How to resolve error "No SOAP Envelope but 1 {} PARAMETERS"

Hi,
I have configured an interface where the sender (SAP system) sends out a message via proxy on the Local Integration Engine, which is after XI processing supposed to be posted via HTTP (using the SOAP Adapter).
The message is processed correctly by XI, but fails to pass the SOAP Comm Channel. The error message in the Communication Channel Monitoring reads:
SOAP: call failed: java.io.IOException:No SOAP Envelope but 1 {} PARAMETERS; HTTP 200 OK
Can anyone help me understand what this means and how I can resolve this? Thanks!

Dear Johannes,
Is the SOAP call taking place synchronously ? It looks like at the end of your SOAP channel, system is not responding as expected by XI (you seem to receive the regular HTTP 200 OK code, but it does not match SOAP protocol requirements) ...
I've had such issues when web services were down due to web server issue (in this case, you just get, for instance, HTTP 500 response body, which not really SOAP compliant)
Rgds
Chris

Similar Messages

No SOAP Envelope but 1 {'}Values; HTTP 200 OK

Hi Experts,
I am configuring a scneario IDOC to SOAP , Asynchronous call to an https url that is available through internet.
When I try to post message to this url. I am getting following error:
SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 {'}Values; HTTP 200 OK
in SOAP Adapter Log. Due to this error the message is set to NDLV.
I am using PI7.1
My Receiver Channel configurations are as contain
the third party url https://target with username password authentication. I have also imported client certificates.
Webservice host says its a problem with PI system and SAP says that its issue with Webservice.
Please let me know how can I resolve this issue. Am I missing something in my configuration. This is kind of a burning issue currently any help will be appreciated.
Regards,
Raj

Hi Raj,
This looks strange. If the error text is telling the truth, your SSL connection was working and you could even reach some service that returned HTTP 200 OK. But this service didn't return a SOAP response. I don't know what 1 {*} Values means. It sounds broken to me. You can open a ticket.
But the reason why you didn't get a valid SOAP response (either a good one or a fault) is probably that your target URL is incorrect. Verify the URL and run the scenario with the relevant components (refer to the SOAP adapter FAQ note) on DEBUG. The default trace file should give you more information about this apparently corrupted response.
Best regards, Yza

TS3694 How to resolve error code 1015 in restoring apple iphone. Please guide

How to resolve error code 1015 in restoring apple iphone. Please guide.

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

HT201210 how to resolve error 1015

how to resolve error 1015

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

What is your operating system? Reader version?
You get this error when doing what?

TS3694 Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!

Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!

https://discussions.apple.com/message/18540882#18540882

HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.

TS3694 how to resolve error code 1015 ?

how to resolve error code 1015 ?

Generally means you've jailbroken your phone & will most likely never be able to install a stock firmware on it.

HT1414 how to resolve error 1015 while restoring iphone3g to 4.2.1

How to resolve error 1015 while restoring iphone 3g to ios 4.2.1

This error is returned by jailbroken iPhones. Sorry, can't discuss such iPhones as per terms and conditions of this Forum.

How to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY

Hi Expert,
Please tell me how to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY
Thanks and Regards

Google is obviously broken for you: so I've posted what you need to put into your browser.
https://www.google.co.uk/search?q=ORA-01033

HT4623 how to resolve error 3014

how to resolve error 3014?

http://support.apple.com/kb/TS3694#error3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com.

TS1424 how to resolve error 3194

how to resolve error 3194??

Just the usual diagnostic steps. Reboot your computer. Use a USB port directly on the computer, not a hub, disable security software - antivirus and firewall - completely remove iTunes, then download and install a clean copy (current version if 10.2.2), create a new user on your computer and try updating as that user, try a different computer.

