How to Reset "Published" Name in Captivate 5

Captivate 5 seems to cling to project title names, and I can't figure out how to reset them. For example, I have a file named Section_OrderEntry.cptx. When I go to File > Publish and the Publish dialog opens, the default Project Title it gives me is: Adding User_demo. I believe the name and the "_demo" extension are a result of the file originally being created and saved when my Captivate was in its 30 trial. I've since purchased the eLearning Suite.
Any ideas on where I can reset the default Project Title? I want it to be the same as the file name. Thanks!

I've seen this behaviour at times as well. What I usually do to fix it is:
Open the project file in Captivate 5.
Save As a new file name in a different directory on your PC somewhere.
Open the Publish dialog and set the Title to what you want.
Publish to the same target directory as the original file was publishing to.
Save As again, but this time save the file back to the same file name and directory where you started.
Check the Publish dialog Title field now. Is it what you want this time?

Similar Messages

How to exit published .exe in Captivate 5.5

I have published a .exe of a project in Captivate 5.5 in fullscreen. I want it to loop (which I set up) but also have the ability to escape/exit when done to return to the desktop. I can't figure out the keyboard shortcut to terminate the .exe when running and resorted to ending from the task manager, which screwed up my desktop. Any guidance? Thanks!

There are at least a couple of ways to do this. If you're using a playbar, open the Skin Editor, Playback Control tab, and select the Close checkbox. This will add an "X" to the playbar, which the user can use to close the lesson at any time.
Another way would be to add a button to the last slide and create and assign an Advanced Action to it.
The Advanced Action would look like this:
Then add a button on the last slide that calls that advanced action, like this:
Hope this helps.

How do you publish as an MP4 in a H.264 format using Captivate 6?

How do you publish as an MP4 in a H.264 format using Captivate 6?

As a temporary workaround, this is my work flow:
I create a 'crosshair' in the exact location, using two line shapes that can be positioned exactly using the Transform accordion.
The motion path end points have a circle that you'll have to drag over the crosshair. Motion paths use the center point of an object, contrary to resizing, moving that is from the upper left corner of the bounding box. I used the described work flow in the first movie here: http://blog.lilybiri.com/reset-effects
Lilybiri

How to Reset the EIM \ CIM System "sa" Password Procedure

All.
I have posted a document, "How to Reset the EIM \ CIM System "sa" Password Procedure" on this CSC site to assist you w\ the EIM "sa"user password reset procedure.
I am also posting the procedure and word document attachment here.
Let me know how helpful the procedure is.
Bernard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Resetting The CIM \ EIM System “sa” Password Procedure
Key: ‘ ‘ = Two single quotes.
The following contain the query for blanking out the SA password for Partition 0 thru the backend.
1. Go to SQL Server Management Studio and change the database to master database. USE “eGMasterDB”
2. a. To verify user_name, and select user_id“save the results for backup.
b. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
Note: Be sure to save query and results, so that it can be provided for troubleshooting, if there is a problem.
3. a. For Blanking out the SA password. UPDATE egpl_user WITH (ROWLOCK) SET password = ‘ ‘, case_insensitive_password = ‘ ‘ WHERE user_id = 1
4. Verify the PW columns are now clear, by re-running the select cmd. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
Then to successfully access and change CIM \ EIM “sa” User Account. (Partition 0)
4. Go to login. //<EIM server ip address>/system/
5. Login with “sa” as the user name, no password.
6. Navigate to Administration > Partition: System > Users, and highlight sa user under “List: Users”.
7. Highlight the “Password” row, on the “General” tab, under “Properties: sa”.
8. Select the box to the right of row and it will ask if you want to change the password.
9. Select yes, enter new password.
10. Save.

It's great to have these types of procedures published on CSC! Thanks, Bernard!
-Paulo

