How to resolve RMAN:06172

Hi All,
This is my first thread.
I am junior Oracle DBA and recently I was told to do a RMAN restoration from a set of backup files which consists 1CT & 5DF files. This back up was taken at some other region.
I created a database to restore the files, I used the command:
rman target /
RMAN> restore control file from '/temp/bkp/ct_784333_p2'
Starting restoring at 22-NOV-11
using channel ORA_DISK_1
RMAN-00571:
RMAN-00569: ERROR MESSAGE STACK FOLLOWS
RMAN-00571:
RMAN-03002: failure of restore command at 11/22/2011 16:10:51
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
Can anyone pls tell me how to solve this issue..
I even tried by creating a pwdfile and pfile from a plain database and edited the pfile. Executed the same command and got the same error.
Then by searching in forums and googling I came to know that I must have at least one physical file that is controlfile to restore.
But unfortunately I don't have one. So kinldy pls tel me anyother way to restore this..
This is quite urgent..
Thanks in advance

I will explain briefly what I did.. I created a db named "alhbtst2" through dbca to restore this backup.
and now I started db in nomount stage and gave the restore command in rman and got the error. i have pasted the output below:
SQL> startup force nomount
ORACLE instance started.
Total System Global Area 1610612736 bytes
Fixed Size 2084400 bytes
Variable Size 385876432 bytes
Database Buffers 1207959552 bytes
Redo Buffers 14692352 bytes
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64 bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$ export ORACLE_SID=alhbtst2
$ rman target /
Recovery Manager: Release 10.2.0.4.0 - Production on Tue Nov 29 15:11:49 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: alhbtst2 (not mounted)
RMAN> set dbid 2995302526
executing command: SET DBID
RMAN> restore controlfile from '/glotam1/temp/cf_t762953633_s6_p1';
Starting restore at 29-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2011 15:12:45
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
As i am new to this, am very much confused can u pls tell me how to restore it..

Similar Messages

RMAN-20021(How to resolve)

Version:10.2.0.1.0
OS: windows XP
After registering the target database with recovery catalog(another database).
when i am trying to create a local script, i am getting the below error.
RMAN-03009: failure of create script command on default channel
RMAN-20021: database not set
How to resolve this..

From the online docs you regrettably failed to search before posting
RMAN-20021 database not set
Cause: This an internal error.
Action: Contact Oracle Support Services
Sybrand Bakker
Senior Oracle DBA

RMAN-00554...How to resolve

RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-04063: package body "SYS.DBMS_BACKUP_RESTORE" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_BACKUP_RESTORE"
ORA-06512: at line 1
RMAN-04015: error setting target database character set to WE8MSWIN1252
Hi,
i am getting this error ,when access a particular database through RMAN.
while checking NLS_characterset in props$ it shows WE8MSWIN1252 only,
How to resolve this errors...?
null

Version-10.2.0.1.0
Hi pavan,
while compiling the DBMS_BACKUP_RESTORE
by giving the command
ALTER PACKAGE DBMS_BACKUP_RESTORE COMPILE body;
it giving compliation error ,
DBMS_BACKUP_RESTORE must be declared & DBMS_SYS_ERROR must be declared.
Dynamic view (props$) will reflect the character set.. is there any other method to see the character set...?

How to start RMAN in linux env?

Hi Gurus,
I am new to RMAN and trying to start RMAN in linux as follows.
$rman
when i am giving rman command ,nothing is comming..the cursor is blinking.
How to resolve the same. I set the following env variable.
===========================
export ORACLE_BASE=/u01/app/oracle
export ORACLE_SID=test
export ORACLE_HOME=$ORACLE_BASE/dbs
export PATH=$PATH:$ORACLE_HOME/bin
===========================
and rman executable is available in $ORACLE_HOME/bin.
$ cd $ORACLE_HOME/bin
$ pwd
/u01/app/oracle/dbs/bin
$ ls -ltr rman*
-rwxr-x--x 1 oracle dba 10457622 Jul 12 2008 rmanO
-rwxr-x--x 1 oracle dba 10457622 Jul 12 2008 rman
$
Please suggest me how to resolve this problem.
Regards
Nagendra.

Nagendra2 wrote:
How to resolve the same. I set the following env variable.
===========================
export ORACLE_BASE=/u01/app/oracle
export ORACLE_SID=test
export ORACLE_HOME={color:#ff0000}$ORACLE_BASE/dbs{color}
export PATH=$PATH:$ORACLE_HOME/bin
===========================
I beleive your "ORACLE_HOME" is incorrect!
This may work better:
export ORACLE_SID=test
ORAENV_ASK=NO
. /usr/local/bin/oraenv
ORAENV_ASK=YES
The above will set your environment variables correctly.
:p

