How to resize movie clip dynamically

how to resize movie clip sccording the stage size and width

Similar Messages

Moving a Movie Clip dynamically

Hi All,
I want to move a movie clip dynamically on a predifined
track. How could I do this? help me.
Thanks in advance
Ankur

Ankur Arora wrote:
> Hi All,
> I want to move a movie clip dynamically on a predifined
track. How could I do this? help me.
what kind of "predefined track" is that ?
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right

How do i move clips from home video to roll?

how do i move clips from home video to roll?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to control movie clips using mause scroller...?

....please look
http://www.nagaoka-id.ac.jp/gallery/gallery.html
...how to control movie clips using mause scroller...?

Hi Ldavinci, I have noticed your posts on that particular
site before. Just chiming in here... don't be afraid of Flash Help
menu. There's a wealth of information there and I've found it much
faster than waiting for a response from the forum. Then if it still
doesn't make sense, at least you have a basic idea of specifics to
ask.
If you search for mouse wheel, you'll see an example under
the Actionscript 2.0 Language Reference on this topic. That said,
here's the example:

How do I move clips between projects?

Should be a simple enough task but, how do I move clips made in one project to another project?

clip media is not conained within a project per se, rather it is referenced by a project, so as long as the media is on the hard disc then it can be referenced by as many projects as you'd like.
you can open multiple projects simultaneously ... then to move clips between the projects you can just drag and drop between the various projects' bins, or copy and paste if you prefer.

How can I move clips from one library to another? Clips are still in original drive and not in new drive.

I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
Thanks in advance.

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to play movie clips for a certain amount of time only

Hello everyone, I think I have a relatively basic question here but I can't figure it out. I have a movie clip loaded using action script 3 at the start of my animation, I want ito to end at the 120th frame. But I can't use the stop(); command because it will also stop the rest of my animations from the 121st frame onwards. So my problem is, how can I stop the movie clip without stopping the rest of my animations?
Thank you in advance!

I don't think I have codes that load the swf, but I've sent you the code that I would like to stop. Thanks!

How to load movie clip internal in .fla file

Hi - How do I load a movie clip inside a .fla file?........I
know the script to load a .swf file but I do not know the script to
load a movie clip (New symbo l= movie clip) made in the same .fla
file.
I have a series of movie clips I woud like to load with a
button - can anyone please guide me in the right direction with a
script or some info.....
Thanks
steen

Do you mean loading clips that are in the library?
Use MovieClip.attachMovie();
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"Jean Bang" <[email protected]> wrote in
message
news:ef88kj$c10$[email protected]..
> Hi - How do I load a movie clip inside a .fla
file?........I know the
> script to
> load a .swf file but I do not know the script to load a
movie clip (New
> symbo
> l= movie clip) made in the same .fla file.
> I have a series of movie clips I woud like to load with
a button - can
> anyone
> please guide me in the right direction with a script or
some info.....
>
> Thanks
>
> steen
>

How to edit movie clip in fla library?

I'm attempting to edit some fla files that have embedded
movie clips. I can't figure out how to edit the movie clip files in
the library. I tried exporting the file to SWC file but can't edit
that.
Can anyone tell me how this is done? Do I need seperate
source fla files that maybe I don't have for the movie clip files?
Thanks in advance for any suggestions.

Thanks for your reply. That's what I would normally do but I
think the original programmers of this site did every thing they
possibly could to make it difficult for a non-expert to edit. I've
edited many flash sites but this one is ridiculous.
I just can't find all the images that make up the movie clip
to edit. I've looked through every layer and double clicked on
everything. I've ran out of ideas.
If anyone wants a challenge I'd be happy to send you the .fla
file just to see what I'm talking about. You can't edit
anything.

Moving Movie Clips dynamically

Here's the deal. I have a function that I call to move the
movie clips based on string that holds the movie clip instance
name. The function as I have it now can be seen below listed under
figure A. Figure B shows my call to that function. It takes in an
array of strings and passes the current index to the function.
Figure C shows my output panel text after I run the function.
For some reason, the function is only moving one of my
movieclips, and none of the others. I can tell this by tracing the
instance ._x value, as shown in figure D. So, I know that my calls
to the movieclip instances are correct, but why can I only move one
card?? I know the movie clips are instantiated, as can be seen in
Figure E, which show my objects list that I get from my debug menu.
Any ideas/suggestions?

My latest crack at it... I create multiple controllers for
each movie clip, and I test the calling of the method by inserting
a string literal as the call, still no luck. No matter how many
times I call move, it will only work on the last card that I call.
Framerate does not matter.

Center movie clips dynamically, as3.0

Hi. I have seen this discussed both on Adobe Forums and other sites but I can't seem to make sense of the code supplied by what I have seen thus far.
I am trying to center display objects that are added to the stage at runtime dynamically through a basic drawing application.
the code is something like this:
1. add an event listener for the drawing event.
2. add the path you want to draw to a container movie clip on the stage.
3. add an enter-frame event listener to change the scale of the path randomly .... and this is the moment i want to change the default top,left registration point to the center,center of the path. each path has its own registration point as i can tell thus far but at this point the scale is happening from the top,left of the container rather than about the path's own self. and if it were to happen about the path i would have to get the bounds of the path and do some averaging to center the registration point.
unfortunately i don't know what the code looks like to achieve what i'm trying to get.
any help is appreciated. thanks in advance.

Well if using the graphics.lineTo method is Bitmap data then that is what I'm using. But each call to the shape that I'm drawing is a new Shape(); . The second paragraph you wrote seems a bit daunting when viewing it in the abstract sense. Your first reply was a bit more concrete but I guess the first response didn't account for everything being in one container. Should I create a container2 Movie Clip and create that as a new box on a per-shape basis so that I have multiple container2 mc's in the following path:
container.container2[i].shape[i] where i would be an index (such that i++) though the code wouldn't be written exactly that way. ?
(To store localX,Y positions in an array or vector shouldn't be too hard but I would need to try it several times before I get it right).

How to download movie clips to Mac OS X 10.4.11 from Nikon Coolpix S640?

Hi ~ I have photos and one short movie clip on my SD card. I downloaded all the photos into iPhoto. Since the movie clip was on the same SD card I thought that it would automatically download to "somewhere"? I did find out that it would be a AVI file, I believe. I tried to find it somewhere on my computer but could not. Where did it go?
Luckily, I did not erase it from my SD card. I am wondering how to correctly download this movie.
I have not installed the Nikon software because it overtakes my photos in iPhotos and I had a scare when I thought I lost all my photos. I uninstalled it and my photos reverted back to normal in iPhoto. Who knows, maybe I did it wrong initially. Anyways, I contacted Nikon C.S. and they said if I did not want to use the Nikon software to download with, then the movie clip would be viewable in QuickTime. I could not find it there, either. I hope you can assist.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Gradually resize movie clip

Hello,
I am trying to make a site for myself and I would like to
make a movie clip which will be changed in size (scaled) when
specific buttons are pressed. I would like to make a gradual
transition from one size to the other using actionscript . I tried
to find a tutorial on this but nothing came up, can anyone give me
any advice on how to do this? Any information wil be very helpfull.
Thanks.

Use the tween class for example.
button_mc.onRelease = function(){
new mx.transitions.Tween(clip_mc, '_xscale',
mx.transitions.easing.Elastic.easeOut, 0, 100, 5, true);
lots more info in flash help. look up transition
manager

How to resize movie clip dynamically

Similar Messages

Maybe you are looking for