How to resolve VAT triangulation determination in CRM 70

Please adjust SAP CRM so that it supports external tax software packages like Vertex.  There are at least two scenarios to be considered for VAT. 
The first is a direct sale from seller to customer where there are no triangulation issues:
Bentley Systems  sells software licenses (perpetual licenses) and software maintenance contracts.  All of these products and services are electronically delivered out of our European location to our EU customers on one to one basis using SAP CRM as our billing engine.  Because these intangible goods are sold directly from the Bentley entity to the end user, there are no scenarios where EU triangulation comes into play.  No inventory is shipped from the Bentley.  You just need to pass the BP information for the sold to BP.
The second scenario for Bentley is the delivery of services by employees or third party contractors where there may be cross border issues and would need to support triangulation:
Bentley Systems  sells customer training and consulting services.  These may be delivered either electronically or on-site at a physical location.  It is possible that a consultant from our Bentley Finland entity would deliver training to the Belgian office of a French customer.  This means that the SAP CRM billing engine needs to be able pass sufficient BP information to the external tax engine like Vertex so that the VAT triangulation tax rules can be properly calculated.
Since billing out of SAP CRM is an SAP standard supported methodology, it should be updated to support external tax software providers such as Vertex, Taxware, and Sabrix.

Yes it is well possible to resolve the collisions in MAS. that's what called as Concurrent Development. Two users modify the same object,Collsion will result. In such cases, you need to choose which version to be released.
Instead of writing everything here, I will provide one quick link which explains about how to resolve collisions.
http://help.sap.com/saphelp_crm50/helpdata/en/25/96033cc68e3f05e10000000a114084/content.htm
In your case, If you require the changes done by both the suersm then you need to go for Merge option. Please check the above link for more info.
Best Regards
Shankar

Similar Messages

  • I am no longer able to double click on a file and have it open.  Any suggestions on how to resolve this problem?

    I am no longer able to double click on a file and have it open.  Any suggestions on how to resolve this problem?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Getting Error "Pricing Procedure could not be determined" in CRM Functional

    Hi Experts,
        While creating Quotation for Products, am getting error message of  " Pricing Procedure could not be determined".
    Kindly reply, how 2 resolve this by steps-by-steps.
    Thanks..
    Edited by: poorav4293 on Aug 6, 2011 12:27 PM

    Hi,
    Go to SPRO-> IMG-> Basic Functions-> pricing. Here goto second node & select determine pricing procedure.
    Here check the combination....
    sales org-distribution channel-doc price-cust price-pricing procedure.
    Here see the corresponding pricing procedure which should be proper based on the condition types.
    Thanks!
    Aswith.

  • How to Resolve HTTP 500 error in sharepoint 2013 workflow

    Hi guys,
                 I am new to Sharepoint. I have created a workflow for sending if a document added or edited in a document library. When i added a document i
    workflow status shows workflow started. But when checked in the internal status of the workflow it shows as cancelled.
    RequestorId: 2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce. Details: System.ApplicationException: HTTP 500 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["132"],"SPRequestGuid":["2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce"],"request-id":["2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 05 Feb 2014 09:18:43 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
    at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.Activit
    How to resolve this error. It shows http 500 error.

    Go to one of your SharePoint boxes, open op powershell and get teh logs around the "SPRequestGUid" you see in your message...  Do something like this:
    Merge-SPLogFile -path "Desktop\wferror.log" -correlation 2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce
    This will basically grab log files from all boxes ULS logs that have to do with that transaction.
    *** not sure how far back it will look depending on your log size, but sometimes I've had to reproduce another error (with a new SPGuid) and then Merge logs with that Correlation...
    Once you get this file, you can open it with ULSViewer and then you can filter/sort by Product/Category/ErrorLevel/etc...  this will definitely help you determine what the issue is.  The key is that SPRequestGuid (which is the "Correlation ID"
    that you see when you get SharePoint Unexpected errors to reference the log files...

  • How to resolve Collision in MAS 4.0

    Hi All
    I need help on this. We are 2 developers both of us unknowigly made some changes to the same tile in 2 diffrent changlists.
    we are ready to release with lot of additional changes in the change list. It gives an collision error. We don't want to delete the change list. Is there any way we can resolve this collision.
    or at least save one of the changelist?
    Its Mobile Application Studio with CRM 4.0
    Thanks in advance
    Hetal

    Yes it is well possible to resolve the collisions in MAS. that's what called as Concurrent Development. Two users modify the same object,Collsion will result. In such cases, you need to choose which version to be released.
    Instead of writing everything here, I will provide one quick link which explains about how to resolve collisions.
    http://help.sap.com/saphelp_crm50/helpdata/en/25/96033cc68e3f05e10000000a114084/content.htm
    In your case, If you require the changes done by both the suersm then you need to go for Merge option. Please check the above link for more info.
    Best Regards
    Shankar

  • Resolving error for determination for agents and buffering

    Hi,
    Can u please let me know how to resolve buffering error and agent determination error, by which way and what tcode are there for it if any ?
    One more question is there how to test workflow and how to restart it with issues?
    Thanks
    Parag

