How to resolve email virus?
This morning an email went out from my msn email address to EVERY email address that has ever come through my inbox. What happened and how do I resolve this issue? So incredibly frustrated as this was the reason I bought and Apple MacBook Pro, that I wouldn't have to worry about security issues.
Thanks for this. I did read your article after I had already sent you another msg. Just had to chg my pswd again likely because of the "back door" issue. While I never talked to anyone, online it noted that my email had been invaded. They called with a security code and I reset the pswd. Hopefully that will be it. Should I now go in and chg pswds to all of my personal info accts.? I get statement emails, etc. So now I'm worried about all of that.
Similar Messages
-
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.
-
I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?
You won't be able to change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to correct your rescue email address for potential future use -
Hi
I am having problems sending emails when using my ipod touch with wi-fi abroad. When at home my ipod touch receives and I can send emails through my home wi-fi system but when away and logged into other wi-fi networkcan only receive emails and not send them. Internet access is fine when abroad.
I am assuming that this is to do with the outgoing server but this is only a guess!
I am not very techy so any ideas how to resolve this problem would be gratefully received.
Thanks
KeithGHSeems like the other networks are blocking you from sending emails.
Do yo have more that one email account on the iPod?
Have you tried sending from another account? -
Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!
settings >>>>notifications>>>>Mail >>>>allow notifications >>>off (your choice )
settings>>>sounds>>>new mail>>>>none ( will kill rings ) -
in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that
while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])
-
Duplicate emails are coming through Ibots. Can you any help how to resolve
One of our user is receving Duplicate emails through Ibots for scheduled reports.
I am not fully aware of Ibots. Can any one help me how to resolve this.
ThanksI'd imagine that email address is being picked up twice, be it as a delivery profile against two different users, or the ibot is being sent to a group they belong to AND them directly (or two groups they belong to).
-
When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??
I would understand it if you checked email on your Mac, and then those messages were not available on your iOS devices if you had the advanced account setting "remove copy from server after retrieving message:" set to immediately.
I looked through my iPhone settings and don't even see an option to tell my phone to pull the only copy of a message and delete it from the server.
Possibly there is another setting in Lion (I am running Snow Leopard still) that tells your Mac to only synchronize mail to your iOs devices and is not pulling mail directly from iCloud.
You could try disabling your current iCloud email account in Mac Mail, and adding a new one and just telling Mail it is a standard IMAP account (imap.mail.me.com incoming and smtp.mail.me.com outgoing).
I did that for Leopard to get my email even to work after MobileMe is cancelled and it seems to work fine with my iPhone.
If that doesn't work, you can delete that new email account and re-enable the temporarily disabled iCloud email account from above.
Hope this helps. -
How to resolve the "Builld error mxmlc task failed" in flex4 web application
hi all,
I am using flex 4 mxml web application wiht as3. when i deploying this project i am facing the folling error.
Environment:
Flex 3.5 SDK
Flash builder 4 . APPLICATION NAME: BillProcess
Ant compile tasks
============
<property name="FLEX_HOME" value="C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\3.5.0/>
<property name="JAVA_HOME" value="C:\Program Files\Java\jdk1.6.0_06"/>
<property name="JRE_HOME" value="C:\Program Files\Java\jre1.6.0_06"/>
ERROR:
init:
[ippprojectproperties] qbServer = workplace.intuit.com
[delete] Deleting directory C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess\Dev
[mkdir] Created dir: C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess\Dev
checkForCustomBuild:
custombuild:
dependentProjects:
compile:
[ippflexbuild] Parsing: C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess/.actionScriptProperties
BUILD FAILED
C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess\ippbuild.xml:101: mxmlc task failed
Total time: 16 seconds.
HOW TO RESOLVE THIS.
please share your useful suggession,
cheers,
B.venkatesan.hello,
Check out this link http://www.kirupa.com/forum/showthread.php?309387-ant-mxmlc-task-don-t-compile-with-FlexSD K-4 this may solve your problem.
Gajanan Hiroji | [email protected] | www.isacglobal.com -
How to edit email account in blackberry 8900
Dear all,
I have installed my yahoo email address on my BB 8900, before some of a days I changed the password of my yahoo email address from PC, now I can not receive or send emails form BB, I tried to update the new password in BB but I have no idea about how to edit email account on BB 8900, I will be very appreciated if there anyone help me to solve my problems.
Regards
alobaydee
Solved!
Go to Solution.Login to your BIS account:
there, find and edit your yahoo account. Either edit the password, or simply delete the account and re-add it again.
Go to the Personal Email Set Up icon and log in.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How Receiving Incoming Email works?
Hi I would like to know how receiving incoming email works? SharePoint supports incoming emails for library/calendar
list/discussion
board/announcements
list I did whole setup to receive incoming emails but what i am not still clear is , do I need to request separate email ID in AD for each type of list/library/discussion board?? I learnt we need to specify drop folder name while SMTP
configuration from there all .EML msgs will be routed to respective library/list, but my question is how that get routed. I know there is "SP incoming receiving emil" timer job which runs every minute or so and picksup .eml msg but how does
it route to respective library/list. Will it be possible to have single incoming receiving emaild ID for all resources OR do I need to have one-one mapping of email ID for each library/list. Please let me know if you aware or any article or guide.