How to reset Windows 7/Vista/XP/2000 password if you forgot or lost windows

How to reset Windows 7/Vista/XP/2000 password if you forgot or lost windows password
It is truly very often for us to meet the password problem, sometimes we would forgot windows password or lost windows password, and could not login windows system and make a big trouble. At this time, you would hope to find a way to reset and recover the forgotten password.
Actually, a lot of methods are available to recover or reset the Windows password. But most of them are designed for PC experts, not common PC users, those solutions are too complicated to get it work for us. And in this article, I will show you a professional software tool which could help you to reset forgotten windows password easily.
Total Windows Password Reset is powerful password recovery software to reset Windows admin
passwords for you to login Windows OS without reinstalling the OS when you forgot windows password or lost windows password. It could remove windows password and set the password to blank. Just boot from the program CD/DVD or USB flash drive, choose the account you wish to reset and all will be done. It is not a method to crack or bypass windows password, just remove or delete windows password and set it to blank so you could login windows to set new password.
Below is the guide of how to reset windows password with this software, only 3 steps are needed to reset windows 7/Vista/XP password:
Step 1: Download the setup file of Total Windows Password Reset on the official website:
http://www.resetwindowspassword.net/downloads/totalwpr.exe
And install it on another PC. Then you could startup the password recovery software to prepare the bootable disc.
Step 2: Burn the windows password recovery bootable CD/DVD or USB disc with the software.
Now, you may select “Burn DVD/CD Disc” or “Use USB Disc”. If you select first method, you need to have a blank CDR/DVDR disk, a COMBO or DVDRW drive on the PC. If you select to use USB disc, you just need to pay attention: This USB devices would be formatted, so you must make sure to back up all the data before use it. And the maximum capacity of the USB devices cannot exceed 2G.
Tips: We recommend you to use the DVD/CD method to do the windows password reset, because some computers may not support USB start-up.
Below is step by step to show you how to burn the CD/DVD
1. Launch Total Windows Password Reset main window, Click “Burn DVD/CD Disc” button.
2. In BurnCC’s main window, click “Browse” button and in the open window, locate the file “TWPR.iso” on your desktop, select it and click on Open to get back to the main window. Then, click “Start” button.
3 Your DVD drive should open and insert a blank CD-R or DVD-R disc into the drive and close it. Click “OK” button. Your CD will be burned in a few minutes.
Tips: if there is already a CD/DVD disc in the drive before run the software, the CD drive will open automatically . Please close it again. The process will be continuing.
Below is step by step to show you how to burn the USB drive
1 Insert a USB drive into a USB slot on your computer and run Total Windows Password Reset, Click “Use USB Disc” button.
2 Click“Step1”button. Then, Right-click on the usb_format.exe and choose “Run as Administrator”.
3 In USB Disk Storage Format window, set the file system to FAT, Check the Quick Format box, check the Create DOS Bootable Disk, Browse to the DOS_files folder on your Desktop, click OK & then Start.
4. Click OK on the following window and then close the USB format tool. Your USB drive now is formatted.
5. Click “Step2” button and open the USB drive with your computer. Then, copy the files from the USB_files folder and paste them directly to the USB drives main directory. 2 of the files may become hidden and you will not see them on the USB drive. This is okay. Your USB drive is now complete.
Step 3: Boot your PC with the burned CD/DVD or USB disc to reset windows password.
You need to insert the Created CD/DVD or USB drive into the optional drive of the locked computer and reboot it.
Tips: It your computer still boots from hard drive Windows OS, it's necessary for you to change your COMS or BIOS settings to make it boot from CD/DVD or USB drive. If you don’t know how to set it, you may visit the official website: http://www.resetwindowspassword.net or contact the computer manufacture.
The computer boots from CD/DVD or USB drive, then
1 The program will ask for the Windows OS hard drive volume. Enter the ID number of the hard drive volume that Windows is installed.
2 The program has detected all the user names of Windows and asks which user name password is to be removed. Enter the ID number for the User Name.
3 The program asks to confirm weather to remove the password or not. Enter "y" (yes) to confirm your action and "n" (no) to deny the action and hit "Enter".
4 The program asks whether to continue to remove passwords for other accounts. Enter "y" to continue and "n" to finish. Eject your USB from your computer first and press any key to restart the computer from Windows. Now you can log in Windows with an empty password (with no password.), just click “Enter” when you login.
If you have any questions of the procedure and the settings, you could visit the website:http://www.resetwindowspassword.net or send email to [email protected].
Now you could see that to reset or recover the admin login password of windows OS: XP, Vista, Windows 7 or 2000 is not so difficult and you can do it with ease.

Very interest posting. Thank you for this detailed description and useful links.
If you have more interesting stuff to share with us you are welcome.

HOW CAN I Publish ALL the Original Different Colors in iCal

I am trying to publish a grouped calendar which includes several differently colored events. I am testing it by subscribing to it from an iCal that has no calendars created at all....and it still will not publish the different colors of the original calendar. All the events appear as one color.
How can I publish/share my calendar and have ALL the different colors show?
-I am publishing using a .Mac account.
THANKS VERY MUCH for any help anyone can give! It will be hugely appreciated.

I am having this same trouble - I publish
webcal://ical.mac.com/neyt/neyt.ics
as a grouped calendar. I tried resetting my sync data fromthe computer that this calendar lives on ( OSX 10.4 because I realized earlier versions have Ical that doesn't even group..)
Now when I have a subscriber pull down the .ics file, it doesn't show up as grouped, nor do the groups live onthe website version.
why don't these groups just show up? if I send people the .ics file - it all works just fine...
I know that some colors might be in use on other computers, I'm sure that other colors will be assigned s individuals need them in their calendars, but the groupings should sync...
help!!
flipster for G.Stockman

How can I publish a project so that the link to embedded flv is not lost?

