How to reset ipad 2 for new owner

I am trying to rest my husbands iPad 2 for my personal use. I keep being prompted for his iTunes password, which I do not  know. even restarting the machine will not alleviate the problem. How do I rest the iPad?

You need his password or to have him deactivate Find My iPhone.
Allan

Similar Messages

  • How do i to totally reset iPad for new users?

    How do i to totally reset iPad for new users?

    Welcome to the Apple Support Communities
    Open Settings > General > Reset > Erase All Content and Settings. After erasing your device, turn it off holding Sleep button

  • How to prepare MacBook for new owner?

    I'm selling my Intel MacBook Pro and I would like to restore it to factory-new condition for the new owner.
    I know how to install OS X from the included discs, but after the installation it launches right into the first-time setup (name, registration, network configuration, etc.).
    I don't want to do this setup — that's information for the new owner to key in. But I see no way to exit out of it gracefully, so should I just power down the machine at this point? I assume the next time it's started (by the new owner) it will simply try the first-time setup again.
    Is there a more graceful way to exit the installation and shut down the machine without doing the first-time setup?
    Thanks.

    Wow, this is really great. Exactly what I was looking for, except that I'm not sure I have another volume (e.g., FireWire drive) I can boot from to delete the administrator account.
    If the timing works out such that my new laptop arrives before I have to ship the old one, then I'll be all set.
    Thanks.

  • Resetting iPad for new user

    Sorry...I'm new here and I think I posted this under a wrong Community. i went to Browse Communities below and there was nothing to do with iPad so I chose Appleworks. But I'll just type in 'iPad' after this and try my luck.
    Here's my earlier post:
    Hi all.
    I've read that Erase All brings the iPad back to how it was when it left the shop. But I need to comfirm something 'cos here's the situation:
    1. I just sold my mum's iPad to a third party shop. All done, or so I thought.
    2. I get a text asking for my Apple password so they can format the iPad.
    3. I reply that it's not needed for Reset All/Erase All. (NOTE: No Passcode was set on iPad)
    4. I get a text today saying: "But we need to change the app store. Otherwise if any other person buy it they cannot create new account. Maybe you can come and type it. After that we can reset in front of you."
    Does the shop really need my password? I was under the impression that Erase All would do a factory reset and clear my Apple ID from the IPad too. Then the next person just sets up their own ID.
    By the way, this is not a shop I really trust which is why I'm being so cautious. Also, I don't fancy going all the way there again.
    Thanks so much in advance and sorry for the long ramble
    Andrew
    Will 'Erase All Content and Settings' remove Apple ID from my iPad 2?

    You must remove device from your account before they can activate it.
    http://support.apple.com/kb/TS4515

  • Resetting iMac for new owner

    I have a 24" iMac with Lion on it... I have a Time Machine Backup of the machine and now I need to basically wipe it clean so I can sell it, How do I go about doing that?  I assume that Lion will remain on it (since it was an upgrade), and what about the iLife and iWork suite that is on it?  Do I need to resintall all that when its reset?
    I am selling it to a new Apple user (never had a Mac before)... so the easier I can make it for them the better...
    Thanks!

    Prepare Your Mac for Sale
    Boot from the OS X Installer Disc One that came with the computer.  After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.  After DU loads select the startup volume from the left side list then click on the Erase tab.  Set the format type to Mac OS Extended (Journaled) then click on the Options button.  Select the one pass Zero Data option and click on the OK button.  Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive.  If you choose to skip this part of the process then it is possible for others to recover data from the hard drive.  The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive.  After formatting has completed quit DU and return to the installer.  Now complete the OS X installation.  At the completion of the installation do not restart the computer.  Instead just shut it off.  The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

  • How to reset UID for new created accounts?

    Hi everyone,
    OS X uses the UID 501 for the first admin account and subsequently counts up for the coming accounts (502, 503, etc.). I sometimes need to create an additional account which will get deleted after a while. The next time I create such an account the UID counter goes still up so that I currently am somewhere around 510.
    What I’d like to know is, how does one reset the UID counter so that it will give out 502 again for my next created account? Does this involve dsctl? Any help is appreciated!
    Björn

    Sorry for taking so long to get back to you, but I was away for a week. I know about the advanced options, but was reluctant to try it this way. Just tested this in a VM and it works! You simply change the UID via System Prefs/Accounts/Advanced to say 502 and the subsequent accounts will follow. The only thing to keep in mind is to close System Preferences after deleting accounts in order to reset the counter. If you continue to create new users without quitting it first, it will continue at 511 or whereever you were.
    The reason I want to do this, is simply to not lose my overview about which account uses which UID.
    Thanks!
    Björn

  • Ownership change, how to clear out for new owner?

    I need to know how to properly clear out everything on my kids Hp touchpads before they sell them?  What's the best way?

    Hi,
    The best way is bring it back to factory settings that means the machine will be set back to the day you opening the box. Please try:
    Open the launcher,
    Go to the Settings tab,
    To  Device Info,
    Touch  Reset Options,
    Tehn select Full Erase or Secure Full Erase (takes longer but more powerful erasing).
    Regards.
    click the launcher up arrow
    Click on the Settings tab
    Click Device Info
    Click Reset Options
    Click Full Erase or Secure Full Erase (takes longer but more powerful erasing)- See more at: http://datadele.com/question/how-do-you-factory-reset-hp-touchpad#sthash.uZqO1qNm.dpuf
    click the launcher up arrow
    Click on the Settings tab
    Click Device Info
    Click Reset Options
    Click Full Erase or Secure Full Erase (takes longer but more powerful erasing)- See more at: http://datadele.com/question/how-do-you-factory-reset-hp-touchpad#sthash.uZqO1qNm.dpuf
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT204053 Just updated my login to apple on mac but ipad still displaying old email for login.  Anyone know how to update ipad to new login details?

