How to: Resize a rows height in a table using acrobat 9 pro?
I'm working on a government grant, with many tables that need to be resized in order to fit the required information. Can anyone help me?
PDF isn't a word processor like file format -- so, a "rebuild edit" to a table is a "You Don't".
As to form fields, Acrobat provides one with the ability to edit Acrobat form fields (if the form / file is not protected).
But, changing a grant form is likely to result in its being rejected by the originating organization.
Basically, you want to speak with the organization that you will submit the form to.
It may well be that you are trying to put 2 tons in the 1 ton pickup (less might be ok & actually expected).
Or, it may be that, unknown to the organization, the PDF form is hosed.
If so, communicating with the organization may well be a good thing.
Be well...
Similar Messages
-
How to increase the row height of the table in the smartform
Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish -
How to check the resolution of a pdf file using Acrobat 9 pro?
How to check the resolution of a pdf file using Acrobat 9 pro?
PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.
-
How to get selected row values in a table using check box
Hi ADF Experts,
JDEV Version 11.1.1.7.0
My requirement is getting the selected row valuesof a af:table using a checkbox(multi select).
Thanks,
AnimeshHi,
add a transient attribute to the POJO entity and update this through a check box. The ensure you have autosubmit=true set on the check box. In a value change listener set or remove the row's checbox attribute value
Frank -
How do I create a check-box matrix question using Acrobat XI Pro?
I would like to insert a question that is a 10 x 10 matrix that allows respondents to select multiple boxes in each row. For example, the "add item > rating scale" feature formats a matrix the way I would like, although it only seems to allow for radio buttons. With this feature, respondents can only select one item per row. Is there any way to use this feature with check-boxes rather than radio buttons? Or a different feature to create a matrix that allows for multiple selections per row?
Thanks so much,
AndyI created a 30 page Form in Microsoft Word with 20 to 30 check boxes on each page using the Zapf Dingbats Font.
When I used Acrobat XI Pro to automatically convert the form it fails to create usable check boxes.
It worked properly about 3 times on test pages but it will not do it again.
Manually inserting check boxes one by one on 30 pages is mind numbing to say the least.
Why doesn't the software work properly anymore? -
After loading Acrobat 9 Pro on my desktop PC (Windows 8.1; 64-bit OS), opening and closing a previously saved pdf file, I constantly get a message pop-up that indicates a "database organizer" error.
How do I fix this?
I have read multiple responses at various forums and they do not seem to apply, or have not worked for others, with regard to the details of my version of Acrobat and Windows OS.
I'm beginning to think that the only solution is to purchase the latest version of Acrobat Pro and install it on my PC, which, of course, I would prefer not to do, unless this is my only viable option.
Can this problem, specific to my version of Acrobat and Windows OS, be fixed or is the simple answer: purchase the latest version of Acrobat Pro, because there is no fix for my version of Acrobat/Windows OS?
Any help would be greatly appreciated.
FHWHi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra -
How can I embed metadata in a pdf file using Acrobat XI Pro?
Hi, everyone!
I need some info how I can put things like key words, description of the file and the like permanently in the file to let it 'travel' in the file everywhere, no matter what the OS is. I guess I should use Properties 'path' but it resembles Windows system properties, so I'm not sure. Moreover, there's so little about it in manuals....
Once I've done with it, can it be read just by Adobe Reader?
And one important thing more: is there any inner search engine inside Acrobat XI to search the files by key words and other similar metadata criteria or I'm solely dependant on the OS search function?Thanks for the link - it sounds highly specialised, but simple experiments of opening a Properties Windows and putting some description notes and author or key word is readable by Acrobat reader or the system search engine so maybe it's not really complicated - mind you, I don't mean right-clicking on the file where options are poor and probably thode of the OS but Preferences edition after opening the document in Acrobat XI Pro - I hope this one is of Adobe and maybe I won't need Bridge to read it I know in the suggested thread it's a problem of graphics metadata within the pdf file....
-
How to delete the row from the ADF table using popup box
Hi,
I have one requirement like need to delete a record from the table, but that time need to show one popup window for confirmation of the deletion. I am using Delete buttom from the vo operations. I am able to delete the row with out popup but when i used the popup that time deletion is not happening.
Can any one help me in this.
Regards,Issue was resolved.
-
Hi All,
Is it possible to reduce the row height of a table.Actually the font is small and the row height is more.I dont want to redcuse the width only row height.
Regards,
Amritdoes anyone of u havea ny idea on how to achiieve this.
-
How to get selected row index of a Table ?
hi gurus,I'm new to Webdynpro for abap
I'm displaying just Flight details in a Table so
how to get selected row index of a Table and need to be display in Message manager.Hi,
For getting the row index use the following code.
