How to resolve corrupt JPG problem (and plist errors) in Aperture

After restoring from a Time Machine backup, I have been unable to create a new backup, and I suspect that the problem is down to some of the JPG files on the original backup being corrupted. As a result the restore over-wrote the good versions inside my Aperture library. Aperture's own rebuild option does not help.
I ran TechTool's file structures test and it reveals that some of the PLISTs in my Aperture Library do ´not contain valid content'.
The individual JPG files are all there within the packet, but some of them refuse to open in preview or copy to another drive.
What tools could I use for attempting to recover these image files?

A combo updater is different from a version update - the combo updater contains all the patches of all the previous updates of the major version. 10.6.8v1.1 combo updater will update any version from 10.6.0 through 10.6.7 - which you would use if having to reinstall from DVD.
Corruption is a possibilty in any network connection when pushed to the edge of its achievable speed. If can happen over wifi or wired connections. It does not result from packet loss, because packets are guaranteed by the network stack. Corruption of data within a packet can occur. Thats where the checksums SHA1 and md5 can be used to guarantee with a very high probabilty that a file is intact.
So certainly the fix for corruption involves getting a more reliable network connection - in general wired is better than wireless and strong signal is better and slower is better than faster.
For those without options to connect to a more reiable network, repeated attempts at download will usually result in a good copy eventually.

Similar Messages

  • HT1338 My mail will not delete. When I move it to trash and then delete it within a few minutes it has all bounced back in again.  Checked my preference settings and all seems to be in order. Any ideas how to resolve this frustrating problem?

    My mail will not delete. When I move it to trash and then delete it, within a few minutes it has all bounced back in again.  Checked my preference settings and all seems to be in order. Any ideas how to resolve this frustrating problem?

    That sounds like a compatibility issue with an add-on that you have installed, as reported by a number of users in both Firefox 22 and Firefox 23 over the last couple of months. If you would provide a listing of your installed extensions ''(as you were prompted to do when creating this thread)'' maybe one of us can advise you which extension is the mot likely culprit. You will need to re-install Firefox 23 to do further diagnostic testing.
    As far as the compatibility of Firefox 23 and Win XP SP3, Mozilla has verified they are compatible and not one user ''(including me on two separate PC's)'' has reported a problem with compatibility.

  • How to resolve AVCHD package problem in mountain lion

    how to resolve AVCHD package problem in mountain lion

    Thanks, David. I know this workaround. And one more with creating right-click Service. That's why I've used "uncomfortable" instead of "impossible". In my opinion, Apple should leave ability to choose OS's behavior, and I hoped somebody knew where to find it .

  • HT1483 Ipod froze. How to get over the problem and bring it back?

    Ipod froze and not responding. How to get over this problem and bring back the Ipod ?

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

  • I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

    I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

    Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
    But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
    While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

  • I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

    I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

    Log into your iTunes account, then click on previous purchases then select the purchased app and then click report a problem.  Then write and explain your problem and I am sure it will be considered. 
    Also change your iTunes password as soon as possible.

  • How to resolve "Contacts has stopped" and "Sync experiencing problems" after ICS upgrade?

    After receiving the Droid Bionic operating system upgrade yesterday, my phone has lost its record of all my contacts, is unable to retrieve them from Vzn Backup, won't synch with my gmail contacts, and won't even allow me to dial phone calls.  Does anyone know how to resolve this?
    I'm getting the error message when I tap the People or Phone icons:
    Unfortunately, Contacts has stopped.
    When I go to Accounts & Sync, I get a Sync error, and the message
    Sync is currently experiencing problems. It will be back shortly. 
    (I have been getting that message since yesterday.)
    And under Settings > Backup Assistant+ Contacts, when I tell it to Synch Now,
    Unfortunately, Backup Assistant+ Contacts Client has stopped.
    I tried the Verizon chat service, and was very frustrated to be told that I either have to call Tech Support (hard to do when your phone won't dial!!!), or go to a store for them to fix it in person.

