How to Resolve the Broken Dc's on CBS.

Hello all,
I am facing few broken Dc's in CBS. I tried to resolve the broken DC's by the following procedures, but was not able to completely resolve the broken DC's on CBS. few procedures are
1. No built and Deploy errors in NWDI
2.Had released all the activities from transport, no more activity's are in pending state in TSK.
But I am facing broken DC's in compile state, Metadata and Used Dc's. Can any of you suggest me how to resolve the broken DC's on CBS.
Thanks you all,
Anil

Hi Anil,
first of all please notice that I've moved this thread to the NWDI forum.
See the guide:
Understanding Broken DCs and Dirty DCs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
You find some other useful documents in the top-most thread of this page in NWDI forum (SAP NetWeaver Development Infrastructure (NWDI))
Direct link to the thread:
Most important NWDI related guides and documents
The specified item was not found.
Best Regards,
Ervin

Similar Messages

TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Maybe here:
IOS 6 App store crash: Apple Support Communities

I have started to get this error message: 5.1.3 bad address syntax in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?

I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!

Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.

How to resolve the problem in jdeveloper903 oc4j starting:JspTagLib listener error

I just download a jdeveloper903,i hava a problem:
when i start the oc4j alone,it prompt "JspTagLib listener error:null". Then,After depoly the jsp application with JspTag to oc4j,I found the jsp page can not run,but,the jsp application can run in the
develope environment.
how can resolve the problem,help!!Thanks.

I think you might have better luck asking your question in the JDeveloper forum at:
http://forums.oracle.com/forums/forum.jsp?id=315684
later -- Jeff

How to resolve the loop in universe level

how to resolve the loop in universe level

Hi, Kashim
In univese level loops resolved by Chasm Trap and Fan Trap methods.
Chasm Trap: A chasm trap is a type of join path between three tables when two many-to-one joins converge on single table, and there is no context in place that separate the converging join paths.
There is "many-to-one-to-many"relationship beween the three tables in the universe structure.you can define a context for each table at the many end of the joins.
A chasm trap is not dependent on the object types, the query could be made up of only dimensions,only details,or only measures,or any combination of the three types with the "many " tables for chasm to occure.
you can also detect the chasm trap Automatically, tool---->Detect context
To resolve the chasm trap, you need to make two separate Queries and than combine the results Depending on type of objects defined for the fact tables and the type of end user environment,
Fan trap: it is occured when there is a "one-to-many" join to the table that "fans out " into another "one-to-many" join to another table.
Avoid fan trap: The first place by relating all measure objects in the universe to the same table in the universe structure,Avoid placing a measure on anything other than the last table in a in a table path, which is the table with the "many" cardinality attached to it.
This methods is not recomended as it only works for measure objects and may result in inefficienies in processing the query. This resolution works the same for chasm and fan traps.
you can create more alias tables based on your requirement in single universe. and it is true conext, when two or more paths.
Theese methods also apply for resolving loops:
Short cut join also one method for resolving loops
Aggregate aware function used another waty for resolving loops
if you are not resolving the loop result is redusing the number of records.

My ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

my ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

The first thing that I would try is a reset.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
IF that doesn't stop the rebooting, you should restore the iOS Software. Read this carefully and read to all the way through before proceeding.
Use iTunes to restore your iOS device to factory settings
At the very end of the article under "additional information" there is a link to recovery mode. You might need to use that if you cannot restore in the conventional manner.

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my mphone to backup on icloud is grey out, anyone knows how to resolve the problem? What's the point of purchasing the biggest storage?

i have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my iphone to backup on icloud is grey out, anyone knows how to resolve the problem? What's the point of purchasing the biggest storage?

First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

How to resolve the ip address of all computer conntected to host.

How to resolve the ip address of all computer conntected to host.

Define it in terms which you can program, I mean ...
My point is that none of these terms is well-defined: 'connected' for a start. The network is a packet-switch, not a circuit switch, so strictly speaking there are no connections at all.
What's the purpose behind this?

