How to reset ur iphone when it does not want to start? Anyone thanks

Hi everyone, please help me on above question. Kind regards

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117238)

Similar Messages

How di I restore iPhone when iTunes does not recognize it?

I finally upgraded iOS for iPhone, but something went wrong, and now iTunes does not recognize the phone at all. I am guessing at some point the wireless network through which the upgrade was taking place failed.

iOS: Unable to update or restore

I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

TS1389 When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M.

My IPad just shut down and does not want to start again?

My IPad just shut down and does not want to start again....what can I do?

Assuming that the battery isn't empty (it can take up to 10 or 15 minutes charging before it responds) then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT1689 how can i undisable my ipod touch when itunes does not want to connect?

My brother's ipod touch 4th generation was cracked on the screen and was not able to see anything after a while. We finally fixed it and now it says "IPOD DISABLED CONNECT TO ITUNES". We tried connecting it and itunes does not want to connect because it says that the ipod has a passcode and until we unlock it, it will do it. So we our stuck and on top of that, the ipod's power button does not work, so we waited to uncharge the ipod so we can try to connect it again and it still won't do it. We do not know what to do, and we cannot afford to buy a new one. Is there a solutiong for this? Thank You.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Macbook pro does not want to start up

Hi! I am having issues with my MacBook Pro. What's happening is that when I turn it on it does not want to load anything. I push the power button and the apple logo comes up and the little loading symbol at the bottom just keeps going around and around. I've left it on for about an hour straight to see if it finally loads or if anything happens and still I get no where. Has anyone had this issue before and if so, how was it resolved? I don't have the extend warranty from apple, so they're charging my $20 right off the back to use over the phone service. I have no problem paying for it, just rather see if there is a simple free way to get it fix instead of having to pay just to talk to someone over the phone. I also can't remember what operating system I am running on. PLEASE HELP!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

My CQ61-313US Notebook does not want to start up sometimes.

My notebook all of a sudden does not want to boot up properly. When I turn it on the power light comes on, the wireless icon stays red, and two lights flash on and off. One is located next to the caps lock button and the other is located above the end and page up buttons. I take out the battery and unplug the power cord, then hold down the power button for up to 30 seconds. Then I plug the power cord back in and try to restart it. I do this over and over again and if I get lucky it will boot up. What do you think is the problem here? Thanks in advance for any help anyone can give me.

"I really do not want to post a new question if someone who has helped may know an answer."
MGW, has provided the best answer for you:
+"but you should contact Apple since you are within the 90 day warranty period and the power supply might have been damaged in the repair."+
Check out the following for the closest AASP in your location:
AASP
AASP's Outside of the USA
================
http://docs.info.apple.com/article.html?artnum=304398 How to find your nearest Apple Authorized Service Provider (AASP)
Good luck!

How can play Itune song when authoriaztion does not work?

after sharing Itune file, how can I play song when computer authorization process does not work?

Hi dewhi,
You can use the Adobe Cleaner Tool to uninstall CS6.
You can download the cleaner from : http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

HT1430 if i've tried to reset the iphone and it does not work, what should i do

I've tried to reset my 3GS iphone and it's does not work. My son as lock-out the phone and i cannot go into it again

Needs to do recover mode
Forgot Passcode use recovery mode to restore
http://support.apple.com/kb/HT1808

How to determine Hardware version when Sticker does not (seemingly) show Hardware Version ???

Hi,
I currently have a Cisco RV042, I MAY be blind, but I can not see the Hardware version mentioned on the sticker at all. The router was manufactured 06/2012 and was shipped with Firmware rev: 4.1.1.01. The Hardware version does not appear next to the clearly indicated Model number.
Can the router contain Firmware 4.1.1.01, yet still not be a V03 hardware? OR - does the vary fact that it HAS 4.1.1.01 firmware mean it has V03 hardware?
I am having DNS reliability issues, and need to reset the router every couple hours to fix it. I want to update the firmware, but don't want to wreck it by putting in Firmware not meant for it.
any help would be appreciated.

Hi Gkhanna,
thanks for the detailed feedback. Map update needs to be done by a component we are using. It is in the backlog, for now as you noticed it is not in.
Regarding item 1:
This is an OS question. In WP7.5 we cannot do this.
Regarding item 2:
Will be forwarded to Maps app team. Might alos be a question of OS.
Regarding item 3:
in work right now.
Regarding item 4:
In work, but synchronization will come in later releases. We have some OS and platform issues here to solve.
Regarding item 5:
in the backlog
Regarding item 6:
all routing algorithms bring only routes which are accepted to be good by 28% of the users. In certain cases we are better, in others Google, in other Bing in other Navigon, in other Garmin. We are continuously improving, but you will never get this "perfect" for every user. Currently we are globally on par. Improving is ongoing.
Regarding item 7:
in the backlog.
regards,
André
Moderator's note; removed comment on unannounced or unofficial features.

