How to resize Tabs, Menu bar and Bookmarks Bar 36.0, no "userChrome.css" file help?

So I lost my profile when FF updated, and had to create a new one. From what I can tell, to do what I want to do I need a Chrome Folder inside the new profile folder. There was none, so I created one. I also created a .css file named exactly how I put it in the title, is this the correct name, or should "user" be my profile name?
Last but not least, here is the exact text I have in the file, nothing more, or less, just this:
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#TabsToolbar { height: 15px !important; }
#PersonalToolbar {height: 4px !important;}
#BookmarksToolbar {height: 4px !important;}
#MenuToolbar {height: 4px !important;}
#tabbrowser-tabs { height: 15px !important; }
#TabsToolbar { margin-top:-15px!important; }</nowiki></pre>
Saved the file. Restarted FF, no effect. Changed numbers, still no effect.
TIA for help.
p.s there is likely some redundacy there for sure, please advise. I want all 3 in title of thread smaller (as in less height)

I use this code to resize the Tab bar.
I'm on Linux, so you may have to adjust or omit the margin-top and margin-bottom properties.
<pre><nowiki>#TabsToolbar { height:25px!important; margin-top:-1px!important; margin-bottom:1px!important; }
#tabbrowser-tabs { height:25px!important; min-height:25px!important; }
.tab-background-start[selected=true]::after,
.tab-background-start[selected=true]::before,
.tab-background-start,
.tab-background-end,
.tab-background-end[selected=true]::after,
.tab-background-end[selected=true]::before {
min-height:25px!important;
}</nowiki></pre>

Similar Messages

How to resize the menu,address and bookmark toolbars. Not the font but the toolbar sizes

I'm trying to reduce the overall space of the top of the firefox page.
I have the menu and the the bookmarks tool bars checked and between those 2 and the address and site header it takes up way to much real estate.
My font size is good but the wasted area is way to much and I can't seem to find the simple answer to looking for addons and themes to just resize the height of the space.
This is the new 33.1 and up to this point all custom has been a breeze.
Thanks much.

Hello,
Have you considered running Firefox in [[How to make Firefox and websites go full screen|Full Screen mode]]? There is also an extension that hides the toolbars until you hover your mouse over the top of the screen:
* https://addons.mozilla.org/en-US/firefox/addon/fullscreen-toolbar-hover/
You can change the size of your toolbars by using the userChrome.css file, or by installing [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish] and using one of these styles:
* https://userstyles.org/styles/9349/navigation-location-bar-minimal-height
* https://userstyles.org/styles/9350/menu-and-searchbar-minimal-height-dm
* You can edit the code of the style to suit your needs better. I don't know how it will affect the current interface, so if you find that Firefox becomes unusable after using this style, load Firefox in [[Troubleshoot Firefox issues using Safe Mode|Safe Mode]] and uninstall Stylish to remove it
** Alternatively, if the address bar still works, type in '''about:addons''' in your address bar, and go to the User Styles tab, then disable/remove the style
For more information on userChrome.css:
* http://kb.mozillazine.org/index.php?title=UserChrome.css

How to capture 'DELETE' menu bar option in VA02 application.

Hi to all
Please tell me how to capture 'DELETE' menu bar option in VA02 application.
It is captured in Sy-ucomm but as the pop up message comes it is over written.
Based on the 'DELETE' selection i need to write my own validation coding in user exit .
Please tell me how to do that.
Thanks & Regards
Anubhav Gupta

Thanks to all
In present situation userexit_save_document_prepare
Validation logic is fired for both VA01 and VA02 application.
Here for checking logic is :
if T180-TRTYP = 'H'.
vmbtcode = 'VA01'.
else.
vmbtcode = 'VA02'.
endif.
Now I want to skip this logic if - In VA02 application Delete sales order option from menu is selected.
Please give me suggestion.
Thanks& Regards
Anubhav Gupta

Hi I have a mac mini with my TV as a display. MY display includes the taskbar but no menu bar, how do I see menu bar???

HI
I have a mac mini with my TV as a display. My display includes the taskbar but no menu bar, how do I see menu bar???

Make sure you are using a 1080p capable TV. Some TVs have pixel level video ratio adjustment. Sometimes that can force the menubar to be visible if it is the only display connected to the machine. Sometimes you have to go to your hard drive's Applications -> System Preferences -> Displays and drag the white bar on top of the display's representation to the other display. You can only have one primary display with menubar.
Lastly, for non-1080p capable displays, DisplayConfigX or SwitchResX offer pixel level adjustments through software.

How do I get my history and bookmarks back to work?

