How to resolve ip address of all connected computer in network

Hi,
I want to resolve IP address of all connected computer in intranet.
I want to broadcast the message in network.
Which api I have to use for it?

I want to resolve IP address of all connected
computer in intranet.You won't get hold of that information if the network is configured correctly.
Kaj

Similar Messages

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. Still no connection.The "wheel" turns for 2 sec. then stops w/o connecting?

My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 secOne then stops without connecting. Anyine have a solution to this issue?

I have an AT&T contracted iphone 5. Cannot send mms to anyone but other iPhone users. If you search the Internet, you'll see that the problem is everywhere...both the carriers and Apple are actling like the problem belongs to the other, or feigning any knowledge (which is kind of funny since the no MMS thing was in an ios6 beta that was released awhile ago, so I KNOW apple knows about it). No, I'm not running a beta (obviously, I just got my iphone 5). Awesome. Have a great camera on this thing, but cannot send OR receive MMS from anyone other than other iphone users. Gotta love it.

How to find mac address of a client computer in specified time and port in WIFI WCS Control system

how to find mac address of a client computer in specified time and port in WIFI WCS Control system

WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes.

HT204053 How to resolve "error while trying to connect to the server."

Receive "error while trying to connect to the server" on my PC when using iCloud. How to resolve?

check the below link.
/people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

How can I see what equipment is connected to my network?

I use a Time Capsule for my home network. Is there a way for me to see each device that is connected to my network at any given time?
There has been an unknown device continue to show up in finder under "shared".... I've reset my network password a couple times and the device continues to show up. (Its identified as "npica53cf")
Thank you

Its identified as "npica53cf"
I think HP has used default network printer hostnames in the format: npi + last 6 digits of the device's MAC address (e.g. "ca53cf").

How can i load a swf AND connect to a network location?

I'm working on a fairly large framework application that
consists of a large number of seperate files (swfs, stylesheets,
xml etc etc) all being loaded in and then connecting to a remote
server.
My problem is that when i compile all my library swfs with
-use-network=false all is well - until i try a
NetConnection.connect() call, when i get told i can't connect to an
internet url from a local-with-filesystem swf.
Ok, so i created a .cfg file and placed it in the
FlashPlayerTrust directory, indicating that i'm giving permission
for everything in my 'deploy' directory to be trusted - which
should allow it to do anything it like (load files AND connect to
the network). But after doing that i no longer get any sandbox but
my NetStatusEvent is never fired! I receive neither a success or
failure message from the NetConnection... it just sits there and
nothing happens...
Can anyone point me in the right direction, there seems to be
precious little information about situations like this, just a lot
of people asking similar questions...
Thanks
T

like i said in the original post the framework is a series of
libraries, they're loaded at runtime depending on what's required.
if i have the netconnection in a single swf it'll work in the
standalone player or in IE or FF.... it'll work if i launch it
locally and connect to a remote server, or when i put it on the
server and access it through a browser.
it's when it goes into one of the libraries that it fails -
so a base swf loads a configuration file which tells it which
libraries it'll need, one of those libraries contains the
netconnection code - and the NetStatusEvent of the NetConnection is
never fired - so i neither succeed nor fail in my connection
attempt
T

WES610N - only one MAC address for all connected devices

Hi! I use a WES610N 4-port WLAN bridge to connect my audio and video devices (Pioneer AV receiver, Samsung TV set and a WD Live TV box) to my E4200 router upstairs. This works fine and the WLAN connection works stable and fast. There's a Synology 212j NAS running DM 3.2 connected to my E4200 router. On this NAS a DLNA/UPnP media server is running to stream audio and video from the NAS to my Receiver, to my TV set and to the WD Live TV box. Audio and video is ok but i also want to send photos from the NAS direct to the TV and WD Live. To see the photos in the correct solution i have to configure a DLNA profile on the media server for each DLNA client which connects to the media server. I have to configute this based on the device name, IP address and MAC address shown in the clinet list of the media server. So far so good - and here's my problem: Every device connected to the WES610N is seen with the same MAC address - the one of the WES610 - by the media server. This confuses the server and it's not possible to assign a DLNA profile to each of the devices (TV, Receiver, WD box) because the IP - MAC pairing always changes when one of the devices sends data packets to the media server. So the assigned profile configuration gets lost and switches back to standard DLNA profile and photos can not be displayed correct by the devices. So what i would need is that every device connected to the WES610N is seen by the media server by it's on MAC address. Is there a solution or are there plans to implement this in future firmware versions? Thx, BR Christian

You can try the following combination of settings :-
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page)
4] Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the connectivity status...

