How to resolve the hostname by ipaddress of the service like ftp, smtp..?

Hi,
Can someone help me in identifying the hostname of the machine thru ftp or smpt address, assuming I have this application running in a LAN where these services are existing.
I tried using gethostbyname by passing each of the computername in the LAN . What I get is hostent struct, but when I tried to match the ftp address with the address returned by hostent I doesnt match.
I have not yet tried using gethostbyaddr, I think this may not work because the address that it expects there is the IPaddress of the machine but not the service IP address such as ftp address.
Thanks for your time.
Ram

Hello Greg,
Thank you for this question. What you are reporting looks to me like requires deeper analysis in the system. The channel for such questions is the Service Marketplace <i>http://service.sap.com/.</i> Please post it there.
Thank you!
Kind regards, Kyoko

Similar Messages

  • TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Maybe here:
    IOS 6 App store crash: Apple Support Communities

  • I have started to get this error message: 5.1.3 bad address syntax in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?

    I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?  My email account is through Optimum online and I am using Airpost Express.
    P.S. The error sound "bong" is driving us nuts!

    Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.

  • How to resolve the problem in jdeveloper903 oc4j starting:JspTagLib listener error

    I just download a jdeveloper903,i hava a problem:
    when i start the oc4j alone,it prompt "JspTagLib listener error:null". Then,After depoly the jsp application with JspTag to oc4j,I found the jsp page can not run,but,the jsp application can run in the
    develope environment.
    how can resolve the problem,help!!Thanks.

    I think you might have better luck asking your question in the JDeveloper forum at:
    http://forums.oracle.com/forums/forum.jsp?id=315684
    later -- Jeff

  • How to Resolve the Broken Dc's on CBS.

    Hello all,
    I am facing few broken Dc's in CBS. I tried to resolve the broken DC's by the following procedures, but was not able to completely resolve the broken DC's on CBS. few procedures are
    1. No built and Deploy errors in NWDI
    2.Had released all the activities from transport, no more activity's are in pending state in TSK.
    But I am facing broken DC's in compile state, Metadata and Used Dc's. Can any of you suggest me how to resolve the broken DC's on CBS.
    Thanks you all,
    Anil

    Hi Anil,
    first of all please notice that I've moved this thread to the NWDI forum.
    See the guide:
    Understanding Broken DCs and Dirty DCs
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
    You find some other useful documents in the top-most thread of this page in NWDI forum (SAP NetWeaver Development Infrastructure (NWDI))
    Direct link to the thread:
    Most important NWDI related guides and documents
    The specified item was not found.
    Best Regards,
    Ervin

  • How to resolve the loop in universe level

    how to resolve the loop in universe level

    Hi, Kashim
              In univese level loops resolved by Chasm Trap and Fan Trap methods.
    Chasm Trap:  A chasm trap is a type of join path between three tables when two many-to-one joins converge on single table, and there is no context in place that separate the converging join paths.
    There is "many-to-one-to-many"relationship beween the three tables in the universe structure.you can define a context for each table at the many end of the joins.
    A chasm trap is not dependent on the object types, the query could be made up of only dimensions,only details,or only measures,or any combination of the three types with the "many " tables for chasm to occure.
    you can also detect the chasm trap Automatically, tool---->Detect context
    To resolve the chasm trap, you need to make two separate Queries and than combine the results Depending on type of objects defined for the fact tables and the type of end user environment,
    Fan trap: it is occured when there is a "one-to-many" join to the table that "fans out " into another "one-to-many" join to another table.
    Avoid fan trap: The first place by relating all measure objects in the universe to the same table in the universe structure,Avoid placing a measure on anything other than the last table in a in a table path, which is the table with the "many" cardinality attached to it.
    This methods is not recomended as it only works for measure objects and may result in inefficienies in processing the query. This resolution works the same for chasm and fan traps.
    you can create more alias tables based on your requirement in single universe. and it is true conext, when two or more paths.
    Theese methods also apply for resolving loops:
    Short cut join also one method for resolving loops
    Aggregate aware function used another waty for resolving loops
    if you are not resolving the loop result is  redusing the number of records.

  • My ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

    my ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

    The first thing that I would try is a reset.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    IF that doesn't stop the rebooting, you should restore the iOS Software. Read this carefully and read to all the way through before proceeding.
    Use iTunes to restore your iOS device to factory settings
    At the very end of the article under "additional information" there is a link to recovery mode. You might need to use that if you cannot restore in the conventional manner.