    Hi parag ,
    how to resolve buffering error -
    To resolve buffering errors 
    1) Use Synchronize Runtime Buffer  ( SWU_OBUF)
    Always refresh the runtime buffer when you have made a change in a task definition or after transporting
    new workflows  or versions of workflows that are to be used on the day of tranport .
    2) use the refresh organizational environment option in Business workplace ( SBWP)  or in start workflow  function ( SWUS) .This refreshes buffers for current user id .
    agent determination error
    to solve agent determination errors ,you can take help from following tcodes -
    swi1_rule  - Execute rules for work items
    swi2_adm1  -  Execute work items without agents
    swia - Execute work items without agent check
    how to test workflow and how to restart it with issues
    SWPR - workflow restart after error
    swi2_diag -Diagnosis of workflow with errors
    SWPC  -  continue workflow after system crash
    SWUD - workflow diagnosis
    swus - test workflow
    hope this helps.
    Thanks,
    sahiba

  • How to enable net value in sap crm opportunity

    hello all ,
    how to enable net value in sap crm opportunity and item category.
    please help me out i am new in sap crm
    Ahmad

    Hi Ali,
    Every transaction which you create have some predefined rule in the form of procedure which is attached in the transaction level. You can follow below path and check for the transaction which are the rule maintained.
    CRM->Basic setting-> Define transaction types.
    Search for your transaction type and double link in order to see all the rules attached to transaction level.
    You also need to define which item categories you wanted to configure for particular transaction type which you all ready have done it seems.
    You also need to define pricing procedure to the transaction where you need to checked for errors.
    Below is the path
    CRM->Basic setting-> Define transaction type-> open your transaction
    step 2:click on assignment of business transaction categories than select category as Sales
    than click on  Customizing Header option to see attached pricing procedure with it.here you need to check for your error.
    to check partner determination rule please follow below path in SPRO. -> partner determination procedure
    Check in head of transaction which partner procedure is attached.
    Than search for partner determination procedure in below path.
    I hope this will help you to validate the setting for your transaction and will be helpful to solve your issue.
    Thanks,
    Prem

  • HT204053 How to resolve "error while trying to connect to the server."

    Receive "error while trying to connect to the server" on my PC when using iCloud. How to resolve?

    check the below link.
    /people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

  • How to resolve Nota Fiscal Internal Verification error?

    Can someone please help me determine how to resolve an error with a Nota Fiscal Electronica?  An NF-e doc was manually created using (J1B1N) but it will not go through to the government.  There's an error that the CFOP description is missing in the header (however, the description for the CFOP has been maintained).  The status of the NF-e doc is '8' (Internal Validation error in messaging system.  Send again!).  What other data (vendor master, customer master, J1B1TAX config) can I check to resolve this error?

    Hello,
    Did you check with the metalink ora-600 troubleshooter?
    May be the below description helpful to you:
    Note: For additional ORA-600 related information please read Note 146580.1
    PURPOSE:
    This article represents a partially published OERI note.
    It has been published because the ORA-600 error has been
    reported in at least one confirmed bug.
    Therefore, the SUGGESTIONS section of this article may help
    in terms of identifying the cause of the error.
    This specific ORA-600 error may be considered for full publication
    at a later date. If/when fully published, additional information
    will be available here on the nature of this error.
    SUGGESTIONS:
    Execute the following command on all tables in question.
    SQL> ANALYZE TABLE <tablename> VALIDATE STRUCTURE CASCADE;
    Reference Note 28814.1 Handling Oracle Block Corruptions in Oracle7/8/8i
    If the Known Issues section below does not help in terms of identifying
    a solution, please submit the trace files and alert.log to Oracle
    Support Services for further analysis.
    Known Issues:
    Bug# 6709070 See Note 6709070.8
    OERI [6780] for DML against a compressed data block
    Fixed: 10.2.0.5, 11.2
    ****************************************

  • I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as how to resolve this issue

    I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as to how to resolve this issue

    I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
    You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
    http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
    I Googled "workaround for FaceTime in UAE" to find this.

  • How to resolve #Multivalue Error

    HI All,
    I have a data like below, in this for inpatient data is NULL and as per business requirement  if data is null then "0". so i create a variable and drag into inpatient's total column
    statement for inpatient is
    =If IsNull([total]) Then 0 Else [total] Where ([items]="Inpatient")
    items                                    total
    Office
    4    
    Utilization
    70
    Inpatient
    it is working and showing as "0"
    but when inpatient has value it is showing #multivalue"
    Office Visits
    4
    Non-Emergency ED Utilization
    70
    Inpatient Stays
    40
    how to resolve is issue
    Please reply i am using SAP BO 3.1 INFOVIEW
    Thanks in advance
    Ranjeet

    Hi Ranjeet,
    First thing is you are getting this error because of the where clause used in the variable.
    Because in the 2nd case when it has value for Inpatient, it is actually taking the same value for all the 3 cases.
    How to remove null value with 0:
    1. Remove where clause from the variable and use that variable in place of Total in the table report.
    2. Use format number option to place 0 in place of undefined values.
    Hope it helps. Please ask if you have any queries.
    Regards,
    Subrat

  • TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Maybe here:
    IOS 6 App store crash: Apple Support Communities

  • When i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

    when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

  • How to resolve many-to-many join by 2 one-to-many joins

    Hi,
       I was asked many times how to resolve many to many relationship between two tables. I read to use 2 one -to- many relationships to resolve this. Can some expalin me when many to many relationship occurs between two tables and how to reslove them with practicle examples. Is there any article on this?
    Regards,
    Nanda Kishore

    Hi,
    Please check below link.
    http://www.forumtopics.com/busobj/viewtopic.php?p=859029&sid=20d79e3df07b0d8b41aadfbd902bb6b2
    http://blog.oaktonsoftware.com/2011/04/bridge-tables-and-many-to-many.html
    Thanks,
    Amit

Maybe you are looking for