How to resolve the error -1073807339 when using Agilent LAN/GPIB Gateway (E5810A)?

Dear Sir/Madam,
Appreciate that you could advise me on the following error occur when connect power meter E4419B to computer via E5810A LAN/GPIB Gateway(remote interface) & run with Labview:
-1073807339
VISA Write in E4419_read_power.vi
I have added 5s timeout to Labview program but the result as previous.
There no error occurs when the power meter to computer via USB/GPIB interface(82357B).
Is it related to E5810A driver or the program I wrote?
How to resolve it?
Attachments:
E4419_read_power.vi ‏16 KB

Hi.
I'm experiencing the same problem when connecting a laser controller (New Focus Vortex TLB-6000) via the Agilent E5810A to a PC.
There are no problems when connected through a regular serial port, but timeouts arise every few seconds through the E5810A. I have another controller (SRS LDC501) which works very well with a second Agilent console.
Have you managed to find a solution to this problem?
Thanks,
Orel.

How to resolve the "Incompatible Print Cartridge" Message

Hello everyone
Have you ever received the "Incompatible Print Cartridge" message? This can be caused by defective cartridges, dirty cartridge contacts, or using the wrong cartridges for your printer or region. If you get this message after moving to a different country and using a different HP ink you will need to call HP support and have them explain how to change the region of your printer.
If, however, you have not moved and you are getting this message with a new or current cartridge there is quite a bit of troubleshooting that can be done. There is both an article and youtube video to help you through resolving this issue They are both excellent tools to help with troubleshooting. If the steps don't resolve your issue make sure to try a different cartridges as this helps isolate the issue to the printer or the cartridge.
The 'Incompatible Cartridge', 'Incorrect Print Cartridge', or 'Print Cartridge Problem' Message Disp...
Fix an "Incompatible Print Cartridge" Message - HP Officejet J4680 All-in-One Printer
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.
This question was solved.
View Solution.

If anyone has any questions let me know and I will be happy to help. The above video and article is for the Officejet J4680 but there are other version of the article for other printers that may have more cartridges than just two.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

How to resolve the error ORA-12560 TNSprotocol adapter

I am using Oracle 9i release 2 database on my window xp machine. My database created using DBCA during installation is working fine . Now i want to create the database manually, When i set SET ORACLE_SID=newdb and try to connect to like this
c:\sqlplus /nolog
enter username:sys/sys as sysdba
gives an error ORA-12560 TNSprotocol adapter
how to resolve this error

see this:
ERROR:ORA-12560: TNS:protocol adapter error
see post of user601010

How to resolve the error " low paging memory"

HI all ,
I developed a report, which is running fine in development and in quality , but when it runs on production , it shows the dump 'low paging memory'. how to resolve this , can any one sujjest please ?

Hi,
1) Run a trace ST05 in ur quality system and fine tune the memory consuming select queries.
2) Discuss with the basis regarding this error, probably they can help you out by increasing some space in pRODN.
Regards
Subbu

HT4236 Syncing photos using iTunes in windows revealed this error message "iPad Jayvee cannot be synced because it cannot be read from or written to ." Please advise asap how to resolve the issue. Thanks!

Please advise how to resolve error message - cannot be synced because it cannot be read from or written to.