When publishing an Adobe Captivate 3 project, the embedded flv file does not play.
How can I publish a project so that the link to embedded flv is not lost?

I am not really sure, if I understand you right. But try this:
Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
(Don’t click onto the color swatch, but onto the blue link "Fill".)
In this case responsivness should work.

How to Reset Windows 8 Admin Password without Disk

Problem:Forgot Windows 8 admin password and no reset disk available, how can I reset Windows 8 admin password? On the occasion, how to reset password on Windows 8 seems to be our problematic issue. However, the problem looks difficult, not difficult actually. Two factors make efforts on it. One is the new characteristics of Windows 8 system, the other is software technology development. So just let me help you to solve it. Just choose one and put it into practice:1. Get User password via Windows Password Hint.2. Get into computer with PIN code, and reset password for locked account.3. Login windows 8 Via Microsoft MSN Account.4. Reset Windows password with another available admin account.5. Reset Windows 8 password with iSunshare password tool. These methods will be introduced in details for people who have encountered or are facing this problem. 1. Get Administrator password via Windows Password HintWhen we are creating our Windows system account and login password, a password hint will be asked to set up for preparation. This password hint had better can remind you, only just you of lost or forgotten password. So it couldn’t like the password, but is related to your login password. As a result, while you type a wrong password, the password hint will pops up below the password input box. Based on the password hint, you can think of your origin password.  As seen above, my password hint is email [email protected], and my Windows 8 login password is the same as the password of email. So when the password hint pops up, I will think of Windows login password instantly. 2. Get into computer with PIN code, and reset password for locked accountPIN code is a quick, convenient way to sign in to this PC by using a 4-digit code. If you have ever created one, this may be the most simplest and effective method for Windows 8 password reset. Totally two steps are needed. Step 1: Sign in with PIN code
When you forgot your local account password in the login page, sign-in options is provided for you to choose. Click the Sign-in options, there are two options, Password and PIN. Choose PIN, and input 4-digit code in the box. Then you can sign in to your computer successfully. Step 2: Press Windows +X, and click on Command Prompt (Admin) and Yes. Step 3: On the Command Prompt, type in: Net User <user name> <new password> and press Enter to reset a new password for Windows 8.  Command Prompt screen appears, input the words like the words in the red box, user name is iSunshare, new password is 12345, and then press Enter to complete the Windows password reset process.  3. Login windows 8 Via Microsoft MSN AccountIf your computer has set up to sign in to Windows 8 with Microsoft account, and you can login Windows with it, and create a PIN that any user who has a password must enter it when waking this PC, and then login with PIN code, reset password with Command Prompt. 4. Reset Windows 8 Password with Another available Admin AccountIf there is another admin account available, log on to Windows with this account first, and then reset other accounts passwords would be easy.
>> Enter Computer Management screen
Click My Computer to select Manage to enter this screen
>> Set password for account you want to reset
Click Local Users and Groups, choose Users, and right-click the account you want to reset its password to choose Set Password. 5. Reset Windows 8 password with iSunshare password toolWhen you have no password reset disk, the first and most important effort of Windows password recovery advanced tool is to create a password reset disk. How to reset Windows 8 forgotten password step by step by iSunshare Windows Genius Advanced? Follow the below steps.Step 1: Download iSunshare Windows password recovery advanced tool from iSunshare official website. Install and launch it on an accessible computer.Step 2: Create a password reset disk
Insert writable USB or CD/DVD into accessible computer and select correct media type, and then click Begin burning to burn the removable device. Until the message “Successfully burning” pops up, it means password reset disk has been created completely.
Step 3: Boot from USB or CD/DVD Setup
>> Insert the removable device to your locked computer
>> Boot your locked computer, and press DEL or F2 at the same time to enter BIOS setting screen
>> Reset removable device as the first boot device under Boot option
>> Windows password reset screen appears after all the above settingsStep 4: Reset Windows 8 forgotten password
After all the above settings, Windows password reset screen appears.
>> Select the Windows system type and the account you want to reset its password. Or you can add a new account for Windows 8.
>> Click “Reboot” to restart your computer, then you could login Windows 8 without password successfully.   Source: Reset Windows 8 Password without Disk

A few days ago, I had met the headache things that I had forgotten Windows 8 password. The login screen rejected my passwords. I was frustrated because there was very important data on my disk and I couldn’t reinstall the OS. ………….
I fortunately got to know the PCUnlocker program, which is a professional windows password recovery tool for us to reset windows 8 password instantly yet no data loss.