    Just updated my login to apple on mac but ipad still displaying old email for login.  Anyone know how to update ipad to new login details?

    Hello Beeched,
    Thank you for the question.  Are you seeing the previous Apple ID in the iTunes and App Store?  If you are, use these steps to sign in with your new Apple ID:
    Sign in with a different Apple ID
    Tap Settings > iTunes & App Stores.
    Tap your Apple ID.
    If you see the option to Sign In, you can change your Apple ID now.
    Tap Sign Out.
    Enter your Apple ID and Password and tap Sign In.
    Or if you don't have another Apple ID, tap Create New Apple ID.
    You can find the full article here:
    iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht1311
    If you trying to change the Apple ID signed into iCloud, use these steps:
    On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Once you delete the account from your device, you will have an option to sign in with your new Apple ID in Settings>iCloud.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1430 how to reset ipad if forgot password

    How to reset ipad if i forgot my password

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to add support for new file type.

    Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
    I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
    I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
    Thank you

    Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
    Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
    CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
    LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
    I have done this but still not able to recognize the new file type.
    At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
    extension.xml
    <?xml version="1.0" encoding="windows-1252" ?>
    <extension xmlns="http://jcp.org/jsr/198/extension-manifest"
               id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
               rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
        <name rskey="EXTENSION_NAME">My Code Editor</name>
        <owner rskey="EXTENSION_OWNER">Me</owner>
        <dependencies>
            <import version="10.1.3">oracle.jdeveloper</import>
        </dependencies>
        <hooks>
            <jdeveloper-hook>
                <addins>
                    <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
                </addins>
            </jdeveloper-hook>
            <feature-hook>
                <description>My Code Editor</description>
                <optional>true</optional>
            </feature-hook>
            <document-hook>
                <documents>
                    <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                        <suffix>my</suffix>
                        <suffix>MY</suffix>
                    </by-suffix>
                </documents>
            </document-hook>
            <editor-hook>
                <editors>
                    <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                        <name rskey="EXTENSION_NAME">My Editor</name>
                    </editor>
                    <mappings>
                        <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">         
                            <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                       preferred="true"/>
                            <open-with editor-class="javax.ide.editor.CodeEditor"/>
                        </mapping>
                    </mappings>
                </editors>
            </editor-hook>
        </hooks>
    </extension>
    public class MyAddin implements Addin {
        public static final String MY_EXTENSION = "my";
        public void initialize() {
            System.out.println("MyEditor Constructor");
            new MyLanguageModule();
            Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
            CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
            LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
    }I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
    Todd

  • If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
    2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
    Here are the links:
    http://store.apple.com/us/product/MD098ZM/A
    http://store.apple.com/us/product/MC552ZM/B

  • How to maintain cluisterview for new business roles in SAP CRM2007

    How to maintain cluisterview for new business roles in SAP CRM2007.
    Table - CRMV_UI_NB
    Regards,
    Biplab

    I also look forward to a 'solved' answer to your question.
    In the meantime, I'm curious to know if there are any organizations today running SAP B1 HANA for their production system.   Would you know of any?

  • How to reset password for user sap*

    Hi friends,
    How to reset password for user sap*  if any solution please mail me.
    Thanks,
    Yogesh

    Hi,
    <b><u>Steps for Reset SAP* Password</u></b>
    If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
    STEP-1: Enable "SAP*"
    1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
    Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
    2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
    3.Double-click on the property "ume.superadmin.activated = TRUE"
    4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
    5.Save.
    6.Restart the engine.
    STEP-2: Login with "SAP*" into portal
    1. http://<host>:<Port>/useradmin/index.jsp
    2. Enter userid / password as" SAP* / <password ex: abc123>"
    3. Search for "Administrator" user
    4. Reset or change password for "Administrtor"
    STEP-3: Disable "SAP*"
    1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
    Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
    2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
    3.Double-click on the property "ume.superadmin.activated = FALSE"
    4.Save.
    5. Restart the engine.
    STEP-4: Login with "Administrator"
    1. http://<host>:<Port>/useradmin/index.jsp
    2. Enter userid / Password as "Administrator / <password>
    3. it will ask change password just change it.
    Please follow steps one by one. it should resolve your issue.
    Thanks,
    Nagaraju Parlapalli

  • How to reset password for a web user via GUI?

    Hi,
    How to reset password for a web user ID via GUI? is it possible?
    Thanks.

    Hi,
    You can  reset the pwd for the user through trascn SU01.
    BR,
    Disha.
    *Pls reward points for useful answers.*

  • How to reset password for iomega storecentre ix2

    hi! how to reset password for iomega ix2?

    There is a pin hole reset button on the back. This will reset user and network settings. Here is a link to the directions.
    https://lenovo-eu-en.custhelp.com/app/answers/detail/a_id/32232/kw/reset

  • When replacing an accidentally damaged idevice can you opt to replace it with a different model, ie broken 4th gen ipad for new iPad mini?

    When replacing an accidentally damaged idevice can you opt to replace it with a different model, ie broken 4th gen ipad for new iPad mini?

    No. the replacement is always the same as the item being replaced.

Maybe you are looking for