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

How to resolve #Multivalue Error

HI All,
I have a data like below, in this for inpatient data is NULL and as per business requirement if data is null then "0". so i create a variable and drag into inpatient's total column
statement for inpatient is
=If IsNull([total]) Then 0 Else [total] Where ([items]="Inpatient")
items total
Office
4
Utilization
70
Inpatient
it is working and showing as "0"
but when inpatient has value it is showing #multivalue"
Office Visits
4
Non-Emergency ED Utilization
70
Inpatient Stays
40
how to resolve is issue
Please reply i am using SAP BO 3.1 INFOVIEW
Thanks in advance
Ranjeet

Hi Ranjeet,
First thing is you are getting this error because of the where clause used in the variable.
Because in the 2nd case when it has value for Inpatient, it is actually taking the same value for all the 3 cases.
How to remove null value with 0:
1. Remove where clause from the variable and use that variable in place of Total in the table report.
2. Use format number option to place 0 in place of undefined values.
Hope it helps. Please ask if you have any queries.
Regards,
Subrat

TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Maybe here:
IOS 6 App store crash: Apple Support Communities

When i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

How to resolve many-to-many join by 2 one-to-many joins

Hi,
I was asked many times how to resolve many to many relationship between two tables. I read to use 2 one -to- many relationships to resolve this. Can some expalin me when many to many relationship occurs between two tables and how to reslove them with practicle examples. Is there any article on this?
Regards,
Nanda Kishore

Hi,
Please check below link.
http://www.forumtopics.com/busobj/viewtopic.php?p=859029&sid=20d79e3df07b0d8b41aadfbd902bb6b2
http://blog.oaktonsoftware.com/2011/04/bridge-tables-and-many-to-many.html
Thanks,
Amit

How to resolve a host name from IP using JNDI/DNS service provider

Hi
I got two questions on JNDI/DNS service provider:
1) How to resolve a host name when i got an IP
I understand How I do it inverse.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://"+server+"/"+domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(host, new String[] {"A"});
2) This example above works when I specify the domain in the provider url.
If I am not specifing a domain but only the dns server I got an NameNotFoundException.
What should I do if I don't got the domain?
get the availible domains and loop on them?

Hi,
if your DNS server supports that, you can do a reverse DNS lookup. This works as follows:
String server = "your.dns.server";
String domain = "in-addr.arpa";
String ip = "4.3.2.1";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://" + server + "/" + domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(ip, new String[] {"PTR"});1: Use the pseudo-domain in-addr.arpa
2: Use the reverse IP address for lookup, i.e. if your host has 1.2.3.4, use 4.3.2.1!!
3: Request the PTR attribute
see also [http://en.wikipedia.org/wiki/Reverse_DNS_lookup|http://en.wikipedia.org/wiki/Reverse_DNS_lookup]
Martin

How to resolve this Error ORA-04030: out of process memory when trying to a

Hi
I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
structs,krvuinl_InitNewLcr)
Can anyone guide me how to resolve this issue.
Thanks

Hi,
As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
inet:
udp_recvspace = 262144
Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
Nicolas.

How to resolve the error -1073807339 when using Agilent LAN/GPIB Gateway (E5810A)?

Dear Sir/Madam,
Appreciate that you could advise me on the following error occur when connect power meter E4419B to computer via E5810A LAN/GPIB Gateway(remote interface) & run with Labview:
-1073807339
VISA Write in E4419_read_power.vi
I have added 5s timeout to Labview program but the result as previous.
There no error occurs when the power meter to computer via USB/GPIB interface(82357B).
Is it related to E5810A driver or the program I wrote?
How to resolve it?
Attachments:
E4419_read_power.vi ‏16 KB

Hi.
I'm experiencing the same problem when connecting a laser controller (New Focus Vortex TLB-6000) via the Agilent E5810A to a PC.
There are no problems when connected through a regular serial port, but timeouts arise every few seconds through the E5810A. I have another controller (SRS LDC501) which works very well with a second Agilent console.
Have you managed to find a solution to this problem?
Thanks,
Orel.

When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??

When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??

I would understand it if you checked email on your Mac, and then those messages were not available on your iOS devices if you had the advanced account setting "remove copy from server after retrieving message:" set to immediately.
I looked through my iPhone settings and don't even see an option to tell my phone to pull the only copy of a message and delete it from the server.
Possibly there is another setting in Lion (I am running Snow Leopard still) that tells your Mac to only synchronize mail to your iOs devices and is not pulling mail directly from iCloud.
You could try disabling your current iCloud email account in Mac Mail, and adding a new one and just telling Mail it is a standard IMAP account (imap.mail.me.com incoming and smtp.mail.me.com outgoing).
I did that for Leopard to get my email even to work after MobileMe is cancelled and it seems to work fine with my iPhone.
If that doesn't work, you can delete that new email account and re-enable the temporarily disabled iCloud email account from above.
Hope this helps.

How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
Anybody has an idea of how to resolve this?
Thanks,
J

1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

How to resolve RMAN:06172

Similar Messages

Maybe you are looking for