WCF request with utl_dbws how to add Header into SOAP envelope

I’m trying to make WCF (Windows Communication Foundation) request and using for that utl_dbws package.
After making request (calling utl_dbws.invoke) it will give error “ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect t”
I turned on logging (utl_dbws.set_logger_level) I see that system sends standard SOAP envelope and does not have Header at all. How can I use my own SOAP envelope and/or add Header.
All info that logging give is:
ServiceFacotory: oracle.j2ee.ws.client.ServiceFactoryImpl@eec8c59c
WSDL: null
Service: oracle.j2ee.ws.client.BasicService@7c110d23
*** Created service: -677524827 - oracle.jpub.runtime.dbws.DbwsProxy$ServiceProxy@562bd0c4 ***
ServiceProxy.get(-677524827) = oracle.jpub.runtime.dbws.DbwsProxy$ServiceProxy@562bd0c4
getOperationInfo return NULL: port={http://tempuri.org/Service/}BasicHttpBinding_Service, operation={http://tempuri.org/Service/}GetLov
setProperty(javax.xml.rpc.soap.http.soapaction.use, true)
setProperty(javax.xml.rpc.soap.http.soapaction.uri, http://tempuri.org/Service/GetLov)
setProperty(javax.xml.rpc.encodingstyle.namespace.uri, http://www.w3.org/2005/08/addressing)
setProperty(javax.xml.rpc.security.auth.username, DefaultUser)
setProperty(javax.xml.rpc.security.auth.password, MySecretPassword)
<GetLOV xmlns="http://tempuri.org/"> <request xmlns:d4p1="http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <d4p1:AgentCode>AGENT</d4p1:AgentCode> <d4p1:Language>ENG</d4p1:Language> <d4p1:ProcessName>test</d4p1:ProcessName> </request></GetLOV>
Attribute 0: http://tempuri.org/: xmlns, http://tempuri.org/
createElement(GetLOV,null,http://tempuri.org/)
Attribute 0: http://tempuri.org/: xmlns, http://tempuri.org/
dbwsproxy.element.node.child.0: 1, null
dbwsproxy.add.map: d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
Attribute 0: http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request: xmlns:d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
dbwsproxy.add.map: i, http://www.w3.org/2001/XMLSchema-instance
Attribute 1: http://www.w3.org/2001/XMLSchema-instance: xmlns:i, http://www.w3.org/2001/XMLSchema-instance
createElement(request,null,http://tempuri.org/)
dbwsproxy.add.soap.element.namespace: d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
Attribute 0: http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request: xmlns:d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
dbwsproxy.add.soap.element.namespace: i, http://www.w3.org/2001/XMLSchema-instance
Attribute 1: http://www.w3.org/2001/XMLSchema-instance: xmlns:i, http://www.w3.org/2001/XMLSchema-instance
dbwsproxy.element.node.child.0: 1, null
dbwsproxy.lookup.map: d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
createElement(d4p1:AgentCode,null,http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request)
dbwsproxy.text.node.child.0: 3, E01306
dbwsproxy.element.node.child.1: 1, null
dbwsproxy.lookup.map: d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
createElement(d4p1:Language,null,http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request)
dbwsproxy.text.node.child.0: 3, ENG
dbwsproxy.element.node.child.2: 1, null
dbwsproxy.lookup.map: d4p1, http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request
createElement(d4p1:ProcessName,null,http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request)
dbwsproxy.text.node.child.0: 3, tesr
request:
<GetLOV xmlns="http://tempuri.org/">
<request xmlns:d4p1="http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request" xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://tempuri.org/">
<d4p1:AgentCode>AGENT</d4p1:AgentCode>
<d4p1:Language>ENG</d4p1:Language>
<d4p1:ProcessName>test</d4p1:ProcessName>
</request>
</GetLOV>
13.05.2010 14:17:28 oracle.j2ee.ws.client.ClientMessages infoAboutToInvokeCallForEndpoint
INFO: Trying to connect to URL: https://x.y.z/WS/ Service.svc
13.05.2010 14:17:30 oracle.j2ee.ws.client.StreamingSender _sendImpl
FINE: StreamingSender.request:<?xml version="1.0" encoding="UTF-8"?><env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><env:Body><GetLOV xmlns="http://tempuri.org/"><request xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns:d4p1="http://schemas.datacontract.org/2004/07/x.y.z.LOV.Request"><d4p1:AgentCode>AGENT</d4p1:AgentCode><d4p1:Language>ENG</d4p1:Language><d4p1:ProcessName>test</d4p1:ProcessName></request></GetLOV></env:Body></env:Envelope>
13.05.2010 14:17:30 oracle.j2ee.ws.client.StreamingSender _sendImpl
FINE: StreamingSender.response:<?xml version="1.0" encoding="UTF-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Body><s:Fault><faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher">a:InternalServiceFault</faultcode><faultstring xml:lang="et-EE">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.</faultstring></s:Fault></s:Body></s:Envelope>
Exception in thread "Root Thread" javax.xml.rpc.soap.SOAPFaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.
     at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:559)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
     at oracle.j2ee.ws.client.dii.CallInvokerImpl.directInvoke(CallInvokerImpl.java:705)
     at oracle.j2ee.ws.client.dii.BasicCall.directInvoke(BasicCall.java:692)
     at oracle.j2ee.ws.client.dii.BasicCall.invoke(BasicCall.java:598)
     at oracle.jpub.runtime.dbws.DbwsProxy$CallProxy.invokeProxy(Unknown Source)
     at oracle.jpub.runtime.dbws.DbwsProxy$CallProxy.access$2600(Unknown Source)
     at oracle.jpub.runtime.dbws.DbwsProxy.invokeProxy(Unknown Source)