    Good to find this forum on Android issues... Thanks Verizon!
        I also started getting the 'Unfortunately, contacts has stopped' after the new OS update. I want to add my 2 cents since I found a very different fix (after trying the other stuff)...
    My "contacts stopped" problem seemed to come and go, but actually I think it was more subtle, at least in my case, only affecting some of my contacts but not others... When I finally got tired of putting up with it, I tried a number of Power-Offs, hoping to clean up something (hey, it often works for Microsoft OS). At this point, I noticed that some contacts would get the errors but not others. Then I found this forum, and I was optimistic that the clearance of the cache data would fix it, as it had for others... but not so lucky, in my case.
       FINALLY, I decided to take a look at my Google contacts online. There were any number of duplicates that I don't recall creating. Perhaps emails or phone calls occasionally produce some of these? There were also a few contacts that I did not recognize at all (maybe due to the same causes?). SO, I cleaned up the online version of my contacts, went back to my phone, and now the contacts are no longer "stopped"!
       I hope this can help someone. I wish I had thought of it earlier.

  • When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word and Pages.  Any idea of how to resolve this annoying problem is appreciated.  System: 10.10.1

    When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word 2011 and Pages.  Any idea of how to solve this annoying problem will be much appreciated.  System 10.10.1 on a MacPro (Late 2013)

    The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
    Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
         https://www.youtube.com/watch?v=ZNQ0D84DdF4
    What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

  • How to resolve this Search Problem????

    Hi Every one
    I have a search module..I've never worked on... the problem is when i run that search module and after selecting date from date picker and clicking the search button i got following error:
    Error
    JBO-27122: SQL error during statement preparation. Statement: SELECT CtLine1.COST_TRAN_LN, CtLine1.COST_TRAN_ID, CtLine1.COST_TRAN_DATE, CtLine1.LINE_DESC, CtLine1.ACCOUNT_ID, CtLine1.OPERATING_UNIT, CtLine1.FUND_CODE, CtLine1.DEPT_ID, CtLine1.PROGRAM_CODE, CtLine1.CLASS AS CLASS11, CtLine1.PRODUCT, CtLine1.ACTIVITY_ID, CtLine1.STATUS_ID, CtLine1.TRANSACTION_AMOUNT, CtLine1.PROJECT_ID, CtLine1.CONTRACT_ID, CtLine1.ADJUST_AMNT, CtLine1.ADJUST_PRCNT FROM CT_LINE CtLine1 WHERE ( ( (CtLine1.COST_TRAN_DATE = TO_DATE('Mar 13, 2008', 'yyyy-mm-dd')) ) )
    ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    Actually I'm Getting Date from date picker in Mar 13, 2008 format and my database format is yyyy-mm-dd...
    so please help what to do now...and how to resolve this problem..

    hi frank,
    use this following code
    <af:selectInputDate>
    your code here
    <af:convertDateTime pattern="yyyy/M/d"
    secondaryPattern="d/M/yyyy" />
    </af:selectInputDate>
    the database date formet it different from what u have selected using selectInputDate.
    just add about bolded tag.
    Thanks & Regards,
    Arun

  • How to resolve many fact tables and Dimensions tables

    Hi,
    The scenario is we have many facts and dimension tables. Based on some conditions one measure from one fact will be divided by another fact measure. I have encoutered with many errors like " Unable to navigate .... " ? How to resolve these errors and reduce many to few ? ( I assume creating logical tables, but is there any other alternatives ? )
    thanks
    Suresh

    Suresh,
    I assume that you know how to create a single logical fact from n-physical facts, ie only if the fact tables are related. Then join all the conformed dimensions to this single Logical table using a join in the Business Model layer. Remember to set the mappings in the LTS. All if you have any hierarchies please set the aggregation level for those.
    - Red

  • How to open a .jpg image and edit it.