In summary , For example if i have 10 lists to enable to receive incoming emails then do i need to have 10 email IDs created in AD&Exchange or can it be done using single emailID in AD but manipulate it either domain level or exchange level.
Perhaps I could think some segratation based on some metadata but user may not fallow the same while they send email. ( user could send mails with subject , w/o subject...otherwise i was thinking some email template as alternative but the solution i am more
interested in , will it be possible to segrate emails based exchange settings or AD settings while having single email ID for all .Hello,
You don't need to create emails for each lists . You have required only one email id and by using that you can configure Incoming email setting in Sharepoint.
For the same you can follow below steps .
1) Open Sharepoint Central Administration.
2) Navigate to to System Sttings ->Configure incoming e-mail settings.
and do the below settings
Enable sites on this server to receive e-mail? -> Yes
Settings mode: -> Automatic
Use the SharePoint Directory Management Service to create distribution groups and contacts? -> No
E-mail server display address: -> youremailserver.domain.com, this is the default
Safe E-Mail Servers -> Accept mail from all e-mail servers
I hope this will help you to resolve your problem .
Best Regards Kuldeep Verma
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful. -
How to resolve hang issue in Iphone 4s with IOS 7
how to resolve hang issue in Iphone 4s with IOS 7
Hi there ECMA IPHONE,
The article linked below provides a lot of great information and troubleshooting tips that will most likely help you resolve the issue sending emails from the specific email account on your iPhone 4s.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Ciao,
-Jason -
How to resolve deadlock in ssrs subscriptions
Hi ,
i have a subscription which is sending emails to my multiple clients ..
subscription runs fine when there are only two recepients and gets errored as i list 3rd recepient in
To field.
i found that
, it is deadlock issue
and when i create trace in SQL profiler on my server database and select deadlock graph event
and it is caught ..
have a look on image ..
but i dont understand how to resolves issue using this ...
can anyone narrate this graph to identifiy ..
Dilip Patil..Hi Dilip Patil,
According to your description, you configured subscription to send emails to multiple users, it works fine when there are only recipients, if there are three recipients, you will get deadlock error.
A deadlock occurs when two system server process IDs (SPIDs) are waiting for a resource and neither process can advance because the other process is preventing it from getting the resource.
For Node 1, an exclusive (X) lock is being held by SPID 66 on an index KEY on the object. Node 2 shows that an exclusive (X) lock is being held by SPID 65 on an index key on the same object. For each node, is the Requested By section, which details any resource
requests that cannot be granted, due to blocking. For Node 1, we can see that that SPID 66 is waiting for a shared read lock on the index key (it is blocked by the X lock held by SPID 65). For Node 2, we can see that SPID 65 is waiting to acquire a shared
read on the index key (it is blocked by the X lock held by SPID 66).
In this case, we need to kill one of the SPID to free the resources and allow the other SPID to continue.
For detail information about Handling Deadlocks and Minimizing Deadlocks in SQL Server, please refer to the following document:
https://www.simple-talk.com/sql/database-administration/handling-deadlocks-in-sql-server/
https://technet.microsoft.com/en-us/library/ms191242(v=sql.105).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??
Error Description:
The number of denied connections from the source IP address 10.0.0.X exceeded the configured limit. This may indicate that the host is infected or is attempting an attack on the Forefront TMG computer.
electrifyingHi,
this may be a false/positive log record.
First check the services and applications on the effecting machine (NETSTAT -ANO) to see which connections the machine has established or tries to establish.
Check the machine against viruses and spyware.
if you don't find any viruses / spyware or "mysterious" connections, create a connection exception limit in the flood mitigation settings on your TMG Server:
http://www.isaserver.org/articles-tutorials/configuration-security/TMG-Firewall-Flood-Mitigation-Part1.html
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote
Maybe you are looking for
-
why doesn't the graphics appear when I click on an app for description?
-
Cross platform javascript Reader detection
Is there a javascript or vbscript to detect the installation and version of Reader on a users machine? I have located a couple of scripts that worked on both IE and Mac for versions 8 and below. I installed Reader v9 and I can still detect that it is
-
Photoshop CS6 extended with Nik Collection
I have the Photoshop CS6 extended version, I have purchased & downloaded the Nik Collection to use with my program, but every time I try to use the Nik Collection it shuts down my Photoshop CS6 extended. I have deleted it and re-downloaded and that
-
Because I can not close iPhoto I can not update my comuter because my computer can not restart.
-
Error in 0BWTC_C08 cube
Hi Gurus, I have one requirement where i need to create a query on cube 0BWTC_C08 .However this cube is not in production as it has some problem and did not move to Production,now my task is to get rectify that error in Development and need to move i