How to reset the Reader Digital Book.

Solved!
Go to Solution.

There are two different types of reset procedures you can do on your Reader Digital Book - soft and hard.
Soft Reset
IMPORTANT: A soft reset can be performed anytime and will resolve most issues.
Locate the reset button access hole. It is labeled RESET and, depending on your model, can be found on the back or bottom of your Reader device.
PRS 500 NOTE: On the PRS-500 model, you must remove the soft cover to locate the rest button access hole.
Using a thin object such as a paper clip or stylus (included with touch models), press the RESET button.
The screen will not change after pressing the RESET button. You must now slide the POWER switch or press the POWER button (PRST1 only) to turn on the Reader device again.
Hard Reset
WARNING: There is a risk of data loss. After doing a hard reset, you will need to restore your content. Your purchased books can be restored from your account at the Reader store.
IMPORTANT:
You should only do a hard reset if necessary and as the last step for troubleshooting.
After you do a hard reset, your Reader device will need to be authorized again from your Reader store account.

Similar Messages

How to uninstall the Reader Digital Book USB drivers in the Windows operating system.

Solved!
Go to Solution.

Connect your Reader Digital Book to the computer.
Click Start and then click Control Panel.
In the Control Panel window, click System.
The next step will depend on your operating system:
Windows® XP operating system:
Click the Hardware Tab and then click the Device Manager button.
Windows Vista® and Windows® 7 operating system:
In the left pane, click Device Manager.
Click the plus sign in front of Universal Serial Bus controllers.
Click to select USB Mass Storage Device.
NOTE: If there is more than one USB Mass Storage Device in the list, you can determine which one is the Reader device by disconnecting and then reconnecting it from the computer. When you do this, make note of which device was removed and then added to the list.
On the menu, click Action and then click Uninstall.
In the Confirm Device Uninstall box, click OK.
Disconnect the Reader Digital Book from the computer.

How to charge the Reader Digital Book.

Solved!
Go to Solution.

Follow these guidelines when charging your Reader Digital Book:
If you charge via a USB connection and leave your Reader Digital Book connected to the computer to charge and the computer goes into sleep/hibernation, charging will stop and the red charge indicator on the Reader will turn off. If left connected, your battery may begin to discharge. To avoid this, turn off any sleep/hibernation settings while charging or set your sleep or hibernation settings to come on after your Reader Digital Book has been charged and then disconnect it from the computer once charging has completed.
If possible charge the Reader device using an AC Adapter (optional for some models). When using the AC adapter to charge your Reader device, depending on your model, you with either see a lightning bolt symbol that appears next to the battery icon [FIG. 1] or a battery icon with an arrow [FIG. 2] that appears in the lower-right corner of the display of your Reader device. This is an indication that it is connected to AC power and is charging the battery properly. If the symbol is not present, double check the AC Adapter to ensure that your Reader device is properly connected. This symbol does not appear while charging via a USB connection.
It will take approximately 4 hours to achieve a full charge with a computer. It will take approximately 2 hours to achieve a full charge with the optional AC Adapter.
If your Reader Digital Book is left connected to a powered USB hub while the computer is shut down, your battery may begin to discharge. Disconnect your Reader from the hub when the computer is not powered on.
Always verify that your Reader is fully charged by disconnecting it from the computer and checking the battery indicator. The battery indicator will display 4 black bars when it is fully charged
After charging your Reader device, if the Reader Library software is still open, you should use the eject button in the Reader Library software to safely eject your Reader device. If you already closed the Reader Library software, you should use the Safely Remove Hardware feature of the Windows® operating system.
NOTE: When storing the Reader for a long period of time, use the Device Shutdown feature in the Advanced settings menu. After using Device Shutdown, it may take approximately 30 seconds for the Reader to start the next time the Reader is turned on.

How to authorize a Reader Digital Book to a Reader (eBook) Store account.

Solved!
Go to Solution.

To transfer books from a computer to the Reader Digital Book, you must authorize the Reader Digital Book to your account. Authorization links your Reader to your eBook Store account, allowing books purchased from the eBook Store to be transferred to the authorized Reader. You can authorize up to six devices to a single account.
From your home computer and home network, do the following:
Launch the Reader (eBook) Library software.
Log into your eBook Store account.
Turn on the Reader Digital Book.
NOTE: For best results, we recommend that the Reader Digital Book be fully charged before starting the authorization process and authorized from your home computer and network. Work related computers and networks often have security measures preventing the authorization process.
Connect the Reader Digital Book to the computer.
In the eBook Store pane, click My account.
On the Account Management page, under My Authorized Devices, click Manage Devices.
On the Manage Device page, under We have detected the following attached Devices:, click the Authorize this device button.

How to safely disconnect the Reader Digital Book from the computer after using it with the Reader Library software.

Solved!
Go to Solution.

