this
-- And i would prefer to use like this way
MESSAGE('Old Value : '||vItemValue||' New Value - '||:FORM_ITEM_NAME);
MESSAGE('Old Value : '||vItemValue||' New Value - '||:FORM_ITEM_NAME);
END;Hope it is clear.
-Ammad

How can I uninstall Labview run time engine from the machine?

I understand that Labview has not given any provision to show customized 'License Agreement screen'. Isn't it? This is the main cause of my problem. Since I want to show our own license agreement (LA) screen, I made the one using Labview. To show this license agreement screen, I first install a small application which has only this LA screen with Labview run time engine. The customer can see License Agreement Screen with Labview Run Time Engine on his machine. If My customer accepts the LA, I will install the main application further by calling another setup.EXE file.
If my customer selects 'Do Not Agree' to the LA, I will quit the installation process. Here I also want to 'uninstall' Labview Run Time Engine
from his machine since he doesn't accept License. I would like to know how to uninstall Labview run time engine from his machine?
Another way which I could think is to run the LA screen from the CD with Labview run time engine on the CD. I will start installing the main S/W to the customer's machine with LABview Run Time Engine only after he accepts License agreement. I would like to know how to run the Labview application from CD without installing run time engine on the target machine?
Can anyone suggest solution to my problem?
Thanks,
Chander

J-Tek,
I would suggest re-installing the Run-time Engine and then uninstalling it after a reboot. Also, you can download a program called Msicuu.exe (for NT, 2000, XP or Msicu.exe for 9x) to help clean up the registry for uninstalled programs.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How to pass a value from jspx page to the managed bean

hi,
i have created a jspx page and manages bean with page flow scope..
in my jspx page i am searching a employee record from the data base . and getting entire employee details including 'status' as a search result.
here i want to pass the value of 'status ' field to the managed bean variable called 'stval'.
can anybody suggest any solution?.......

As per the details provided in the post above, when the user clicks on the search in the af:query, the results are populated in the table. And you are interested in getting the value of particular column. This could be done by having the custom row selection listener to get the value of the current row (selected row in the table).
1) Have a custom selection listener:
<af:table value="#{bindings.EmpDeptVO.collectionModel}" var="row"
rows="#{bindings.EmpDeptVO.rangeSize}"
emptyText="#{bindings.EmpDeptVO.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.EmpDeptVO.rangeSize}"
rowBandingInterval="0"
rowSelection="single" id="t1"
partialTriggers=":::qryId1 ::ctb1 ::commandToolbarButton1"
columnStretching="column:c1"
styleClass="AFStretchWidth" columnSelection="multiple"
first="0" contentDelivery="immediate" autoHeightRows="10"
binding="#{pageFlowScope.ExampleBean.searchResultsTable}"
*selectionListener="#{pageFlowScope.ExampleBean.rowSelected}">*
2) In the method, set the current row programmatically:
ADFUtil.invokeEL("#{bindings.EmpDeptVO.collectionModel.makeCurrent}",
new Class[] { SelectionEvent.class },
new Object[] { selectionEvent });
3) Get the current row and get the required attribute values and set it in any of the variables in the managed bean:
Row selectedRow =
(Row)ADFUtil.evaluateEL("#{bindings.EmpDeptVOIterator.currentRow}");
String status = selectedRow.getAttribute("Status");
Thanks,
Navaneeth

Upgraded to FF4 now it keeps telling me to reboot for upgrade to go into effect, regardless of how many times i reboot the system

Went to upgrade to FF4 upgraded, and it told me to re boot the system to complete installation. Clicked to confirm reboot and screen closed down. PC chose that moment to have a power failure and when I switched it on again, I'd lost firefox and now every time I try to load firefox, the box comes up telling me to reboot the system to complete installation. When I reboot, nothing happens, it's like it's locked in a loop. curently cannot access any version of Firefox.
I need to preserve my bookmarks and remembered passwords, otherwise I'd uninstall and reinstall from scratch. what can I do?

Try rebooting the computer, do NOT open Firefox and then try the clean reinstall.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

How to Reset Factor value at time of Reset the system.

Similar Messages

Maybe you are looking for