How to resolve an issue of static and popping noises on my iPhone 4S?

I just begAn to experience static and popping/crackling noises when on a call. This doesn't happen on speakerphone. I have had the phone for 13 months.

Hi Tin Knocker,
Thanks for visiting Apple Support Communities.
If you've started to hear static or crackling through your iPhone speaker, the troubleshooting steps in this article can help:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jeremy

Similar Messages

  • FIOS router causing static and popping noises on computer audio

    Hi, I'm a less than two week old FIOS internet user and am loving the speed and service but I have one problem. The FIOS router seems to be causing static popping noises my desktop computers audio that is connected to the FIOS router by the yellow Ethernet cable. Theses noises don't occur on any of the laptops connected to the router by the wireless or when I connect a laptop to the router via a Ethernet cable.
    Ways I found to eliminate the noises temporary:
    Restarting the desktop computer or shutting down then turning on the desktop computer.
    Ways I found to eliminate the noises permanently
    Turning off and unplugging the router.
    Hooking up the FIOS router via the Ethernet cable to a laptop. I unfortunately do not have a wireless built into my desktop.
    What I've tried and failed
    First I thought it was the Ethernet cable, so I replaced it. The noises did not go away.
    I thought it might be the headset I use which are connected to the computer by a usb port. Unplugging the headset and using earphones which are connect to the computer by the audio slot did not eliminate the noises.
    Then I contacted Verizon, and they thought it might be a faulty router, so they sent me a new one. The noises unfortunately did not go away.
    I then thought the noises might be occurring because the router was close to the computer. So I moved the router as far away as possible from the computer (its connect to the router by a Ethernet cable so it wasn't that far) but the noises didn't go away.
    Notes & Points
    The noises do not start the moment I turn on the router and computer, but a hour or two after.
    I think I've narrowed the problem down to occurring only when the desktop computer is connected to the router by the Ethernet cable. Though replacing the Ethernet cable has not resolved the issue.
    I also have found that location of the FIOS router also doesn't matter since the noises did not return even though the router was right up against the computer when I connected the FIOS router to my laptop.
    I have Windows 7 Home Premium 64, 3.5 gigs of ram, and a dual 2.0 GHz processor.
    So that sums up my problem. If you guys have any tips or ideas of how to fix my issue, it would be greatly appreciated.

    Sounds like a shielding problem on the AUDIO cables or a grounding issue.   PC sound systems are notorious for having lousy audio cables feeding (I regularly pickup the local FM station on my speakers).
    Try replacing the audio cables with better quality shield cables and see if that helps.
    Are the router, speakers, and PC all plugged into the same outlet?  Are they all polarized plugs?  If note, try flipping the power plug on the non-polarized connections.
    The sound could be coming from interference INSIDE the PC itself ... the proximity of sound cables inside and the audio chipset to the ethernet chipset.   You didn't indicate if the audio/ethernet are on the motherboard or seperate cards.   If they are seperate cards, try relocating the cards furfher from one another inside the chassis and also look at the audio cable (particularly the analog cable that runs from the CD to the audio card to make sure it's not routed past or near the ethernet electronics.
    How far distant is the router from the PC?  If you pull the ethernet cable from the router (not turn if off, unplug the ethernet cable running to the PC), does it stop?

  • I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • Hi! I have a MacBook and I am trying to delete files from Microsoft Word. Somehow I cannot simply throw them in the trash. Does anyone know how to resolve this issue?

    Hi! I have a MacBook and I am trying to delete files from Microsoft Word. Somehow I cannot simply throw them in the trash. Does anyone know how to resolve this issue?

    Why not? Are there error messages? Where are the files located? Why are you deleting MicroSoft Word files?

  • HT1689 I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

    I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

    Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
    I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone.

  • I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

    I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

    Please also see Boot Camp: Set the default operating system.

  • When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue?

    When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue? i have to click on the green arrow button to continue.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • HT1766 After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

    After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?

    My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?

    Try Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    Connect to iTunes and try to reset it from there.

  • HT201328 There's an icon symbol of a lock with an arrow circleing it how can I find out what this is and just how to resolve this issue?

    I turned the iPhone on to find out that there's a lock with a circle with an arrow arroubd it! Can any one out there give me any advise on just how to resolve this issue?

    Please check your duplicate post for answers already provided.
    https://discussions.apple.com/message/24278034#24278034

  • How to resolve this issue??

