How to reset restriction passcode for Ipad2

I forgot my restriction passcode, pls help

You will need to Restore the iPad using the computer it usually Syncs with...
Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Ipad User Guide

Similar Messages

  • How to reset restriction passcode on iPod touch

    Please I need to Know how to reset restriction passcode on iPod touch so I can sell it

    If you forgot the Restrictions passdoce:
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
    How to reset forgotten Restrictions...: Apple Support Communities
    However, since you are selling I woud erase the iPod by go to Settings>General>Reset>Erase all content and settings.

  • How to reset restrictions Passcode if it is forgotten?

    How do you reset your Restrictions Passcode if you have forgotten it?

    Recover Restrictions Passcode.
    If You Are Locked Out, Have Forgotten Your Passcode, or Just Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore or have forgotten your restrictions passcode, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • How to Reset Restriction Passcode

    We gave our son an ipod mini for Christmas. After we had downloaded all the apps we wanted, I disabled the app store and safari. Unfortunately, I have forgotten the restriction passcode. Any suggestions on resetting it?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT4623 how to reset restriction passcode

    i forgot my restriction passcode. so i want to reset my restriction passcode

    It can only be reset (removed) by saving as much data on your phone as possible, the restoring your phone as a new iPhone without using your backup and starting over.

  • How To Reset Restriction Password For iPod Touch 4G?

    I need help because i forgot my passcode for restriction

    absolutely correct. in doing this you will lose all data, everything. That is the only way.

  • How to reset restrictions passcode

    I forgot the restricted pass code Is there any way o restore it without erasing all information from ad

    iPhone, iPad, iPod touch- Turning off and on (restarting) and resetting
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • HT201304 How to reset my passcode for my iphone 5???

    I forgot pascode of Iphone 5

    Hi there Divine1567,
    I would recommend taking a look at the article below.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    -Griff W.

  • My ipad2 is disabled and my power button is not working, how to reset the passcode?

    My ipad2 is disabled and my power button is not working, how to reset the passcode?

    Hi, there is no fix for this unfortunately. However you can plug your iPad into iTunes and providing you have made a backup, you can restore from it
    you say its disabled, what does the message on the screen say?

  • HT1438 how do i reset my passcode for my iphone

    how do i reset my passcode for my iphone

    Hello kenburrell
    Go to Settings > General > Passcode Lock, it will ask for your current Passcode. Then you will see an option to change the Passcode. If you forgot your Passcode, the only option would be to restore your iPhone and then put the back up back on. When you restore, as long as the backup is not encrypted, it will not load the passcode back.
    iOS: Using passcodes
    http://support.apple.com/kb/HT4113
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    i forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    Try and force the iPad Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Reset restriction passcode

    reset restrictions passcode on iphone 4s

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.
    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Can anyone please tell me how to reset the passcode on an ipod touch?

    Can anyone please tell me how to reset the passcode on an Ipod Touch?

    Conect your iPod to yur computer and restore via iTunes. Place the iPod in recovery mode if necessary. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • How to reset restriction code?

    How to reset restriction code?

    Remove restriction passcode
    1. Restore to Factory Default
    http://support.apple.com/kb/HT1414
    2. You can restore from a backup that was done before you enable the Restriction Code.

  • HT1212 How to reset restrictions password?

    how to reset restrictions password?

    The following quotation is from iOS: Understanding Restrictions (parental controls) - Apple Support
    The link in the quote has instructions on how to perform the restore.
    Important: If you lose or forget your Restrictions passcode, you'll need to perform a factory restore to remove it.

Maybe you are looking for

  • Midpan is not mid pan after output and other minor problems...

    Ok, so I have this procjet I am working on. I have one sync with a man and one background audiotrack with a choir. In my headphones I hear a perfect midpan. The audiobar/VUmeters in FXPX shows exactly the same levels as eachother, since I have been u

  • Filter in search help

    Hi all, I have three fields in my selection screen from Infotype 0001. 1. Org unit ( OREGH) 2. Dept (OREGH) - custom field 3. Division (OREGH) -custom field When clicking F4 in the field Org unit it shows Orgunit with all details ( fine). And if i cl

  • Help on SSL and personal ID from verisign

    Hi All I need help setting up SSL on weblogic 6.1. This is the problem i am facing. I have an application that is running with in weblogic 6.1 and this application needs to talk to another system which is hosted externally and it as to use digital ce

  • How to Send SMS through XI (PI)

    Hi Can you explain how to communicate XI with a SMPP server (SMS Server)? I have a requirement to send notifications to the users through SMS. Do we have a separate Adapter to communicate with ? Please help on this. Thanks & Regards, Chaminda.

  • Crystal error 709

    Version 11 installed, Crystal error 709 Error in file C:\Program Files\Access Applications\Payroll\4.50a\Data\Access Reports\Records\EmployeeList.rpt The table could not be found Anyone help please?