Hello Janet,
I would recommend this article named 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod found here http://support.apple.com/kb/ht1207
Outdated operating system software
Make sure you have the latest updates for your operating system, which may include improvements for device connections. For example, many USB and FireWire improvements have been included in Windows Service Packs.Check for Mac OS X downloads. Check for Windows updates.
Computer needs updates
Make sure you have the latest updates available for your specific computer model (or components for home-built PCs). These are usually available for download on the support website for the maker of the PC (or component). Many USB updates are listed as "Intel chipset" or just "chipset" updates on PC manufacturer's support and download websites.
Software interference
Some software can interfere with iTunes, making it unable to write files to your iPod. Think about what software you have installed, and try disabling any add-ons that might be interfering with iTunes. Check your suspected software's documentation or contact the software maker if you need assistance with disabling the application. Out-of-date or incorrectly configured security software frequently causes this issue. See these steps for identifying and troubleshooting third-party security software.
Damaged files
If one of your music files or photos is damaged, iTunes may display one of these errors when transferring that file to the iPod. If you identify a file that is causing the error, try deleting that file and reimporting it from a backup file or from the original source. You may be able to repair files by repairing the disk (see the solutions in the next section).
Unregistered .dll files (Windows)
Malware or other software may cause an issue with the digital signing of Windows XP drivers. First try restoringthe iPod using the latest version of iTunes.. If you are unable to restore it or the symptom reappears, follow the steps in this document.
Damaged disk structure
These errors can also appear if the format of your computer's hard drive or your iPod disk is damaged.
To repair your computer's hard disk—Mac OS X users, read this article for instructions. Windows users, search the Help system in Windows for chkdsk to get more information on checking and repairing the disk structure.
To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
Corrupt iPod photo Cache
If you're getting the error when transferring photos to an iPod photo, try deleting the iPod photo Cache and then starting the photo sync again.
Lost connection
Make sure that the connections from your computer to the iPod are snug and do not wiggle or come loose during transfers. For example, if you use the wrong size dock for your iPod, it can put strain on the connectors and cause a bad connection. See these articles for more information:
Learn about iPod Universal Dock
iPod Dock: Specifications
Conflict with third-party hardware
Third-party USB or FireWire devices may also interfere with iTunes' ability to communicate with your iPod. Remove all USB and FireWire devices except the keyboard and mouse before reconnecting your iPod to the computer.
Bad hardware
Hardware failure or non-compliant hardware can cause these errors. This could be an issue with iPod hardware or with the cable or dock you're using, but more often it's an issue with the USB or FireWire card or interface in your computer. Some USB and FireWire interfaces just don't work very well. If you isolate the issue to the USB or FireWire interface in your computer, you may want to try a different port, get the computer serviced, or replace the card or interface with a better one.
If you isolate the issue to an Apple-supplied cable or dock, or the iPod itself, you can get it serviced here.
Take care,
Sterling

How to resolve the "Builld error mxmlc task failed" in flex4 web application

hi all,
I am using flex 4 mxml web application wiht as3. when i deploying this project i am facing the folling error.
Environment:
Flex 3.5 SDK
Flash builder 4 .                 APPLICATION NAME: BillProcess
Ant compile tasks
============
    <property name="FLEX_HOME" value="C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\3.5.0/>
    <property name="JAVA_HOME" value="C:\Program Files\Java\jdk1.6.0_06"/>
    <property name="JRE_HOME" value="C:\Program Files\Java\jre1.6.0_06"/>
ERROR:
init:
[ippprojectproperties] qbServer = workplace.intuit.com
   [delete] Deleting directory C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess\Dev
    [mkdir] Created dir: C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess\Dev
checkForCustomBuild:
custombuild:
dependentProjects:
compile:
[ippflexbuild] Parsing: C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess/.actionScriptProperties
BUILD FAILED
C:\Documents and Settings\TIVL\Adobe Flash Builder 4\BillProcess\ippbuild.xml:101: mxmlc task failed
Total time: 16 seconds.
HOW TO RESOLVE THIS.
please share your useful suggession,
cheers,
B.venkatesan.

hello,
Check out this link http://www.kirupa.com/forum/showthread.php?309387-ant-mxmlc-task-don-t-compile-with-FlexSD K-4 this may solve your problem.
                     Gajanan Hiroji | [email protected] | www.isacglobal.com

How to Resolve the Broken Dc's on CBS.

Similar Messages

Maybe you are looking for