How to resolve error w/ procedure setLimit?

Hi,
My enviorment is;
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
Error when running backup is;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on diskmedia channel at 05/13/2008 15:51:04
ORA-19586: 5 k-byte limit is too small to hold piece directory
Looking on line via Google and Metalink I see that I am suppose to fix this w/ procedure setLimit, I do not see anything on this. In the RMAN docs I only see that it is a reserved word. Can anyone explain how setLimit works?
Thanks,
Steve

Thank you, found that
MAXPIECESIZE was 5120, forgot the M so this was only bytes
Thanks again
Steve

Similar Messages

  • How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

    How to resolve Error  "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

    What is your operating system?  Reader version?
    You get this error when doing what?

  • TS3694 How to resolve error code 1015 in restoring apple iphone. Please guide

    How to resolve error code 1015 in restoring apple iphone. Please guide.

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • TS3694 Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!

    Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!

    https://discussions.apple.com/message/18540882#18540882

  • HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

    how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

    From the article that the question was posted from:
    Error 1611
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Try reading the solutions you find in the future and follow them.

  • TS3694 how to resolve error code 1015 ?

    how to resolve error code 1015 ?

    Generally means you've jailbroken your phone & will most likely never be able to install a stock firmware on it.

  • HT1414 how to resolve error 1015 while restoring iphone3g to 4.2.1

    How to resolve error 1015 while restoring iphone 3g to ios 4.2.1

    This error is returned by jailbroken iPhones. Sorry, can't discuss such iPhones as per terms and conditions of this Forum.

  • How to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY

    Hi Expert,
        Please tell me how to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY
    Thanks and Regards

    Google is obviously broken for you: so I've posted what you need to put into your browser.
    https://www.google.co.uk/search?q=ORA-01033

  • HT201210 how to resolve error 1015

    how to resolve error 1015

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • HT4623 how to resolve error 3014

    how to resolve error 3014?

    http://support.apple.com/kb/TS3694#error3014
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com.

  • TS1424 how to resolve error 3194

    how to resolve error 3194??

    Just the usual diagnostic steps. Reboot your computer. Use a USB port directly on the computer, not a hub, disable security software - antivirus and firewall - completely remove iTunes, then download and install a clean copy (current version if 10.2.2), create a new user on your computer and try updating as that user, try a different computer.

  • How to resolve ERROR-29 in outbound program of ABAP?

    Hi All,
        I am trying to send idocs from SAP to NON SAP ,In WE02 i am getting error
    Receiver of IDoc is its own logical system
      its error number is 29.i.e.Error in ALE service.If any body knows how to resolve this issue post your valuable message.
    Regards,
    K.S.L.Neelima

    Hi Neelima,
    Check out the Outbound Program logic which actually triggers the Idoc. The below message means that you were trying to send the Idoc from same System to the same system(If its a different client then it is OK)Sender and receiver Systems are the same.Check whether you have populated the control Record Information correctly or not.
    Best Regards

  • How to resolve error 3036

    how can i resolve error 3036

    Try using search and inputting the error message.
    You will be amazed at what can be found when a little effort is put into looking for answers.

  • How to resolve error - 502 web server error ?

    Hello,
    Kindly consider following scenario: 
    Custom control is programmatically creating site using following code. Once site get created, it redirecting to its settings.aspx page:
    try
    SPSecurity.RunWithElevatedPrivileges(delegate()
    using (SPSite
    site1 = new
    SPSite(SPContext.Current.Site.ID))
    SPLongOperation.BeginOperation
    beginOperation = null;
    if (beginOperation ==
    null)
                             beginOperation =
    delegate(SPLongOperation
    longOperation)
                                 site1.WebApplication.Sites.Add(site1.RootWeb.Url 
                      + "/manPath/site1,
    Site1, "", 1033,TemplateName,
    __userLoginName, __userName,__userEmail);
                                 longOperation.End(site1.RootWeb.Url
    + "/manPath/site1/_layouts/settings.aspx");
    SPLongOperation.Begin(beginOperation);
    Same code works perfect at development machine, while in production it gives 502 web server errors.
    Please check below error text:
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Results in Development machine: site gets created and redirects to its site settings page as expected.
    Results in Production machine: During the process it throws 502 web server errors, while site has got created successfully.
    I am not sure why it happened, while previously it was working. I have feeling that may be redeployment should resolve the issue, but I want to know root cause of this issue!!
    Note :  the same settings page is working well, when I open it manually in production environment!
    Please let me know the approaches to resolve this issue? Also, let me know if you need any further information on same.
    Thank you to look at this issue !
    Kind Regards,
    Dipti Chhatrapati

    Hi, I have found the things where is the issue , but still I am looking for the resolution !
    To add further on above issue, I have observed as below :
    Client machine: Following
    error is getting throw when creating new  site. 
    502 - Web server received an invalid response while acting as a gateway or proxy server. 
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content
    server, it received an invalid response from the content server. 
    WFEs
    machine : Error is not getting display when creating new site.
    And hence , it looks like load balancing/IIS issue, however I am not sure how to resolve the same !! 
    Please let me know your thoughts !
    Thanks and Kind Regards,
    Dipti Chhatrapati

  • HT204053 How to resolve "error while trying to connect to the server."

    Receive "error while trying to connect to the server" on my PC when using iCloud. How to resolve?

    check the below link.
    /people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

Maybe you are looking for

  • CS4 Master Collection Application Verion Info ???

    Can someone please provide me the Version #'s to each of the applications in CS4?  The only info I can find online is written like this "Adobe Photoshop CS4" and so on for each application, however, Photoshop CS4 is version 11.0 if I'm not mistaken. 

  • Bootcamp asks to download windows 7

    As soon as I open bootcamp I am given the option to download the lastest windows support software from Apple and install Windows 7. I am trying to install Windows 7 with a disc, does that mean that I get Windows 7 free of charge? I am a bit confused.

  • I need a RAW converter program and the adovbe system has been recommended.  how shall I proceed?

    I need a RAW converter program and the Adobe system has been recommended.  How do I proceed?

  • SQL error in ALV_GRID

    Hi friends, When i use   DATA:  GRID TYPE REF TO CL_GUI_ALV_GRID. i  m getting the error like following " SQL error 1654 occurred when accessing program "Z1V10007 " part "LREF". " How to resolve this probelm ??? Thanks in advance Ajay kumar

  • How to register PPE by Bapi or FMs

    I have created a program for registering PPE in the Batch input way. But it fails in background mode. Is there any other way such as Bapi or FM to do it ? Thanks