How to Resize Dialogue Boxes that do not have Resize Controls

Windows CS3 5.0.3
Is there a way to increase the default size of a dialogue box that does not have re-sizing controls? Specifically the "New Page Reference" box for building an Index. The Index is becoming a little large and I'm having to do a lot of scrolling through the alpha list.

Well, there is the dreaded (for programmers) DPI Setting in your monitor settings. It attempts to re-size dialogs, to cater for larger or smaller fonts (and the reason it is feared by programmers is that it may fail spectacularly). It may or may not influence the size of Windows dialogs in InDesign.
But that really doesn't matter. If the dialog
i does
get drawn larger, that will be because the texts in it are larger. You will not suddenly have more items visible -- it's a different kind of "resize".

Similar Messages

  • I want to install firefox 3.6 on a rhel 5.6 box that does not have yum on it.

    I want to install firefox 3.6 on a rhel 5.6 box that does not have yum on it. In short I want a firefox 3.6 bundle. I have been through days and days of dependencies and there seems to be no end. I just want the bundle to install firefox 3.6 without all the dependency problems
    [root@vc_mark ~]# rpm -ih firefox-3.6.13-2.el5.x86_64.rpm
    warning: firefox-3.6.13-2.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186
    error: Failed dependencies:
    xulrunner >= 1.9.2.13-3 is needed by firefox-3.6.13-2.el5.x86_64
    libasound.so.2()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libatk-1.0.so.0()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libcairo.so.2()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libgdk_pixbuf-2.0.so.0()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libgdk-x11-2.0.so.0()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libgtk-x11-2.0.so.0()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libpango-1.0.so.0()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libpangocairo-1.0.so.0()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libxpcom.so()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    libxul.so()(64bit) is needed by firefox-3.6.13-2.el5.x86_64
    [root@vc_mark ~]#
    Everything I install has more and more dependencies and it seems unending. Is there a bundle to install this?

    Here's the link to 3.6.13 via the oldapps site http:// www. oldapps. com/ firefox.php?old_firefox=101?download
    ''there is a link for downloading 3.6.13 from Mozilla in the support article that TonyE hyperlinked above - please do not link to non-official websites in this forum - moderator''

  • How to remove an app that does not have an X

    how to remove an app that does not have an X
    i.e.  stocks

    @greg1424
    Who needs newsstand ? It depends if you enjoy reading the newspaper or magazines in your spare time.  Back in the day, you find that small child delivering your morning newspaper.  You open the door, you found out that the next door neighbor stole your daily newspaper, now you have to buy a new one at the neighborhood deli.  Now Newsstand, fix that by delivering the news you love to your iOS device.  Drink some coffee, while flipping pages on your phone or iPad.  Guess what?  You saving the earth, no one stealing your paper and is available anytime you want.   Plus their subscriptions are cheap, so view the link to read more about it.
    Use Newsstand on your iOS device - Apple Support
    Is pages and numbers free?  Is free, you activated or purchased on or after September 1, 2013. Read the link below for more details
    Free Apple apps for your iPhone, iPad, and iPod touch with iOS 8 - Apple Support
    Cheers,
    Wilkie

  • How to display only images that do not have a map location assigned

    I just upgraded to PSE 11.  So far so good.  I am running Windows 7 64-bit, SP1.
    I'd like to find out how to search for all of my photos that do not have a map location assigned to them. 
    Is there a way to do this?  It may be built in, but so far I have not been able to figure it out.
    Thank you.
    Message title was edited by: Brett N

    Hi,
    I think that if you select the Places view, the images shown are the ones that you have already placed. If you then click on Add Places (at the bottom) the filmstrip across the top shows the images that haven't been placed.
    If you then place one of those images, a small icon appears in the filmstrip until you next close that window (click on Done).
    Hope that helps
    Brian

  • How to find all songs that do not have album art

    I create several smart playlists for housekeeping, like songs with no year, songs with no album name, etc. I wanted to create a similar one that lists all songs that do not have any album art associated with it. I have not seen this option when creating a playlist, but I didn't know if there was a way to write a script (that could run on Windows) that could create this playlist for me. I can (and have) gone through each song individually to note which did not have album art, but I have almost 5000 songs, and this is not really feasible any more.
    Has anyone else done anything similar to this? Any suggestions are greatly appreciated.

    Awesome !!! Thank you very much. I did not realize you could use JavaScript to code against iTunes ...
    I don't know if you have written any of these yourself, but do you know how to maybe create a smart playlist with this information via script? If not, no big deal. At least I know have something which I can use, I will just have to run it every so often.
    Thanks again for pointing me to that site!

  • When I use You Tube I get a dialogue box that will not go away.

    It says 'Adobe Flash Player Settings'. Then 'Local storage s.ytimg.com is requesting permisission to store information on you computer'. Trouble is I can't Close it or Allow or Deny it. It is completely unsesponsive. It just sits in the middle of the screen so I cannot see the video. I have unistalled Adobe Flash Player but that hasn't helped

    Does this happen immediately after you log in? If so, one of your login items is probably causing it.