How to get IP Address of all the clients

Hi,
I am useing oracle 8i on sun solaris and clients are of windows
when quering v$session it gives many details
but does not gives the IP_Address of the clients.
I had used SYS_CONTEXT('USERENV','IP_ADDRESS') but
it gives the details of only the current session.
But I want the IP_Address of all the clients connected and
shown in v$session.
Regards
Arun Tayal

Hi,
From column MACHINE in V$SESSION, you can get the I.P. address:
SQL> select UTL_INADDR.GET_HOST_ADDRESS('localhost') from dual;
UTL_INADDR.GET_HOST_ADDRESS('LOCALHOST')
127.0.0.1In this sample I used localhost, but you can use the column. It might require some additional work (to escape windows domains for example - and ensure all the hosts are known to the system via DNS).
HTH,
Yoann.

How can I get airport to automatically connect to a network again?

Dear helpful ones,
I connect to the internet and a printer via a wireless router. Previously airport automatically logged in to my network. Recently, I had to reset my router and modem. Since then, airport doesn't automatically log in. I need to manually select my network from the airport menu to join after every time the computer sleeps or is shut down. The password is still in the keychain. I didn't think any of my computer setting had changed or needed to...
If anyone can offer a suggestion as to how to get airport to once again automatically log in to my wireless network, this would be most appreciated.
Yours, Jeremy

There's quite a common problem with OS X and getting it to auto-connect, although there are fairly obvious simple ways to solve it they didn't always work, the procedure below is long winded but does have a fairly high success rate.
1. Move "System Preferences.app" to "Applications\"
2. Delete all preferred networks in Network Preferences
3. Delete all Airport password in Keychain Access
4. Restart
5. Choose network from drop-down menu and enter password
6. Restart

How to trace IP address ports and request comming to network interfaces

Hi all,
I am using Solaris IP filter. I need to check the requests that is comming to a patiquler interfaces.
Is there any possibilities to get the IP address: Port, weather the request is Deny from the server etc....
Thanks.
Viraj

Lian,
Did you find a solution?? If still looking, talk to Triometric, they can monitor and log this, a side effect of performance monitoring.
Have fun

How to make a peer to peer connection in a network using sockets

My Project is about a multi agent meeting scheduling system.. I've kept the DB in the server and I only use the server to retrieve data from the database. I have used sockets to communicate with the server.
Each peer in the network is an agent for a perticular user and these agents will be communicating with each other for negotiation purposes..
The problem I have is that, I couldnt communicate wit other peers using sockets.. I couldnt find any sample java code of sockets to overcum this problem.f sumone has a sample code plz send me.
And if there is a more efficient and easy way I can connect these peers except sockets, plz tell me and if u have a sample java code plz be kind enough to send.
This is my final year project in the University
Thank you
Sajini De Silva ([email protected])

Hi Sajinidesilva,
I think you'll find more support in the [JXTA Community|https://jxta.dev.java.net/] for your project. Also, there's an interesting article to start with : [Introduction to the Peer-to-Peer Sockets Project|http://www.onjava.com/pub/a/onjava/2003/12/03/p2psockets.html].

How to create a model and JCO connection

Hi all,
The Userid and Password given while creating new model at Singleserver/Load balancing tab should be same as the userid and password given while creating JCO connection. i.e in JCO creation while mapping modeldata to Application data and Metadata to metadata we will give some userid and password.
will those 2 userids and passwords should be same.
the error which i am getting is
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error connecting using JCO.Client: null
Regards
Padma N

2 userids and passwords need not be same
i got similar problem and this is how i resolved
this is because jco connections are Using SSO and the user who is accessing that webdynpro application is not present in the backend system.
please make sure user is there in the backend system from which you are getting data
xxxxxxxxxxxxxxxxxxxxx
Edited by: Armin Reichert on Feb 18, 2008 7:26 PM

How to view MAC addresses on the network?

I can log into other non-apple routers via browser and see a list of MAC addresses of equipment connected to the network, but I don't see how to view them if using my Airport Extreme and going in through Airport Utility.
Any thoughts?

If It's the same Mac that can see the PC, it's already set up correctly. Something must be wrong somewhere.

TS1702 pre installed Maps software is not showing directions as it was showing previously , how to resolve this issue

A pre installed software , Maps , not showing direction between two locations , as it was showing previously , it can't be removed even , since pre installed , plz help how to resolve this issue , regards

Not all features are available in all countries. This article explains:
http://www.apple.com/ios/feature-availability/

How to resolve ip address of all connected computer in network

Similar Messages

Maybe you are looking for