HTTP is HTPP... mostly.
In other words, the application protocol is stand and specified in RFC2616 (http://www.w3.org/Protocols/rfc2616/rfc2616.html)
The exception is specific proprietary extensions.. like for example Microsoft's NTLM authentication handshake.
The UTL_HTTP interface supports the protocol pretty well as per the protocol's specification. So using it to interact with a a web service should not be a major issue. The protocol is standard (e.g. POST command is used to supply the payload to the web service). The only real issue is formatting the payload for that as per what the web service expect. And that has nothing to do with HTTP itself - or UTL_HTTP. It is simply the delivering mechanism.
Getting that mechanism to work is fairly easy and should not pose a problem. Instead I suggest you focus on exactly how the HTTP payload needs to look like. Does that web service expects any specific name-values in the header? What does it expect in the body? Etc.

How to resolve error - 502 web server error ?

Hello,
Kindly consider following scenario:
Custom control is programmatically creating site using following code. Once site get created, it redirecting to its settings.aspx page:
try
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite
site1 = new
SPSite(SPContext.Current.Site.ID))
SPLongOperation.BeginOperation
beginOperation = null;
if (beginOperation ==
null)
                         beginOperation =
delegate(SPLongOperation
longOperation)
                             site1.WebApplication.Sites.Add(site1.RootWeb.Url
+ "/manPath/site1,
Site1, "", 1033,TemplateName,
__userLoginName, __userName,__userEmail);
                             longOperation.End(site1.RootWeb.Url
+ "/manPath/site1/_layouts/settings.aspx");
SPLongOperation.Begin(beginOperation);
Same code works perfect at development machine, while in production it gives 502 web server errors.
Please check below error text:
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Results in Development machine: site gets created and redirects to its site settings page as expected.
Results in Production machine: During the process it throws 502 web server errors, while site has got created successfully.
I am not sure why it happened, while previously it was working. I have feeling that may be redeployment should resolve the issue, but I want to know root cause of this issue!!
Note : the same settings page is working well, when I open it manually in production environment!
Please let me know the approaches to resolve this issue? Also, let me know if you need any further information on same.
Thank you to look at this issue !
Kind Regards,
Dipti Chhatrapati

Hi, I have found the things where is the issue , but still I am looking for the resolution !
To add further on above issue, I have observed as below :
Client machine: Following
error is getting throw when creating new site.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content
server, it received an invalid response from the content server.
WFEs
machine : Error is not getting display when creating new site.
And hence , it looks like load balancing/IIS issue, however I am not sure how to resolve the same !!
Please let me know your thoughts !
Thanks and Kind Regards,
Dipti Chhatrapati

How to resolve error with code: 0xe7210001 cannot load powrprof, object:cls

Hello there
Doses anybody know how to resolve the error with code: 0xe7210001, message: cannot load powrprof, object:clsd-not-found;
OR: Fingerprintsoftware error OR: THotkey.exe message window multiplicates and computer freezes
Scanned maleware and viruses, also in safe mode, found no infection, reinstalled fingerprint driver but nothing changed.
grateful for help!

Hello
> message: cannot load powrprof, object:clsd-not-found;
In my opinion this would mean that there is a problem with Toshiba Power Saver
What Toshiba notebook you have exactly?
Maybe reinstalling Power Saver could help. You can find it on official Toshiba website.

How to resolve error "No SOAP Envelope but 1 {} PARAMETERS"

Similar Messages

Maybe you are looking for