    I have given box / borders for cells in the table in smartforms. in main window.
    Now when i print with HPlaser the output comes fine.
    But when i use Epson - The borders almost print 5 to 6 times bigger & looks to ugly and even the data is not shown. Meaning the data is overshadowed by the borders of the Cells.
    Tried to reduce the <b>width</b> in the BOX option of TABLE in smartforms. By default it is 15.00 TW.  did not work.
    EPSON is what they want to use.
    Please let me know how to resolve this issue.
    Regards,
    Siva

    Hi Siva,
    Ask them to provide the Diamension of what paper type they
    are using for EPSON, becoz U might have kept paper size
    as A4 and there they might be using INCH12 or some other size
    of paper( not Sure ).So if u can have the Exact paper format that
    they are going to use , u can design ur form in that paper format
    and then check.
    Regards
    Avi.....

  • Error in ST05 - trace record pair error block. How to resolve/tackle issue?

    Hello,
    Someone approached me last week in asking me how to resolve an issue in ST05. Basically I used the transaction to filter "inclusive VBPA".
    The error is ....
    Internal error - trace record pair error block 8 link no. 0
    Message no. 0S 026
    Diagnosis
        Each SQL statement is described by two SQL trace records that have the
        same link number. In this case, there are at least three records with the
        same link number.
        The system outputs the number of the block in which the third SQL trace
        record was found, as well as the link number of the records.
    System response
        Program processing continues after the message is displayed. The system
        processes all of the trace records. You should assume, however, that the
        SQL trace in this case is not displayed correctly.
    Procedure
    You cannot correct this error yourself. If you can reproduce the error,
    contact the SAP Hotline.
    SQL trace list editing terminated after 6 errors
    While using the trace I am executing the program that selects VBPA once and, I am assuming, as it goes through the BAPI BAPI_SALESORDER_CHANGE used to unblock a delivery block. I am guessing the problem or source is from the BAPI but do you guys have other insights in what is causing this issue?
    Thanks again, hope to hear from you soon, and good day.

    Our ERP LIVE Production around 11am all users encountered cannot generate print record from the submit new request. see below errorFor production issues, please log a SR.
    ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
    ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
    ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.Please see these docs.
    OERR: ORA 60 "deadlock detected while waiting for resource" [ID 18251.1]
    What to do with "ORA-60 Deadlock Detected" Errors [ID 62365.1]
    Thanks,
    Hussein

  • I have started to get this error message: 5.1.3 bad address syntax in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?

    I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?  My email account is through Optimum online and I am using Airpost Express.
    P.S. The error sound "bong" is driving us nuts!

    Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.

  • How to resolve hang issue in  Iphone 4s with IOS 7

    how to resolve hang issue in  Iphone 4s with IOS 7

    Hi there ECMA IPHONE,
    The article linked below provides a lot of great information and troubleshooting tips that will most likely help you resolve the issue sending emails from the specific email account on your iPhone 4s.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Ciao, 
    -Jason

Maybe you are looking for

  • Service order from EBP to SUS

    hi, following issue observed for service purchase order creation in EBP (SRM7). Service structure is not displaying as like in ECC6. when i am creating service order in EBP service lines are entered at Item level like material. giving multiple PO lin

  • How do I change the order of input tables in joiner?

    I have 3 input tables in a JOINER, how can I change the order? for instance, the order now is: t1, t2, t3, for some reason, I want to change to t3, t2,t1. I use outer join among tables, different table order cause OWB generated different sql statemen

  • LINKING TO SITE ALREADY PUBLISHED ON .MAC

    Hi, I have recently changed computers following a disk failure. I use .Mac and iDisk to back up all personal files and therefore no data was lost, but there is one rally annoying problem: I cannot link the newly installed iWeb to my pubished pages on

  • Petition for MP3

    As MP3pro will greatly increase performance for all Creative mp3 players, I propose to petition Creative to support the MP3pro codec. MP3pro is a much more efficient format to encode your music into and is half the size of a normal mp3 file. The foll

  • Problem mit Photoshop Elements 9

    Hallöchen, schonmal vorab, ich habe wirklich nicht viel Ahnung von irgendwelchen Einstellungen. Ich weiß nur, dass ich Photoshop Elements 9 schon eine ganze Weile habe und seit seit ner Weile nun irgendwie alles umgestellt wurde oder vllt. sogar "kap