How to reset sites in Safari asked not to auto fill

Good day,
First off, I don't really post here so it is just appropriate to say that I love Apple and I totally love Mac OS X. I've seen the operating system evolve since Tiger about 8+ years ago when I bought my first Macbook Pro and I'm on my 3rd one now. Well done to Apple with the latest Mac OS X Mavericks, it's fantastic.
I used to ask Safari not to autofill on certain sites in the past. I can't remember why exactly but I figure it was because the autofill and keychain didn't work as I expected or wanted it to work so it caused problems. I've also used 1Password all the time so I could've pressed "Never Save..." for the sites I regularly use to prevent the double-dialog.
Now, with the latest iCloud Keychain, it works much better and there are some sites where I want to use it but previously asked not to prefill on those sites and can't figure out how to reset them so that they will ask and autofill again like other sites. With the iCloud Keychain, it is almost good enough to ditch 1Password. It works really well, I love it, especially since I can do so much more with my iPhone now which I didn't do before since I don't know all my logins off by memory.
So, ultimately, how to reset the list of sites I've asked Safari not to save and autofill usernames/passwords on?
I've tried the "Allow autofill even for websites that request passwords not to be saved" but that doesn't work.
Some sites simply don't ask and simply don't autofill at all.
I've searched the internet and checked all the settings but I cannot find a solution.
I hope it makes sense and I hope that someone can help me to figure it out please.
All the best

From the Safari menu bar, select
Safari ▹ Preferences ▹ AutoFill ▹ User names and passwords ▹ Edit...
Find the site and delete the entry from the list.

How to reset the iPad - the Location Services doesn't seem to work?

How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???

Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

Need Directions on how to reset everything for a WRT 54g !!!

I forgot password that I used in 2003 and followed computer's advice from tech support 800# on how to reset 54g. Now I'm looking for some dierection on how to change everything out of FACTORY default to my own info. From how to change domain name and password to setting up router for use with only a desktop and laptop. Basically everything dealing with the security of my system and the outside world. Not very computer smart but not a total idiot. Thanks Tyler D.

Hi, There are no settings on router, that are needed/can be done, for computers, printer to see each other. They will be automatically able to see each other, if you configure file and printer sharing on computers properly. And also the firewall settings on computer properly.

How do I embed fonts into Captivate projects?

This question came up in May 2006 but was never really
answered. I'd like to know how to embed fonts into my Captivate
projects so that the output looks the same on all computers. While
the text animations are fine, the Text Caption fields are the ones
that seem to have fonts that go walkies on other computers. I know
you can embed fonts in PDFs. Why not in Captivate (unless I'm
missing something in 2.0).

First, a tip for the forums: If you use the URL tags, your
post won't require horizontal scrolling - sorry, but I use Firefox
and entering a long URL totally blows my ability to smoothly read
the post ... you can manually add a text link by using the "L" tag
as shown below (I've put spaces in to avoid this being turned into
another text link)
[ L = Your Text]
http://www.yourdomain.com [ /
L ]
Back to your issue, Charinos. I'm glad you did find the URL,
but that thread and your problem are not even in the same world.
That thread deals with fonts in text-entry boxes (boxes for
end-user text-entry), and you are talking about text-captions, an
entirely different object.
In fact, if you make changes and save those changes to a
text-caption, then publish the project, the fonts in your text
captions will remain stable and are not dependent on the fonts
installed on the end-viewer's machine. The reason is that when the
SWF is compiled, the text captions are converted to images and so
long as the file is viewed as intended in the HTML document - at
the proper size - the stretching you describe cannot take place.
I'm not saying you are seeing things, but if my understandings of
the Captivate machine are correct, what you are saying is happening
cannot
be happening. Something else is going on, like a failure to
save changes, use of non-conforming text-caption boxes with a
resultant loss of margins, or something.
Sorry I'm not more help. I can't duplicate what you are
seeing but I hope someone else can help you out - I may still be
misunderstanding your issue.

How to reset fileds on a jsp page

In my struts application ....after submittin it leads to the same page...
fields that were populated should be reset ,once it gets back to the same page...but its not getting so...
can any body help?how to reset the fields

in your struts config should look like this:
<forward name="costumer" path="/customers.do" redirect="true"/>

How to reset the response status and response header

Dear Masters
Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
Regards
Ramesh

Hi,
I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
http://dev2dev.bea.com/pub/a/2005/05/decorators.html
http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
Cheers,
vidyut

Resetting user name and password encrypted in printer memory

How do I reset my HP printer 8600 N911 series name and password? I have no record in my passwords file that I ever had to set up a name and password, and now I can not use my network folder set-up without one. Thanks.

Hi,
Reset the printer may help you to clear the old password and set a new one. Please use the following instructions:
http://resetprinters.com/how-to-reset-the-hp-officejet-pro-8600-premium-all-in-one-printer/
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Reset "Published" Name in Captivate 5

Similar Messages

Maybe you are looking for