    I can't seem to figure out how to open a .jpg image or any image in Flash Professional CC. I'm quite new to this so sorry if this sounds like a stupid question. When I go to File>Open I can only see .as , .fla, .jsfl , .xsfl and .xml files. I do not have an option to be able to view .jpg or .png pictures. I would appericate if somebody could take the time and answer this for me
    Thanks

    If you want to edit a jpeg or png image, do that with a separate program such as Fireworks or Photoshop.  After you import the image into Flash you can edit the image again in these separate applications and update the image you imported into Flash via selecting the Properties option in the library menu for the image and clicking the Update button.

  • Pearl syncing problems and unspecified errors

    Hello all,
    I have had this bbpearl flip for about a month now, and over christmas I added email and total internet to my phone package, so I am in the process of setting up all of that. Ever since I enabled the web and whatnot, I have been having sync problems. I tried to add email addresses to my outlook contacts by importing a .csv file, which gave me a box that said "Unspecified Error occured" during the sync. I have reinstalled the desktop manager software (v4.6) and the device software, and restored my harddrive to an earlier version. Everything seemed fine until I tried to use my bluetooth adapter to sync with my laptop. Turns out that the adapter doesn't work very well with Vista (which is what I have) so I have abandoned that idea for now. This morning when I plugged in my phone to sync, I am getting an Unspecified Error again. The last time I synced this way it worked just fine, and I don't know of anything I have done in the meantime to mess it up. Any ideas?
    Specs:
    BB Pearl Flip 8220 w/ T-Mobile
    Toshiba Satellite running Windows Vista
    Microsoft Outlook 2002 and Office 2003

    no1khan wrote:
    I have the same problem, i think its record 55. However i am sync'ing from the device to outlook. How do I find record 55 and how do I inspect from device...
    Hello,
    I haven't had to do so in quite some time, but I recall that if you do an export from Outlook, the order the data is in will be the same order that the sync process uses...which should enable you to find the record in question. However, that's from Outlook to the device...and you say you are doing the reverse...
    Perhaps if you use the Desktop Software to perform an export from the BB, the records may well be in the order needed?
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Itunes wont open, encountered problem and send error report

    Everytime i try to open windows, it says that itunes has encoutered a problem and needs to close. it has the send error report message too. please someone help

    Meaghan, I already responded to your topic. Plus, it is simply not good to bury your post in other people's topics, and just for the future, if you have a problem without a good answer, don't post what has already been said in a thread. I know, the discussions take a little getting used to, but it is easy to get the hang of it after a couple of visits. You'll get it sooner or later. I know you will.

  • How can I change disclosure prompt and Information/Error Headings in UIX

    Hi all
    I want to change disclosure prompt("Details"),texts ( "Show/Hide" ) and information/error headings that are shown during error and message notifications at top of the UIX pages.
    I know these texts change according to the locale of browser but I want to override these texts according to my favorite.
    Does anybody know how I can do it ?
    Thanks for your help.

    Navid -
    Although these messages aren't currently customizable, but we are looking into supporting this in future UIX releases. The more details that you can provide regarding precisely what you need to customize, the better.
    BTW - in the table detail disclosure case, are you looking to be able to customize these messages (Details, Show, Hide) on a per-table basis? Or do want to change these messages in a consistent way for all tables in your application?
    Andy

  • How do you turn on NFS and RPC error logging?

    I'm trying ot find NFS and RPC errors. Di I need to turn error logging on for those calls? Where would/should they show up?

    This is what I use;
    log4j.logger.com.businessobjects = DEBUG, stdoutAppender
    log4j.logger.com.businessobjects12 = DEBUG, stdoutAppender
    log4j.logger.com.crystalreports = DEBUG, stdoutAppender
    log4j.logger.com.crystaldecisions12 = DEBUG,  stdoutAppender
    log4j.logger.com.crystaldecisions = DEBUG,  stdoutAppender
    You will of course need to adjust to the log4j appender you have declared
    Steve

Maybe you are looking for