How to resolve failures in picture transfers?

When saving scanned pictures into iPhoto library, occasionally the picture will not transfer after I click Save. How can I resolve this occasional failure to transfer?
Message was edited by: Moderator

Probably post to the iPhoto forum area may be a faster solution:
http://discussions.apple.com/category.jspa?categoryID=143

Similar Messages

Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system. Aircard will not stop self-assigning IP address. Any ideas how to resolve successfully?

Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had. After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8. I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure. Only way to my home network and router is ethernet now. Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

When see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a General Failure box stating 'The system cannot find the file specified' yet it still goes to the specified page. Any ideas on how to resolve this

I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a box stating
General Failure. The URL was "http:// etc etc".The system cannot find the file specified.
Yet it still goes to the specified page. Any ideas on how to resolve this

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

Error message "Transient resolver failure" how do i fix this?

i tried typing "pacman -Syy" and on every file it tried updating it said "Transient resolver failure". What is this, and how do i fix it?

gowireless wrote:thanks, i fixed it , it was the network,
Please read http://wiki.archlinux.org/index.php/For … way_Street
Thanks, and enjoy.

HT201077 I accidentally grabed my My Photo Stream from My Pictures & transfered it to a FOB. Now I can't view any of the pictures from my phone & I cant up load any. How do I fix this?

I accidentally grabed my My Photo Stream from My Pictures & transfered it to a FOB. I put it back as soon as I realized. Now I can't view any of the pictures from my phone & I cant up load any. How do I fix this?

Thanks, Eric. I'm not sure what I should be checking using your suggestion--as I said, I'm an utter novice with the iMac. However, I saw a reference to problems with the Library entries, so I checked mine and the iWork files were missing, something confirmed when I checked the crash log. In desperation, I did another software update, and that seems to have fixed the problem completely. Now wondering if I dare upgrade to Lion!

HT1976 i have iphone 3gs 8gb when i put sim then i got sim failure message or no sim card installed how to resolve it?

i have iphone 3gs 8gb when i put sim then i got sim failure message or no sim card installed how to resolve it?

Put in a supported SIM from the carrier that locked the iPhone.

How do I delete pictures transferred from my computer onto my iphone?

How do I delete pictures transferred from my computer onto my iphone?

You delete them the same way they got there, through the iTunes sync process. Deselect what you don't want on your phone under the photos tab, then hit the apply/sync button.

HT1539 while transferring a digital copy to itunes disc was ejected and transfer was cancelled now i am unable to redeem code again. any ideas how to resolve ?

while transferring a digital copy to itunes disc was ejected and transfer was cancelled now i am unable to redeem code again. any ideas how to resolve ?

You welcome

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

HT4236 Syncing photos using iTunes in windows revealed this error message "iPad Jayvee cannot be synced because it cannot be read from or written to ." Please advise asap how to resolve the issue. Thanks!

Please advise how to resolve error message - cannot be synced because it cannot be read from or written to.

