How to resolve problem for transport request which imported 'z' tcode
Hi Expert,
I have requirement from HSBC for Advance Payment Extraction. In this case they donu2019t have source code in text file so that they gave us request number which we imported in IDES. Now bu2019coz of this u2018Zu2019 Tcode created automatically and whatever the u2018 Zu2019 Programs are available also created. But when I will run this tcode and came back that time runtime error is coming I am send you the screen shot and all u2018zu2019 programs are in display mode which I want to be in change mode that is also not possible. Please guide me to proceed.
Rahul,
You will require to Change the Maintenance system for the Object.
Follow below steps:
1) Go to Transaction SE03
2) Select the option "Object Directory" -> "Change Object Directory Entries of Objects in a Request"
3) Put the details for Package, person Responsible and original system of the Object
Change the system and save the entry. This activity will not generate the TR.
Hope this helps!
Regards
Shital
Similar Messages
-
Transaction code to find return code for transport request
Hi,
I want to see the return code for transport requests after importing to QAS from DEV. What is the transaction code to find return code and can you explain in brief.
Thx,
Vasuyou can check it out in STMS
wht you can do is ,,
Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
> then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
Return code
Meaning
0000
Transport performed without errors
0004
Warnings were issued. All objects were transported successfully. There were special actions for individual objects that may not have been intentional, for example, a warning is issued during the export if the request contains an object deletion.
Read the warnings.
0008
Individual objects could not be transported successfully. You must analyze and correct the errors. Examples of import errors: Original object was not overwritten, Repaired object was not overwritten
0012 or higher
A critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
Hope this information will help you ,,
Cheers
dEE -
Regarding Client change for transport request
In 46C system, How to change client for transport request?
Before Upgrade, we have Trans Request-DEVK900002 for client XXX, and this client does not exists anymore. now How to delete this trans request or release it.
one of the way i think is to change client for transport request and release it. Please share your suggestions.
regards
JaichanHi shlesa,
Thanks for your reply.
I tried now..it does not worked out.
i created request at 000 using DDIC and then logged with 001 client using DDIC.
then i executed SCC1, gave Source Client 000 and Request number and executed.
i checked in SE09, was still the Request appeared with 000 client.
Any other alternatives.
Jaichan -
How to register transport requests which is created outside CHaRM
Hi Experts
I have completed the ChaRM configuration in Solution Manager.
Now I want to include the open transport requests (which I have created outside of ChaRM) in ChaRM. Could you please guide me how I can include these open transports in ChaRM.
Thanks in advance
Regards
VenkatHi Prakhar
Thanks for your reply, as per SAP Note 1150426 I have executed the task in the maintenance cycle "Register transport request in tasklist", but the transport request is not added to the Change request.
Then I have tried to execute through sa38 there it's saying "Unable to find the task list / status of task list is not active". we are in ST - SAPKITL434
Could you please check and help me to resolve the issue
Thanks & Regards
Venkat -
How do I AUTOMATICALLY generate Transport request for a Z table data?
Hello friends,
I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
Any ideas?
Your help is greatly appreciated.You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
Also change the "delivery class' in the table attributes to 'C' - Customizing table -
How to assign a new transport request for a program saved in $tmp mode
Hi all,
How to assign a new transport request for a program saved in $tmp mode?Hi,
delete the object fro the package $tmp.
go to change mode, save it.
while saving it will ask for teransport id.
thanks
vinod -
Unable to delete Transport Request which contain locked objects
Hi all,
I need to delete some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these transport requests which are released and also provide a solution to delete instead of releasing them.
Thanks in advance,
Sanaz.Hi,
Thank you for the reply.
1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
2. What are the objects which has been locked and due to that you are facing this problem.
A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
A. I have no idea about "Freight Unit".
Thanks,
Sanaz. -
While creating proxie asking for transport Request/task...
Hi Experts,
This is the first time i am creating proxies. When i entered Spoxy transaction and trying to activate the proxie its asking for package name,Prefix and Transport (Request/Task) .
The transport request shouild be created by network people or we can ignore it and it can created later.