DATA lo_nd_node TYPE REF TO if_wd_context_node.
DATA lo_el_node TYPE REF TO if_wd_context_element.
DATA index TYPE i.
* navigate from <CONTEXT> to <NODE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
lo_el_node = lo_nd_node->get_lead_selection( ).
index = lo_el_node->get_index( ).
node is the name of the node which is binded to the table.
For printing the message u can use code wizard.
Press ctrl-F7. Now Select generate message.
IN this select the method REPORT_SUCCESS
In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
Write the whole code in onLeadSelect of the table.
Regards,
Pankaj Aggarwal -
How do I add a negative to a calculation in Acrobat 10 Pro?
How do I add a negative to a calculation in Acrobat 10 Pro?
I am using Acrobat 10 Pro in Windows 7.
I have a form with columns of numbers (Millions, Thousands, hundreds) that I concatenate and then perform simple calculations on (addition, subtraction, division, etc).
I have a new section of the form that has a column for a negative sign. The calculation is simple addition but it is possible for the numbers to be negative as symbolized by the minus sign in the negative column:
Line 23 adds lines 20 + 21 + 22 and displays the sum. If any of lines 20-22 have the minus sign in the Neg column, I need the calculation to see that and add the negative number, essentially subtracting it.
NOTE: the neg column is so formatted that the only possible entries are null and "-"
So, I see two ways to go, one is a script for each line that looks at the neg column and if the "-" is present, makes the entry a negative number. I have not had much luck with this.
The other path is to do this all in the calculation in line 23. I have fiddled around with some "if" statements but no joy yet.
NOTE: If it makes it easier, I could change the column input to a drop-down box with "-" or null as the options if that makes it easier to call out somehow.
any thoughts out there?
SteveYou can use a custom JavaScirpt calculation or the simplified field nation calculation, if your field names follow the required convention, with the "-" operator.
If you are using the "The field is the ____ of the following fields:", you need to create a hidden field with a default value of "-1", a second hidden field that calculated the product of the "-1" field and the field you want to subtract. You can then use that second hidden field in the calculation. -
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
How can I copy and paste text into Word in Acrobat 9 Pro
How can I copy and paste text into Word from Acrobat 9 Pro?
You might find it easier to export the file to Word under File > Export > Word in Acrobat 9.
-
How to include an attachment in summarize comment report in acrobat 9 Pro?
I have a shared review document intiated using Acrobat 9 Pro, and some ppl have commented using the "Attach a file as a comment" tool. Now when i summarize my comments that attachment does not show up in the report, so how can include the attachment in the report?
Sorry for my late response, have been on holiday...
1) I had installed Acrobat Reader 8
2) I can see the 'Adobe PDF Reader' object in my ActiveX Controls dropdown box
3) I can add this object to a report
4) intellisense does not show the loadfile method but it changes to LoadFile and it compiles
5) displaying the report does not show anything on my report
6) using the object.src property no results either
7) I can add this object to a form
8) intellisense does not show the loadfile method but it changes to LoadFile and it compiles
9) running the form brings up a runtime error 'method not found'
(that's different behaviour as in the report !!!)
10) using the object.src property gives FINE results!!!!
Almost the same behaviour was mentioned in a topic by Bob Wintemberg, http://www.adobeforums.com/webx/.3bc443d7 , but there was no final solution mentioned!
Any help would be very appreciated!
BTW i looked in the 'Developing Applications Using Interapplication Communication' document but that does not bring my any additional knowledge!
Rein Hermens -
How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.
PDF files cannot be natively opened in InDesign. They can only be placed as graphics.
Maybe you are looking for
-
Automatic final settlement of rebates without payment screen
When we final settle SAP rebate agreements with payment screen (where we have to specify the final settlement amount) everything is working fine. But when we attemept to final settle the rebate agreement WITHOUT using the payment screen (all the accu
-
I have power mac G4. What do I do to reimage it to improve its functionality?
I have a power mac G4. How can I reimage it so that I can improve its functionality?
-
HOw do i fix this issue once and for ALL! THis will be the third time now that i bring this up to adobe.
-
One Supplier, One SC, Two Contracts, Two POs, Wanted One PO
Hello all, in classic scenario, SRM 4.0, R/3 4.7. User is creating one Shopping Cart from catalog which contains items from one supplier. Company is having two contracts with supplier, thus considered as two sources of supply in the backend. (Contra
-
Class should be declared error - but it is declared!
After compilation of my coding i get the following error* but i have declared the class FLowps. Please tell me how it shoud be declared....if code needs to be seen please e-mail at [email protected] and will send the code listing. Thankyou. *test.jav