How to reset password for file sharing?

Greetings,
I need some help in reconfiguring my network password that I no longer can remember (should have written it down, live and learn). I have two iMacs networked via a router. On one of them, due to the password problem, I can't connect to my other computer. I would like to "clean up" and set everything correct. That is, ID on the chooser, file sharing etc. to be consistent and start fresh with a new password. Is this possible without having to reload my software? If so, can anyone give me some directons? Thanks in advance for any help.
iMac-DV Mac OS 9.2.x

Duane,
yes at one point i think I had the multiple user enabled, but I still had one password to access from both A & B computers, so it will be simpler. For some reason the A computer works and I am able to see B via the file sharing. But not the other way around. It is possible I may have used another password, and now I forgot it on the other computer. Now I want to know is, if I can redo the whole thing where I can configure both computers and set up a new password (I will make sure I write this down some where). Thanks for your assistance, I do appreciate it.
Kalia
iMac-DV Mac OS 9.2.x

Similar Messages

How to Reset password for a shared numbers file?

How can one change a password for a numbers file shared in iCloud ? I have lost the password ...
Unfortunately I cannot open the file now either on my Mac or from iCloud.
Nothing in settings that would allow to reset password to a file.
What am I missing?

Hi,
You can reset the pwd for the user through trascn SU01.
BR,
Disha.
*Pls reward points for useful answers.*

Reset password for file sharing

How do I delete existing users from the file sharing window. I want to delete all users and begin again from scratch. I will be using a Windows laptop to access files on the iMac...

Duane,
yes at one point i think I had the multiple user enabled, but I still had one password to access from both A & B computers, so it will be simpler. For some reason the A computer works and I am able to see B via the file sharing. But not the other way around. It is possible I may have used another password, and now I forgot it on the other computer. Now I want to know is, if I can redo the whole thing where I can configure both computers and set up a new password (I will make sure I write this down some where). Thanks for your assistance, I do appreciate it.
Kalia
iMac-DV Mac OS 9.2.x

How to reset password for user sap*

Hi friends,
How to reset password for user sap* if any solution please mail me.
Thanks,
Yogesh

Hi,
<b><u>Steps for Reset SAP* Password</u></b>
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.
Thanks,
Nagaraju Parlapalli

How to reset password for a web user via GUI?

Hi,
How to reset password for a web user ID via GUI? is it possible?
Thanks.

Hi,
You can reset the pwd for the user through trascn SU01.
BR,
Disha.
*Pls reward points for useful answers.*

How to reset password for iomega storecentre ix2

hi! how to reset password for iomega ix2?

There is a pin hole reset button on the back. This will reset user and network settings. Here is a link to the directions.
https://lenovo-eu-en.custhelp.com/app/answers/detail/a_id/32232/kw/reset

How to reset password for XELSYSADM user in OIM?

Hello Gurus and Experts!
How to change password for XELSYSADM user in OIM?
Your help is appreciated.
Edited by: mc2 on Aug 25, 2011 4:27 PM

Follow the undermentioned steps to change the password:
1) Change the password from oim Design Client as usual.
2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
<Scheduler>
<XLUserName>xelsysadm</XLUserName>
<XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
</Scheduler>
4) Restart server.
Now login with the new password.

How to reset password for iomega storecentre ix2 without loosing my data

im having a problem in accessing the iomega storecentre ix2. i cannot login to the nas server. how can i reset the password without loosing my data on it. Is it avisable to reset it using the reset button without loosing my data?.
thanks!
AJ
Solved!
Go to Solution.

Hi altagumasi,
The pinhole reset button on the back panel of the device will reset user and network settings. It will not delete your data. Press the reset button for 15 seconds and the device should reboot. After the reboot, you will go through the initial configuration process.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

How do I use VPN for file sharing?

Hi folks, hope you can help.
I need to find a method for file sharing between my company's two offices, which are not only in different countries but also use both PCs and Macs. I think setting up a VPN is the way forward.
My file server is a Mac Mini running the standard client version of OS 10.5.4, with a static IP, 217.xxx.xxx.xxx. I need the PCs and Macs to access its resources. It is set up to share its files using FTP, AFP and SMB. It is running the application iVPN Server, which I understand is a GUI that makes the built-in OS X VPN Server function available to the client edition of OS X.
I am currently overseas and can connect to the Mac Mini over VPN. The problem is that I cannot seem to access the Mac Mini's files - I don't know what to do having established the VPN connection. I was half-expecting it to show up in the Finder under Shared or something.
The Mac Mini has a local IP of 10.0.1.20, but the VPN Server is issuing an IP to all clients in the range 192.168.2.200 and beyond. Is this where I'm going wrong?
Should the Mac Mini VPN Server also connect to itself, using VPN, as a client?
I'm really stuck, all help is very much appreciated. Thank you!