  • After the IOS 7.1 update I have issue with Game Center, I'm not been able to  load the  games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

    After the IOS 7.1 update I have issue with Game Center, I'm not been able to  load the  games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my mphone to backup on icloud is grey out, anyone knows how to resolve the problem?  What's the point of purchasing the biggest storage?

    i have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my iphone to backup on icloud is grey out, anyone knows how to resolve the problem?  What's the point of purchasing the biggest storage?

    First check that your device is correctly connected to the wifi/internet (settings > wifi)
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • How to resolve the ip address of all computer conntected to host.

    How to resolve the ip address of all computer conntected to host.

    Define it in terms which you can program, I mean ...
    My point is that none of these terms is well-defined: 'connected' for a start. The network is a packet-switch, not a circuit switch, so strictly speaking there are no connections at all.
    What's the purpose behind this?

  • ORA-12154 TNS Could not resolve the service name

    I am working on Oracle 9i(Release 2) windows version. I want to change the value of
    shared pool size, buffer size and others database parameter through "Enterprise Manager Console" but
    when i connect to sysdba mode message comes "ORA-12154 TNS Could not resolve the service name".
    How can I solve this problem?

    these problem are you getting from OEM?
    post
    lsnrctl status
    lsnrctl services
    make sure database is running.. all the services running in services.msc
    check error code and start..
    ORA-12514:
         TNS:listener does not currently know of service requested in connect descriptor
    Cause:      The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
    Action:      
    - Wait a moment and try to connect a second time.
    - Check which services are currently known by the listener by executing: lsnrctl services <listener name>
    - Check that the SERVICE_NAME parameter in the connect descriptor of the net service name used specifies a service known by the listener.
    - If an easy connect naming connect identifier was used, check that the service name specified is a service known by the listener.
    - Check for an event in the listener.log file.

  • IMP: How to delete the service order

    Hey Experts,
    Can you tell me how to delete the service order which was created in IW31..? or we have any Functions Module to delete the service order?
    and one more question is I have more than 100 service order in the table ,but it will display only 50 order when i execute this Functions Module BAPI_ALM_ORDERHEAD_GET_LIST
    can you tell me how to solve this problem...?
    Thanking you in advance,
    Regards
    J Sarathi

    This is what the BAPI_ALM_ORDERHEAD_GET_LIST documentation says
    "You can use this method to determine a list of orders according to a list of selection criteria. The number of hits that are produced for the person calling up the list, can be specifically reduced; without further parameter transfers, the first 50 hits are displayed. A complete list of the hits is stored internally. If you call up the selection again within a Logical Unit of Work (LUW) without changing the selection parameters, but with other refurbishment parameters, then you receive further partial quantities of the selection result, as specified by you."
    and for deletion
    check whether you can set any deletion status through the fm BAPI_ALM_ORDER_MAINTAIN
    Also check the business objects BUS2007, BUS2088

  • In XI ,file on application sever  how to do the scenario like file to idoc?

    hi experts,
    In XI ,file on application sever  how to do the scenario like file to idoc?
    thanks in advance
    gupt

    Hi gupta  ,
    The following are excellent websites giving step-by-step solution to solve u'r problem:
    How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    IDoc Packaging and Mapping Techniques
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
    check this blog
    Idoc File -> SAP R/3 packaging
    How ToConfigure IDoc Adapters
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    Troubleshooting File-to-IDOC Scenario in XI.
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    cheers!
    gyanaraj
    ****Pls reward points if u find this helpful

  • How to stop the services provided by net80 and oracle9i

    how to stop the services provided by net80 and oracle9i during the installation of forms6i & reports6i in windows 2003 server

    Go into the control panel and choose services ... stop the services.

  • How to configure the services(WDA) in ESS with EHP7

    Hi Experts,
    I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with  EHP7.currently we are using
    ECC6.0  EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
    How to configure the service in launch pad with WDA.please guide me the step by step procedure.
    Please share the config guide if anyone have.

    hi sap scn ,
    Tips & Recommendations for customizing ESS Menu (WD ABAP) -   ess launchpad
    Summary of configuration options in ESS Personal Information scenario  -personal information
    go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
    if any other revert back again 

Maybe you are looking for