How to reset my iPod touch without lost the games I paid

I have iPod touch 4 version 6.1.6 and the battery is gone very easily even it was charging all the night maybe overcharging and now is frozen sometimes could you help me what do I do

I'm a little unclear regarding what you've already done so I'll start from the beginning.
First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

Similar Messages

  • HT4113 how to unlock an ipod touch without knowing the password

    how to unlock an ipod touch without knowing the password

    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • How to restore your ipod touch without knowing the password or having the original computer

    how do i restore my ipod touch? i dont have the password or the original computer.

    Connect in recovery mode and restore: iOS: Unable to update or restore
    All your data on the device will be lost, apps and bought media from iTunes can be downloaded again for free:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Is there any way that you can reset an iPod Touch without using the lock button?

    Okay, so my lock button on my iPod is broken and my iPod is working kind of slow so i was wondering if there is any way that I can reset it without using my lock button?

    this is true assesive touch will not work i have to admit i did try using assessive touch

  • HT1212 how to reset your ipod touch

    how to reset my ipod touch when wrong passcode results in red disabled screen?

    Restore it.  if you are unable to restore
    iOS: Unable to update or restore
    iPod touch User Guide (For iOS 5.1 Software)

  • How to reset my iPod touch thats disabled it doesn't work even charging

    How to reset my iPod touch thats disabled it doesn't work even charging

    If the sleep/wake button doesn't work use the home button and if the home button doesn't work it's the other way around, however if both of them don't work charge it with your connector connected with your computer or wall socket and it will turn on. Hope this helps.

  • Is there a way to download free apps on ipod touch without giving the credit card information?

    Is there a way to download free apps on ipod touch without giving the credit card information?

    this should help everyone who wants to down load apps with out using a credit card  http://www.ehow.com/how_5077261_download-apps-itunes-credit-card.html  http://www.ehow.com/how_6502723_create-itunes-account-credit-card.html  http://www.ehow.com/how_6520859_use-ipod-touch-credit-card.html

  • HT201240 I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

    I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you are unable to boot from an installer DVD:
    (these will only work on Leopard or earlier)
      1. Boot to Safe Mode by restarting and after the chime press and hold down
          the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each
          command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command
         until you do.  If after seven tries you still do not receive a "Filesystem OK"
         message, then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    Reset Admin Password Using The Terminal
    You can reset the password by printing out (or writing down) and carefully following these steps.
    First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
    Now, start in Single-user Mode. It should boot into a command line.
    Enter these exact lines. Press RETURN after each.
    mount -uw /
    ifconfig lo0 up
    cd /var/db/netinfo
    netinfod -s local
    Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
    The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
    Now, enter:
    sync
    reboot
    and the machine will reboot. The admin password should now be changed.

  • How can i Reset my ipod touch without the home-button

    My ipod Touch resseting all the Time with out showing the home display. An other problem is, that my guarantee is over and my home-button is not working. So what should i do? Buy a new one or is there a chance to reset my ipod without home-button?
    Please Help me. Thanks in advance.
    Dom

    - Try placing the iPod in recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - This program may get it in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage
    - DFU mode may work:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT1320 how to reset my ipod touch 4. screen is showing Ipod is disabled try again in 22,499,542 minutes?

    I have a Ipod touch 4th generation. The screen is locked and is showing Ipod is disabled. Try again in 22,499,536 minutes. How do I fix this???

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT3728 how to reset my ipod touch

    I have been locked out of my ipodtouch and do not know the passcode

    Please check out the following Apple Support article for the details on how to reset your iPod.

  • HT1430 How to reset an iPod touch locked?

    How to Rest an iPod touch locked!!

    Put it in recover mode.
    Explained here:
    iOS: Unable to update or restore

  • How to reset my ipod when i forgot the code

    how to reset my ipod code when i forgot it

    You must connect the device to iTunes and restore it to factory settings.
    Restoring iPod to factory settings
    B-rock

  • How to reset a forgotten password on an ipod touch without using the computer it was synced to?

    My friend has this ipod touch 4gen and she no longer has the laptop itunes was on. So she sent me on a mission to reset the ipod she has now forgotten the password to. When i plug it into my computer it says "itunes cannot connect while device is locked. please unlock" or something like that. uhm... only problem is the reason why im plugging it in is to RESET THE **** THING BECAUSE SHE FORGOT THE PASSWORD. im obviously frustrated. So seriously, there has to be some way to get this thing to reset without putting in the password that no one knows into it. Help? im not a computer tech in the first place.

    You have to restore it.
    If you cannot then:
    iOS: Unable to update or restore

  • HT1430 If my iPod was given to someone else and they changed the reset code, how do I reset my ipod touch without that password?

    My Dad gave my step sister my ipod last year. She changed the password to do a master reset. I called Apple, and I gave them the serial number but got nothing out of it. Because I wasn't paying $20 to talk to a representative. I need someone to tell me how I can find the password and get it changed so i can reset the whole iPod.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Spry Menu Background image not working in IE

    I have created a website using Dreamweaver CS5 and having trouble with my Spry bar in internet explorer. It looks great in chrome, firefox, etc, but in IE there is a white background instead of my background image and the submenus have moved WAY righ

  • Crystal Report parameters presentation in InfoView

    I have a report, based on a SQL store procedure with parameters. It passes parameters thru Business Views to report and presents them in info view, producing following for each parameter: 1. description (on the left) 2. sql internal parameter name, s

  • IMAPFolder.doCommand() com.sun.mail.iap.BadCommandException

    I'm attempting to run "SEARCH ALL" on my INBOX using IMAPFolder.doCommand(). I'm using the api documentation at http://java.sun.com/products/javamail/javadocs/com/sun/mail/imap/IMAPFolder.html#doCommand as a starting point, I was able to run the IMAP

  • Exchange Online Protection (EOP) instead of EDGE server ?

    Hi, we have Exchange 2010 with HUB server in LAN and EDGE in DMZ. There is an EDGE subscription on HUB and we use EDGE Sync. We have Forefront Protection 2010 for Exchange (FPE) installed on EDGE. Our license for FPE is coming to end and because FPE

  • Volume changes: cracking

    I have the following problem: If I reduce or increase the volume, I can hear a cracking on the left channel. This particularly arises with songs with much bass (EQ off !). Someone know this? solarplex ipod 5G   Windows XP