Please guide me on how to proceed further.
Regards
SantoshHi
The prefix name will be used in the creation of Proxy-Interface ABAP Name and in Implemented Class ABAP Name.
You should provide the transport request which will be helpful for further transport from one system to another. -
Released the Transport Request which is in Local Change Request
Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
KarthikHello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe -
Need TP command for Add Transport Request to import Queue all at a time
Hi SAP gurus,
Can you tell the o/s or TP command to Add Transport Request to import Queue all at a time which are available in co files directory ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babuHi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1 column2 column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff -
How to delete role through Transport Request
Hi,
when I am deleting Role it is Not asking me for transport request ..this is what i needed.can anybody solve my problem
regards
GauravHi,
Please check if your role is already locked under some Transport request. If so it wont pop up any TR.
If it is locked under some TR, make sure you detach it from the TR and try again it will pop up a TR screen
Please revert in case of issues
Regards,
Pramod -
How to delete infoobject by transport request?
Hi experts,
I want to delete infoobject from productive system by transport request without deleting this infoobject from development system.
Is it possible? How can I do this?
Thanks!Hi Denis,
Take an approval to open the production system. While you delete the infoobject , it will ask for transport request to save under.
Regards,
KANTH -
Remove unnecessary transport requests which are 7 days old
Hi All,
I would like to delete all the un-necessary transport requests which are displayed in STMS which are more than 7 days old.
But, the import log should be available whenever i need to verify.
Is there any script which can do this?
Thanks
VijayHi,
I do have a similiar situation, I would like to write a script to remove transports that have successfully transported and are over 7 days old. In STMS currently we have a list of every transport that has ever been sent and there is no need. Note that via SE10 we still want to see transport history even for old transports just remove the old ones from STMS. Hopefully I feel some script does this job and no idea on this scripts.
Can someone throw light on this and help me out.
Thanks & Regards,
Bharadwaj. -
Error when creating files for transport request SAPK-700BGINPLMWUI
Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj -
Exit code 4 for transport request
Hello Experts,
I am trying to create a transport on a package in BI.
the purpose is that i should be capturing everything that lies under this package.
while the request was in modifiable state, i did the consistency check, and the request was found to be consistent.
After releasing the transport, it has returned status "Ended with return code 4"
As per my understanding return code 4 means that the system has deleted some of the objects from the request and those wont be written to the target system.
Also, the entry from Table TADIR is deleted.
My worry is, why some of the objects were deleted, and what will be the impact of this in the target system.
Also, how can i identify that which objects were deleted from the request and why?
Pls help
Thanks
ShilpaHi,
the warning is "R3TRROUT065UJB5U3LGNOKY3JKXXHOFZW not found; object also deleted in target system"
in the long test I am able to see the belo:
Diagnosis
Object R3TRROUT065UJB5U3LGNOKY3JKXXHOFZW was not found during export.
System Response
The object is deleted in all systems into which this transport request is imported.
In addition, the relevant TADIR object directory entry is deleted.
but the question is this situation arised, and how to prevent this?
Thanks
Shilpa
Maybe you are looking for
-
This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet i
-
iv made a flash site using as3 using the actionscript on the first frame, this by itself works fine. iv also used an online tutorial to help create a dynamic slideshow/photo gallery which again works fine, but this time using an external .as file. Wh
-
Career transition from ABAP to SD (Certification)
Hi all, I am posting this question again in the right forum .. I need some guidance regarding SAP SD certification ... I have 3 years of SAP ABAP implementation and support experience with some of the top notch Consulting companies , now I would like
-
Slowing down after installing 10.8.5
I've just update my late 2012 iMac's software to 10.8.5 via app store. It downloaded normally and it restarted. After that my mac runs super slow!! changing desktops is too laggy, scrolling pages in safari laggy too. It runs perfectly before update?
-
Need script to delete two MS pref files
As one who can't script my way out of a paper bag, I come here suitably humbled to request help with a script. Every so often, some of my incoming emails in MS Entourage become unreadable due to garbled fonts. The solution is two quit MS Entourage