Hello Janet,
I would recommend this article named 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod found here http://support.apple.com/kb/ht1207
Outdated operating system software
Make sure you have the latest updates for your operating system, which may include improvements for device connections. For example, many USB and FireWire improvements have been included in Windows Service Packs.Check for Mac OS X downloads. Check for Windows updates.
Computer needs updates
Make sure you have the latest updates available for your specific computer model (or components for home-built PCs). These are usually available for download on the support website for the maker of the PC (or component). Many USB updates are listed as "Intel chipset" or just "chipset" updates on PC manufacturer's support and download websites.
Software interference
Some software can interfere with iTunes, making it unable to write files to your iPod. Think about what software you have installed, and try disabling any add-ons that might be interfering with iTunes. Check your suspected software's documentation or contact the software maker if you need assistance with disabling the application. Out-of-date or incorrectly configured security software frequently causes this issue. See these steps for identifying and troubleshooting third-party security software.
Damaged files
If one of your music files or photos is damaged, iTunes may display one of these errors when transferring that file to the iPod. If you identify a file that is causing the error, try deleting that file and reimporting it from a backup file or from the original source. You may be able to repair files by repairing the disk (see the solutions in the next section).
Unregistered .dll files (Windows)
Malware or other software may cause an issue with the digital signing of Windows XP drivers. First try restoringthe iPod using the latest version of iTunes.. If you are unable to restore it or the symptom reappears, follow the steps in this document.
Damaged disk structure
These errors can also appear if the format of your computer's hard drive or your iPod disk is damaged.
To repair your computer's hard disk—Mac OS X users, read this article for instructions. Windows users, search the Help system in Windows for chkdsk to get more information on checking and repairing the disk structure.
To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
Corrupt iPod photo Cache
If you're getting the error when transferring photos to an iPod photo, try deleting the iPod photo Cache and then starting the photo sync again.
Lost connection
Make sure that the connections from your computer to the iPod are snug and do not wiggle or come loose during transfers. For example, if you use the wrong size dock for your iPod, it can put strain on the connectors and cause a bad connection. See these articles for more information:
Learn about iPod Universal Dock
iPod Dock: Specifications
Conflict with third-party hardware
Third-party USB or FireWire devices may also interfere with iTunes' ability to communicate with your iPod. Remove all USB and FireWire devices except the keyboard and mouse before reconnecting your iPod to the computer.
Bad hardware
Hardware failure or non-compliant hardware can cause these errors. This could be an issue with iPod hardware or with the cable or dock you're using, but more often it's an issue with the USB or FireWire card or interface in your computer. Some USB and FireWire interfaces just don't work very well. If you isolate the issue to the USB or FireWire interface in your computer, you may want to try a different port, get the computer serviced, or replace the card or interface with a better one.
If you isolate the issue to an Apple-supplied cable or dock, or the iPod itself, you can get it serviced here.
Take care,
Sterling

I have an issue syncing my iPhone 4 with itunes. This has only happened the last few times i have tried but don't know how to resolve it. Please help.

Hi, the last few times i have tried to sync my iPhone 4 to my itunes it won't work. I plug my phone into my computer, to sync any new pictures i have taken or add my new music i have bought on my phone, and hit sync. It appears to start syncing then an error message appears saying the following:
The iPhone 'my iPhone' cannot be synced. You do not have enough access privileges for this operation.
I'm not sure what this means or why this keeps happening. I have the latest iTunes and i have not done anything different. It appears to have wiped some of my music from my iPhone and a number of my photo albums off. Please can someone help or advise how i resolve this issue. Thanks.

When you set up iOS7 the second screen specifically asks that you create a four digit code .
That's what you now need to re-enter in your phone.
Once entered you can go to system/general/Passcode lock
Re-enter the same code and choose turn Passcode off
iOS 7 has been designed to enforce minimum passcode security by default or in the case of the new 5s use of finger print level security.

How do I transfer my pictures from iPad to windows 7 operating computer?

How do I transfer my pictures from iPad to windows 7 operating computer?

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
There's also some apps that will transfer via wifi. Using these apps may be the easiest way of transferring your Photos and Videos to your computer and other iOS devices.
Simple Photo & Video Transfer
https://itunes.apple.com/us/app/simple-photo-video-transfer/id420821506?mt=8
Simple Transfer App
https://itunes.apple.com/us/app/simple-transfer/id411292121?mt=8
Easy Media Transfer : Useful App for Wireless Transfer
http://apps400.com/iphone-apps/easy-media-transfer-useful-app-for-wireless-trans fer.html
Photo Transfer
http://www.phototransferapp.com/
Copy Photos (& Videos) Between iOS Devices
http://tinyurl.com/cnz95bc
 Cheers, Tom

How do I get my pictures from my Bloggie TS10 onto a flash drive or memory stick?

How do I get my pictures from my Bloggie TS10 onto a flash drive or memory stick
Solved!
Go to Solution.

Hi Tom,
Welcome to Sony Community!
Pictures cannot be transferred directly to flash drive or memory stick. You can transfer them to computer and then to flash drive or memory stick.
If my post answers your question, please mark it as an "Accepted Solution."
Thank you for your post.

How do you determine the picture that is shown on iTunes for your podcast?

How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

RMAN-20021(How to resolve)

Version:10.2.0.1.0
OS: windows XP
After registering the target database with recovery catalog(another database).
when i am trying to create a local script, i am getting the below error.
RMAN-03009: failure of create script command on default channel
RMAN-20021: database not set
How to resolve this..

From the online docs you regrettably failed to search before posting
RMAN-20021 database not set
Cause: This an internal error.
Action: Contact Oracle Support Services
Sybrand Bakker
Senior Oracle DBA

How to resolve failures in picture transfers?

Similar Messages

Maybe you are looking for