  • How do I remove extensions that do not have a remove choice

    I want to remove the following extensions:
    1) java console "several that are obsolete" 6.0.17 thru 6.0.26
    2) AVG security toolbar 6.103.018.001
    3) AVG safe search 9.0.0.911
    4)Microsoft.net framework assistant 0.0.0

    These are probably "globally installed add-ons" that are parts of other programs you have installed on your computer. The easiest solution is just to disable them instead of uninstalling them.
    For other possible solutions, see [[Cannot uninstall an add-on]].

  • I have a box that will not go away, it says,  "To open JavaApplication, you need to install a Java SE 6 runtime.  Would you like to check for and install one?  If i push not now, it keeps popping up, if I push install, it says it's not available, help.

    I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion.  the box says, "To open JavaApplication, you need to install a Java 6 SE runtime.  Would you like to check for and install one?  (smaller print)  Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading.  A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
    Finally there are two boxes to click.  One says not now.  If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away.  If I click on the second box, Install, it says  The software is currently unavailable.  To install a Java SE 6 runtime later, open Java Application again.
    My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help.  My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can.  Help.

    Does this happen immediately after you log in? If so, one of your login items is probably causing it.

  • HT201210 When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?

    When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?

    Hi IG viper,
    Placing your iPod into recovery mode should allow you to successfully restore the device.
    You might see these error messages if any of these are true:
    Your device has a beta version of iOS.
    You're trying to install an earlier version of iOS (downgrading).
    Your device has unauthorized modifications to iOS, also called "jailbreaking."
    Use recovery mode to restore your device to the latest version of iOS.
    Resolve iOS update and restore errors
    http://support.apple.com/en-us/TS3694
    Sincerely,
    Allen

  • Dialogue box that won't go away

    While using Word, it suddenly shutdown, disappeared fromn the screen and a dialogue box appeared: "The application Word quit unexpectedly. Mac OS X and other applications are not affected. Click Reopen t;o open the application again..." The three buttons are "Close", "Report" and "Reopen".
    None of the buttons work. There is no way to move the dialogue box. AND, when I shut down the computer and started up again, the dialogue box appeared again - not functioning.
    How can I get this dialogue box off my screen?

    Developments since posting question:
    - The dialogue box can be moved around the screen by dragging on the upper part. But it will not go into Trash.
    - I just found and installed a new MS Office 2004 update for resolving the issue: "Word quits unexpectedly when clicking on print."
    - That doesn't solve my problem. Word is now quitting when I click on "Save as", and all new work is lost.
    What a bummer! Maybe I have to reinstall Office 2004.

  • What does it mean when the dialogue box that pops up when you want to bookmark a site says " Remove 3 bookmarks?"

    Using Firefox 17.0. When I click on "Bookmark a Page" under the star in the dialogue box that appears it may say "Remove Bookmark" or "Remove 3 bookmarks." What does it mean - will it really remove three bookmarks?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Annoying dialogue box that won't disappear

    I just updated Snow Leopard to 10.6.4 and it came with an unwanted guest. In the lower right corner of my screen sits a yellow dialogue box that says: "Open as a normal image. Option-click...." It persists in every ap that I run. Any suggestions on how to get rid of it?
    Thanks,
    Dave

    No. http://docs.info.apple.com/article.html?artnum=25751
    Applications/Utilities/Disk Utility and select your volume and then select Repair Permissions.

  • How can I display images that are not included in any collection?

    How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

    Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

  • How can I find photos that are not assigned to any collection?

    Hi !
    I'm using LR 5.7.1 on a Mac.
    When I've retouched raw pictures with PS CC (and do not need the PSD file any longer) I export the PSD (that is in my catalog) as JPG and let it add to my catalog automatically. After that I delete the PSD file. That works fine.
    But .... the new JPG file is not assigned to any collection. That's no problem unless I forget to do it manually after that export (and import).
    That brings me to my question.
    How can I find photos that are not assigned to any collection?
    I tried it with a smart collection after I found nothing suitable in library filter. The search criteria I tried are Source -> Collection with any of the conditions. One with an empty value field, then with just a space and so on.
    Has anybody a good hint for me?
    Thomas

    You can also add numbers if you have collections that don't use alphabet characters.

  • How to import iDVD app from Time Capsule to my new iMac 21" that does not have iDVD?  I can find the iDVD app in the Time Capsule, then what?

    I have a new 21" iMac to replace a 6-year old iMac 24.  My Time Capsule has the iDVD app saved (?) and I can find it, but I can't figure out how to move it to my new iMac that does not have the app.  How to do this?

    You are probably better to install it from ilife disk.
    Can't Find a update or latest Version of iDVD to Download or a Compatibility to Yosemite

Maybe you are looking for