Thanks for prompt reply Topher..
I am familiar with the Connect to Server window, but I am not sure which IP I should be using. Assuming no VPN connection for the moment, and assuming I'm on a remote network, I can connect to the User's documents folder on the Mac Mini already by typing afp://[username:password]@[static WAN ip]/Documents
However, I need to ensure that SMB shares work (I know they work when I'm on the local network). So I type smb://[username:password]@[static WAN ip]/Documents but this fails to connect to the User's Documents folder.
To make the SMB shares work I think I have to connect using VPN. So I connect to the Mac Mini via VPN, and my laptop is issued a VPN IP of 192.168.2.200. Of course my laptop also has an IP from my local network. Do I need to rearrange my network order in System Preferences?
So I'm now connected via VPN. However to view the Mac Mini's files, surely it also needs to have an IP issued by the VPN Server? But the Mac Mini is the VPN server. So should I go into its System Preferences and set up a VPN connection to itself?
Now back on the laptop and I want to browse User's Documents folder on the Mac Mini using SMB. I go Connect to Server, and I guess I would type smb://[username:password]@[Mac Mini's VPN IP]/Documents
Am I on the right track? Thanks again...

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

MacBook air not connecting to iMac for file sharing

Hello, I have a 2012 MacBook Air running Mavericks.
I am trying to connect (for file sharing) to an iMac also running Mavericks.
File sharing is turned on on both computers. File sharing used to work fine before the upgrade to Mavericks.
Both computers are on the same network. I can ping the iMac from the Macbook. I see the iMac listed on the sidebar of my MacBook's Finder as a Shared drive.
Both computers have iCloud turned on.
However, when I click on the iMac in the Macbook's Filder sidebar, it shows up as "Connection Failed." I click on "Connect As" and nothing happens--no pop up window, nothing.
On the MacBook I am able to use Finder->Go->Connect to Server, enter my iMac's IP address and file sharing works (I can access the files). But when I go to some other local folder and come back to the iMac server, again I cannot see the files. Then I have again do Finder->Go->Connect to server, etc.
(On a different MacBook Pro on the same network I had the same problem, but when I clicked on "Connect As" it asked me to choose a user id and password, and I was able to connect using my Apple ID. However on the MacBook Air I am unable to click on "Connect As.")
Any suggestions on how to fix this will be very much appreciated.
Best,
ADD in HK

Sorry for the delayed update. This is issue is resolved by configuring my router to operate on Channel 11.
Looks like my router could operate on Channels above 11 like 12, 13, etc, whereas Macbook Air could recognise only till Channel 11.
Once the router was configured to use only Channel 11, my issue got resolved.

How do I set up file sharing to keep my Quicken and Aperture files accessible and in synch across my network?

I have a gigabyte ethernet network connecting my home and workshop. I have an iMac (mid-2009 and late-2012) at each location running Mountain Lion and Windows 7 Home Premium under Parallels 8. I want to be able to access my Quicken (for Windows), Office (for Mac) and photo (Aperture and iPhoto for Mac) files from either location and keep the files in synch. How do I set up File Sharing to accomplish this and what process should I use when updating and saving changes?

Use SugarSync.

Dynamic UserID/Password for file Adapter

Hi,
How to use dynamic UserId/Password for file adapter ?
(Sender/Receiver)
In our case the Id/Pwd of FTP Site changes freguently.
Can anyone help.
Thanks in Advance
Regards
Chemmanz

Hi Chemmanz,
>>>>In our case the Id/Pwd of FTP Site changes freguently.
but do you have those passwords in the message payload?
if not then you will still have to fill it somewhere right?
BTW
the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
but this is not possible in standard I believe
Regards,
michal

HT4352 I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it? What's up with that???

I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it? What's up with that???

I have the exact same issue. I also tried resetting my password. I can log in to iTunes on my laptop with the new password, on to my iPhone iTunes, but my Apple TV says it cannot recognize my password. I just did an Apple Tv software update a few days ago.
I am able to log in to Netflix on my Apple TV just fine. I did not have to re-enter my password for that.
Very frustrating. I hope Apple can figure this out soon and post a fix.
Thanks for any advice. Cheers.

How to reset password for file sharing?

Similar Messages

Maybe you are looking for