How to reset or clear computer.

I'm looking to clear up space on my computer or even reset it to factory settings. Since i have a Macbook Air i do not have any discs to reset. If someone would help that would be great! Thanks!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Similar Messages

  • How to Reset and clear Ipod touch

    I have an Ipod Touch that was given to me and I want to reset and clear all content. It is requesting a 4 digit # code.  Any idea how to get that code?

    Place the iPod in Recovery mode and then connect the iPod to your computer and restore via iTunes. Restore to factory default/new iPod.

  • How to Reset BIOS/Clear CMOS of an HP Pavilion 500-111ea

    Hello,
    I was trying to change my computers boot logo because i dont like the HP one, and now when i try to enter my bios i get beeping, can anyone tell me how to reset the BIOS/Clear CMOS, this will be much apreciated. The computer still works fine, i just cant enter the BIOS or the UEFI Firmware Settings thing. When pressing F10 at boot up the computer beeps 8 times
    My computer is a HP Pavilion 500-111ea
    Regards,
    Kieran
    <I posted this in the wrong selection a few moments ago, i hope this is the right place this time.>

    Hi,
    Please explain in detail what changes you made in an attempt to change the boot logo.
    HP did not post a clear CMOS procedure for your model PC.  Review the below image.  Unplug your PC, hold down the power button for 1 minute. Now open up your PC and move the jumper blocks over to the left per the image for 30 seconds and then move the jumper blocks back. Plug the PC back in and give it go.  If you still get the eight (8) beeps then you could try a ROM image recovery.
    Eight (8) beeps in an invalid ROM image.  Review this HP posted article for trying a BIOS recovery.
    You might try this HP tools software.  Download the software to a different PC and create the USB 2 bootable tools flash drive. If you can get the flash drive to boot up then look for a firmware management selection.  There is not any documentation available on how to use this function so you are on your own.  HP Support might be able to assist you with a BIOS recovery and/or you might be faced with sending in your PC to an authorized HP repair facility to have the BIOS reflashed.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How to reset password on computer

    Does anyone know how to reset the password on the security of the computer...I forgot my password

    #6 here
    ..Step by Step to fix your Mac
    or if you on Snow Leopard and you don't have the disks
    Snow Leopard 10.6 password reset, no disk method
    If you get a lock, thats a firmware password and it's another method

  • How to reset partial clearing item:

    In my case, I have 5 Downpayment requests and cleared them in one bank posting. But some months later, I found one item is mistake and should be reset and reversed. At the same time other 4 items had been further delt with and can't be reversed again. Now, how can I do to reset this error item but don't affect other posting?

    Hi,
    I think it is not possible to reverse one line item, if there are goup posted.
    Rgds
    sunfico

  • HT1212 how to reset ipod without computer?

    My daughter forgot her passcode to her ipod touch and now it is locked up. How do I reset it without using a computer or itunes?

    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You need the iPod and iPad conencted to the interned and FindMyiPod turned on on the iPod an the iPad need to have the FindMyiPhone app installed. That now requires iOS 7 on the device.
    You can also wipe by on a computer/s browser, going to icloud.com>FindMyiPhone

  • 8310 Password Enabled Locked....How to reset and clear lock to disable password?

    My 8310 phone has a lock on the Password Enabled, and I can't clear or change setting to disable password. Also, the security time out is locked, so I can't change the time either. Please help, I want to reset the phone so that it isn't locked and I can disable the security password.

    Yes. If you know who's company is was a part of, the BES admistrator can send a default IT policy to device to remove any restrictions from the device. I also found you can try removing the policy yourself. I've never tried this, but here's a link describing how to do so: http://www.blackberryfaq.com/index.php/Remove_IT_Policy
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    Is the Paper Size: set to US Letter and Scale: set to 100%
    Dennis

  • Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset passowrd, authorized computer, & repaired itunes when reinstalled. Any suggestions on how to successfully connect?

    Using USB to connect to itunes with iphone.  Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means?  Thanks

    0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.

  • How to reset computer password if I forgot my original password?

    how to reset computer password if I forgot my original password?

    What is the version of OS X installed?
    Is it OS X Yosemite?
    Is it a new computer?

  • HT5312 How to reset my security question(s); I am still not clear on the explanation given

    How to reset my security question(s); I am still not clear on the explanation given

    I may not be making myself clear on what I have done;
    Initially, I went through the steps to answer the security questions; I was only able to answer one, then I reached the maximum amount of attempts for the second question.
    I then tried the steps; to the page to click on 'manage my id'; then I signed back in and clicked on the line on the left side of page that reads "password and secuirty"; which then states; "We apologize, but we were unable to verify your account information with the answers you provided to our security questions - You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours".  
    The thing is, I am not and was not trying to reset my password, only the security questions - for the past 2 - 3 hours I have been trying this.
    I have also tried to get phone assistance and I keep getting e-mails that Apple has tried to call - no one has called my number, I have been sitting by the phone for the pastg 3+ hours . . . .
    I am not sure what else to do at this point.
    Anthony

  • HT1212 How to reset your iPad without having it synced to a computer and not knowing your password?

    How To reset iPad without having it synced to a computer and not knowing the password????  I changed my password and have forgotten it is there any way I can access and get on it??? Thanks

    You must use a computer. There is no way around it for you.
    You have to restore the device within iTunes. You can restore with any other computer, but you will lose everything on the iPad. You will have to download all of your purchased content again after you unlock the device.
    You will have to use recovery mode
    iPad: Unable to update or restore

  • My mouse is frozen and turning the computer on an off did not reset it.  How do I unfreeze the computer?

    The mouse does not move the cursor.  Resetting the computer did nothing.  I had connected a Seagate Backup drive to the computer prior to this happening.  How do I unfreeze the computer?

    Disconnect that drive.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • How can I reset and clear my iphone with no wifi

    How can I reset and clear m iphone without any wifi

    Settings > General > Reset > Erase All Content & Settings

Maybe you are looking for

  • Support desk configuration from portal

    Hi all is anybody configured sending message from support desk in portal to solution manager ? i followed this link http://help.sap.com/saphelp_nw04s/helpdata/en/84/91bfddb6c33246a6eae4d483749635/frameset.htm i am getting 102 jco exeption error but i

  • Inbound Idoc error notification. Help needed

    Hi Gurus, Sorry, maybe it's a silly question. I have a requirement to send an email when occurs any kind of error at inbound processing. The dest. of this mail must be the postprocessing agent from partner profile (WE20) of the message. I have standa

  • BB usage monitor - random number generator yet aga...

    A few months ago the BB usage monitor told me I had usage levels that were simply not possible.  When I dug deeper, everyone I work with who has BT also got the dire warning they were over their limit that month - even those with 40GB limits that wer

  • Oracle is Case Sensitive, can we change this.?

    Hi all, As Oracle Data is a Case sensitive. but i want to know that, is there any way to change this ? that is , the data should not be a case sensitive. select * from emp where ename = 'smith'; Even the SMITH is in caps. it should return that record

  • Dependant(?) Data Merging

    Windows 7, InDesign CS4, Excel 2010 I hope this makes sense:      I have a project that involves making labels for about 800 SKUs. I've merged data before when making labels like this and it worked great (it's been a while though). Anyway, this proje