Hey guys,
I downgraded my Firefox from version 7.0.1 to 3.6.22, because some of the really important add-ons didn't work on version 7 anymore and it said, that there were no updates for them right now. And after I downgraded Firefox, it keeps saying, that it can't create a history and bookmarks since something else is using the files required for creating history and bookmarks.
I troubleshooted already and tried everything I could find on the Firefox Support Page, but it didn't help.
So, I really hope you guys have any idea what else I could do to get this fixed. :)
Sincerely,
Ghosty

Do NOT take any option that says something like remove personal settings, because that is likely to remove profiles from all normally installed versions of firefox resulting in the loss of bookmarks, passwords, and other settings.
It is too late to help now, but it is always good practice to somehow back up your bookmarks e.g. manually
* see [[backing up and restoring bookmarks]]
Firefox does try to keep backups, but they are in your profile, and can get corrupted or deleted in some circumstances
* see also [[lost bookmarks]]
Can you post the exact wording of the message it may help in working out what is happening ?
It will certainly be worth starting in Firefox's [[safe mode]] by for example holding the shift key as you start, or using the menu option.
* do not make any changes on the first option window you see, just click on continue
* use only the default theme
* if it does not improve then whilst still in safe mode temporarily disable all plugins
See also
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox <br> note in particular the mention of the add-on to rebuild the database
* [[Firefox is already running but is not responding]]
It may well be a sensible precaution to preserve the current situation/data by backing up your profile by simply copying it and its folders and files to some location such as your desktop. (Quickest way to find its location firefox button -> help -> troubleshooting information -> profile [open containing folder] )

Labview - How to create custom menu bars, drop down menus, pop ups etc.

Hi,
I have a very naive question. How does one create menu bars with custom labels (not NIs defaults), drop down / side menus, pop ups etc.?
Thanks in advance
Paul

Search for the following on the NI website: Run-Time Menus, Run-Time Shortcut Menus.
For pop ups, search for 'dialog' in the Examle Finder (Help -> Find Examples)
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Will Firefox post a download to correct thick multiple tab menu bar or provide a delete tab menu bar option?

I wish to reduce the thickness of the tab menu bar in Firefox 4.0 or have the option to delete the bar. I've tried some of the blogs but nothing seems to work. Wondering if your support team could provide users with a download update providing these options?
I'm using Windows 7 on a laptop.
Thank you,
Craig

DW_Noobie wrote:
can anyone help
It depends. I can see your two pages as in this link:
<http://www.thecampuscocktail.com/speedydrinks.html>
<http://www.thecampuscocktail.com/feedback.html>
You need to describe what these issues are.

How do I show the bookmarks toolbar while in fullscreen on Firefox 20? In older versions you could edit the userChrome.css file. Does that still exist?

After searching for this option, it appears it was very easy to do in older versions of firefox on windows 7. Many posts say you can edit the userChrome.css file to add:
#PersonalToolbar[moz-collapsed="true"] {
visibility: visible !important;
However, on 2 machines with firefox 20, I've searched for that file and cannot find it. Does it even exist any more? if not, how can I set firefox to go to fullscreen mode and continue to show the bookmarks toolbar? Unchecking hide toolbars does not work for the bookmarks toolbar.

userChrome.css does not exist by default. You can create it; it's an ordinary text file. Note that you do need a namespace at the beginning of the file.
You could try this:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#PersonalToolbar[moz-collapsed="true"]{
visibility: visible !important;
#navigator-toolbox[inFullscreen="true"]{
margin-top:-62px !important;
I added the second rule to prevents the toolbar area from rolling all the way up. The specific value may need to be adjusted by a few pixels depending on your toolbar heights.

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

Not able to find userChrome.css file for customizing the Firefox browser. I just installed 20.0.1 firefox browser. Want to disable/remove navigation bar.Pls Hlp

Not able to find userChrome.css file for customizing the Firefox browser. I just installed 20.0.1 Firefox browser version.
I want to disable/remove navigation bar from the browser window, making the browser to work like kiosk mode.
Please Help,
Thanks,
Vishal.

hello,
here is the complete path ..
''C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\chrome"
Let me know
Thanks,
Vishal.

How to disable the menu bar from hiding and fix screen?

I've looked thoughly to find the answer online, system preferences and here with no luck. I recently updated my software to Mac OS X 10.7.4. Now the menu bar is automatically hiding, but reapearing when I mouse over and the screen in all windows are too wide and long. When I click the 'green' icon for resizing the window, it sizes it too wide and long. I am not in full screen and do not have enlarge on (COMMAND +) and i've check the display settings. Maybe Mac added this as a feature with the update thinking people will like it but I don't like it at all, my typing in an email is not visable on the right. Can someone please tell me how to turn this feature off? Also the resolution/clarity of my screen is not as good since the update. It is not much of a difference but enough to make my eyes hurt a bit.
thanks for your help!

Yes it is Aluminium. Yes I checked that it is set to 1280 by 800 and changed the resolution and changed it back many times to see if that would help. Is this not a new feature with the new OS X update? Thanks

Is it possible to resize the Menu Bar and other toolbars to make them smaller vertically?

With the update to Firefox 4 my menu bar and toolbars are now taking up significantly more space than they where previously - is there any way to resize them so they take up less space?

Thanx, I had searched for "compact themes" and didn't find all of those for some reason (may have been a typo in the search field... I do that sometimes... =/ )

How to turn of menu bar and window decoration of Forms 11g Rel2?

According to Forms documentation, one can turn off menu bar and window decoration.
How can that be done?.
Best regards, Luis ...:)=

From the documentation (Forms Deployment Guide), see Section 3.4.3. Refer to "guiMode"
http://docs.oracle.com/cd/E38115_01/doc.111210/e24477/basics.htm#BABGEGBC

How to resize Tabs, Menu bar and Bookmarks Bar 36.0, no "userChrome.css" file help?

Similar Messages

Maybe you are looking for