IPAD does not want to start

I have a problem iPad is iPad 2 3G w/16gb,
it is 4 years old. sustained no damage at all, worked fine up to a few days ago when it didn't wake up, did the reset with the home button and the power on/of one, it worked, then after i left it alone again it wouldn't wake up.
tried to reset again, didn't work, made sure its charged. reset again, eventually worked. I restored the product with new installation of iOS via iTunes. it worked for a day, then wouldn't wake up. rest worked again, device worked fine for a day. yesterday device wouldn't wake. reset doesn't work, was charged overnight, still doesn't work.
Attempt to put in recovery mode, not responding, iTunes does not recognize the device when plugged in with or without home button being pressed.
I have a strange note, this problem happened once before 1 year ago at almost the same time and it fixed alone , and I can find someone on community had the same problem on Jan 2014 , and Apple replaced the IPAD fro him, so is there any chance this problem related to the very cold weather, does cold weather can affect CPU or battery by any means ?
Thanks & BR
Moamen

It depends on what you consider very cold weather. iPad 2 environmental requirements
iPad 2 - Technical Specifications
Environmental Requirements
Operating ambient temperature: 32° to 95° F (0° to 35° C)
Nonoperating temperature: -4° to 113° F (-20° to 45° C)
Relative humidity: 5% to 95% noncondensing

Imac does not want to start up

Hi,
I have just had my logic board replaced by Apple(thanks apple) and have been happy to have my imac back. This morning it did not boot up and stopped on the dreaded blue screen, I look up in these forums for some help and took the advice of Miriam and reset the SMU and hey presto it worked, I cried. Then today the power in the town I live in went off and when it was restored the same thing happened it did not restart. I really do not want to go through the resetting process every time I want to use the computer and so am looking for the necessary guidance from those more knowledgeable than myself.
Thanks

"I really do not want to post a new question if someone who has helped may know an answer."
MGW, has provided the best answer for you:
+"but you should contact Apple since you are within the 90 day warranty period and the power supply might have been damaged in the repair."+
Check out the following for the closest AASP in your location:
AASP
AASP's Outside of the USA
================
http://docs.info.apple.com/article.html?artnum=304398 How to find your nearest Apple Authorized Service Provider (AASP)
Good luck!

MySatellite A100 does not want to start

Well, here is the problem:
Today, I wanted to start up my PC as usual. I entered my user-name and my password as usual and then appeared the usual message "Welcome".
But then, it remained blocked at that message. The entire screen remained blocked.
I restarted my PC and chose the "Safe-Mode", it worked AS USUAL, but then when it restarted automatically the same problem appeared.
I tried again for several times, but now I meet the same problem with the safe mode!
I can do anything! Despite having the formulae for User Name and Password, Ive a black screen with only the cursor and it remains like that...
Please help me! I'm afraid that I'll need to reboot the system but I do not want to lose my data, my memories, all things...
Is there a solution? It's A Pity! I can afford it.
Please Help!

I think you might need to reinstall your operating system, but you might try copying your data first using another computer. An external drive caddy will let you hook your hard drive up to another computer so you can copy your files off.
Another option is to buy an external hard drive caddy and another hard drive for your computer, reinstall your operating system, and then get your old files back using the external hard drive caddy.
If you're familiar with using Linux, you might try booting from a newer Knoppix Live CD. Then, open a Terminal, become root, make a directory and mount your main hard drive partition to that, go into that directory and make another directory called "backup", move all of the other directories and files into the "backup" directory, then unmount the hard drive. Reinstall the operating system, but make absolutely sure that you do NOT delete, move, change, create, or format any partitions. This is the process I usually use, but if you don't know how to do it, then it's easy to make a mistake and lose all of your data.

Blackberry 8520 does not want to start after installing FB app

Good morning.
I installed my Facebook app found on the application world on the phone last ight. After it sucsesfully installed the phone asked me to reboot. By doing so the phone went of, But does not come on agian. The red light flashes ans flashes and....... ya.... Anyway, then it goes on and of and on and of............ Hoe can i fix this??????
I only had the phone for a couple of hours, after Vodacom gave me 1 back, because my prevoiuse one kept on taking green photos. That one i only had a week..... sooooo i waited 3 weeks for the other one to arrive, and now this... is it just a BALCKBERRY RED CURVE giving this problems or what. Non of my friends has a red, and theirs are working PREFECT. 2nd unit had a sticker at the back - " REFURBISHED UNIT"
Please let me know if this is a commen issue so that i can cancel this contract and get another colour, or if its just my bad luck .
Oh, and in your time zone you did not have South africa... we are GMT + 2.00
Regards
Leoumé

Hey leoume,
Welcome to the forums.
This sounds like a software issue. Try following the instructions in this article to reload your software when the device is not detected. http://bbry.lv/lrnBzB
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to reset ur iphone when it does not want to start? Anyone thanks

Similar Messages

Maybe you are looking for