How to reset the country back to ca in app store for ipad

I've tried to download a usa only application in app store, the system asked me if i wanted to switch my country to usa i've said yes, the program did not download and on top i can no longer update existing apps and i'm getting a:    Your account is not valid to use in usa store, you must switch to canadian store before purchasing....
There are no instructions on how to do it

Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

Similar Messages

  • I bought iWork on CD. How can I transfer them to reflect in my App Store for Mac?

    How can I transfer them to reflect in my App Store for Mac?

    I found the answer in an other discussion
    https://discussions.apple.com/thread/5469886
    you have to change the language of your mac, reboot your mac and it will be in the appstore. i have tried it too
    but it doesn't work for i life

  • I have buyed an app through debit card my money was deducted from the account again if i open app store for downlaoding any app it is asking me to submit my new accont

    i have buyed an app through debit card my money was deducted from the account again if i open app store for downlaoding any app it is asking me to submit my new accont for accessing

    You've been hitten by Apple's recent SNAFU. I fear you are SoL until their pending investigation fiasco is over with.

  • How do I change language back to English on App Store, How do I change language back to English on App Store

    SOmeone borrowed my iPad and changed the App Store to Italian, how do I change back to English ?  Everything else is in English .

    Check if you are using the right App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located.
    9. Tap "Done".

  • Deleted the email attached to old Apple Acc & forget password. Still registered to my iPod? How do I use a new Apple ID in App Store for my iPod?

    I have deleted the email address attached to my Apple ID. I know what the email address is but it is non-existant. I thought I remembered the password but apparently it is incorrect? When I go to the App Store on my iPod and click my account to try and sign out. It does nothing and the button is faded out. When I try to download a free app it asks for the password for the old account with a deleted email attached to it. How do I sign out of this account on my iPod so I can sign in to another Apple ID to download apps?

    - Go to settings>Store and sign out and sign into another account.
    NOTE:
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
    Try recovering access to your account by using the secret question methosd
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
    Then
    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.

  • How to remove the application which is downloaded from app store

    I have downloaded pocket pond application from app store. However I would like to remove it as I do not like it. Can you let me know how to remove the application?
    Regards
    AADK

    Press and hold the icon until it wiggles.  Press the x to delete the app.  Press the Home button when done.
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • My ipad2 is disabled and my power button is not working, how to reset the passcode?

    My ipad2 is disabled and my power button is not working, how to reset the passcode?

    Hi, there is no fix for this unfortunately. However you can plug your iPad into iTunes and providing you have made a backup, you can restore from it
    you say its disabled, what does the message on the screen say?

  • How to reset the data when the session lost?

    When I use response.sendRedirect("http://localhost:82/main.jsp")
    the session lost, because the URL before redirect is using SSL,
    "https://localhost:81/index.jsp", they use the different port,
    so the session lost, what should i do to prevent this? And how
    to reset the data?

    Create a HashMap and store it as an attribute of the servlet context. In the first servlet assign the user a key and store all session data in the HashMap under that key (use a vector, collection or user defined class).
    In the response.sendRedirect call add the key to the url:
    response.sendRedirect(url + "?key=" + userKey);
    In the second servlet get the key (request.getParameter("key")), retrieve the session data from the HashMap in the servletcontext and store in an httpsession.
    Remember to delete the entry from the HashMap so it doesn't become overly large.

  • Satellite L310-D4011: How to reset the DVD Region setting to 0?

    Dear All,
    I have a Satellite L310 D4011 machine which I recently purchased in which I installed a DVD player software.
    I run WinXP. A friend of mine played a music video from UK (Mccartney Live in Red Square) in the DVD player and the original region setting which was at 0 with 5 changes remaining, has gone to 4 changes remaining and the region is now set at 2. I am in India where the region for DVD is 5. If I change to 5, I lose another change option.
    I do not want to let my DVD ROM get stuck at 0 options left and in some other region.
    Can anyone give me an advice to reset the region back to Zero with five options remaining - the way it was when I bought the laptop?
    I shall be extremely grateful. Will the vendor from whom I purchased the laptop be able to set it back to factory setting?
    Best wishes

    Hello
    In my opinion Toshiba has nothing to do with it. To protect movie industry and their interests all notebook manufacturers offer optical disc drives where you can watch movies with different country code but 5 times only. The last chosen region code will be set as default. So if you have 4 more codes there is no reason for panic. Just continue to watch movies from your favourite region area.
    I am 100% sure that Toshiba service or vendor where you purchased your notebook will say that they have nothing to do with it. In drive properties you have clear statement how it works.
    Anyway you can try to contact them and ask for help.

  • HT4061 I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    Hi Myreiac,
    Here's what the Apple Support site says you can do if you do not have access to a computer when your device has been disabled:
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    You can access Find My iPhone via the Find My iPhone app on your iPad.
    Good luck!
    Cheers,
    GB

  • Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

    I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
    My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
    Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

    Hello damo1177,
    It should help to reset your system's SMC and NVRAM.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • How to reset the response status and response header

    Dear Masters
    Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
    Regards
    Ramesh

    Hi,
    I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
    http://dev2dev.bea.com/pub/a/2005/05/decorators.html
    http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
    http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
    Cheers,
    vidyut

  • How to reset the router?

    I tryed to secure the router with the easy-link program and i want to reset the whole thing.Also if anyone know how to reset the netowrk setup from the control panel that would be great too.

    What router are you using?
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: some routers have a user name of "admin" ), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • How to reset the calendar from myfaces?

    I want to realize a "logoff" feature on my main jsp page. And that page contains a calendar component.
    I simply "redirect" main page to the login page by return a string, however when I login again, the calendar is still like the one of the last login action. Eg: in first login action, I change the current month in the calendar to January, and then I log off. After next login, the month stays January, instead of the current month!
    I tried to reset the members of backing bean, it remains the same.
    I use the component calendar from myfaces, does anyone know how to solve this problem, or simply, how to reset the component calendar?
    Thanks!
    db

    let the thread die, i got it......

  • How to reset the wiki server (MAC OS X 10.9 with OS X Server App Version 3) with all wiki datas only

    Hi,
    I need to reset my Wiki on MAC OS X 10.9 with OS X Server App Version 3, but without reinstalling the whole server app to configure all services.
    Does anybody knows how to reset the wiki server (MAC OS X 10.9 with OS X Server App Version 3) with all wiki datas only.
    Thanks a lot for your hints

    Hi Linc,
    sorry, I haven't saved the System-Logfile before restoring my parallels VM.
    But it looks like issues of linking data.
    For testing the Server services I have done a reset for a user password and I have deleted the profiles and configuration from Client-Side. One with Mac OS X 10.9.1, one iPad with iOS 6.1.3. But it was not possible to reconfigure/reinstall the Server Profile. Also a manually configuration was odd, because for some services the new password was necessary and for other services the old password. Very strange.
    To bring back the services I have rolled back the last snapshot of my parallels VM. Afterwards there was no probleme to reconfigure/reinstall the Profile on Client-Side (OS X 10.9.1 and iOS 6.1.3). Also the manually configuration shows the password for all services are matching with the current configuration.
    I'm going to install a further parallels VM with Mac OS X 10.9.1 and Server App 3 from scratch to move the services.
    Greetings

Maybe you are looking for