WARNING: The Reader device should never be ejected under the following conditions or permanent damage to the Reader device may occur:
NOTES:
A data transfer is in progress
Your computer is accessing the Reader device or compatible memory card inserted in the Reader device.
A file in the Reader device or a compatible memory card in the Reader device is open.
If you are not transferring any data and would like to disconnect your Reader device, click the eject button in the Reader (eBook) Library software. The message on your Reader device will now be USB connected and you can safely remove the connection or continue to charge.
NOTE: If you have already closed the Reader Library software, you can use the Safely Remove Hardware feature of the Windows® operating system to disconnect your Reader device from the computer.

How do I create a digital book that fits tablets and computer monitor sizes?

How do I create a digital book that fits tablets and computer monitor sizes?
Example: An 8.5 X 11, 2 column Word document with pictures, approximately 100 pages.
Must I also publish the book in a 5X8 format or does Acrobat have something that will do that for me?

Starting at the end:
- When the movie or tv show does transfer onto your iphone/ipod touch you will be able to see it in the expanded view of your device in the "DEVICES" section.
- If the files are not on your device, then:
-- confirm you have SD or HD-SD video. HD-only content will not play and probably will not even sync. iTunes seems to reliably have SD versions with their HD distributions so this should not be an issue
-- confirm you are synch-ing the content to the ipod device by browsing the DEVICE view's Movie or TV Show tabs to confirm the movie or episode is 'checked'
- If the files are on the iPod and you cannot find them, check your Settings: General for Restrictions. If you restrict, for example the movies to "G" rating. PG and higher movies will sync but you will not be able to find them on the iPod!

How to reset the iPad - the Location Services doesn't seem to work?

How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???

Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

My ipad2 is disabled and my power button is not working, how to reset the passcode?

My ipad2 is disabled and my power button is not working, how to reset the passcode?

Hi, there is no fix for this unfortunately. However you can plug your iPad into iTunes and providing you have made a backup, you can restore from it
you say its disabled, what does the message on the screen say?

How to reset the default window size

Hi!
I played around with the different layouts of Adobe Connect Pro and somehow got a real chaos of window sizes and window positions when changing the resolution as well. How can I reset the layout to the default layout settings (window size, window position, which window should appear)? At this moment I cannot move a windows because it's too big to move or resize it.
Is there a possibility to undo these changes?
Thank you!
Best regards,
Thomas

Does anyone know how to reset the meeting layout during a running meeting?

HT2101 I can't find the keyboard by using iMessage, but I can by using email or whatsapp? How I reset the keyboard on iMessage?

I can't find the keyboard by using iMessage, but I can by using email or whatsapp? How I reset the keyboard on iMessage?

Did you tap in the box at the bottom of iMessage?
If you did and no keyboard is showing: Do a reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If that didn't helped, double tap Home button, delete the Message app and reset again.

How to reset the router?

I tryed to secure the router with the easy-link program and i want to reset the whole thing.Also if anyone know how to reset the netowrk setup from the control panel that would be great too.

What router are you using?
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: some routers have a user name of "admin" ), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

HOw to reset the buffers

Hi Firends
When i am in T-code ST02 all buffers and swap space is overflow how to reset the buffers without restart the instance
Regards
Vishal

Hi!
Write the following string into your sap transaction field: /$sync
This will reset all buffers.
Regards
Tamá

How to reset the data when the session lost?

When I use response.sendRedirect("http://localhost:82/main.jsp")
the session lost, because the URL before redirect is using SSL,
"https://localhost:81/index.jsp", they use the different port,
so the session lost, what should i do to prevent this? And how
to reset the data?

Create a HashMap and store it as an attribute of the servlet context. In the first servlet assign the user a key and store all session data in the HashMap under that key (use a vector, collection or user defined class).
In the response.sendRedirect call add the key to the url:
response.sendRedirect(url + "?key=" + userKey);
In the second servlet get the key (request.getParameter("key")), retrieve the session data from the HashMap in the servletcontext and store in an httpsession.
Remember to delete the entry from the HashMap so it doesn't become overly large.

How to reset the calendar from myfaces?

I want to realize a "logoff" feature on my main jsp page. And that page contains a calendar component.
I simply "redirect" main page to the login page by return a string, however when I login again, the calendar is still like the one of the last login action. Eg: in first login action, I change the current month in the calendar to January, and then I log off. After next login, the month stays January, instead of the current month!
I tried to reset the members of backing bean, it remains the same.
I use the component calendar from myfaces, does anyone know how to solve this problem, or simply, how to reset the component calendar?
Thanks!
db

let the thread die, i got it......

I was rubbing my keys and screwed up my font setting. i don't know how to reset the font to original mozilla setting

i was rubbing my laptop keys. i must have hit the right key sequence to change the font setting. i don't know how to reset the font. i was in mozilla at the time, so only it was affected. IE still uses the correct webpage fonts. IE has a reset on their browser, does firefox?

Have you tried closing Firefox and visiting the site again without restoring your session? This will bypass any temporary changes.
If the problem is the font size, you can reset the zoom level:
View menu > Zoom > Reset
If you have the orange Firefox button, tap the Alt key or press F10 to display the classic menu bar where you will find the View menu.
If that doesn't help, can you describe what's different in more detail?

How to reset the Reader Digital Book.

Similar Messages

Maybe you are looking for