How to resolve white screen of death

My macbrook pro has been working just fine and then today when I opened it it had the white screen of death. Not sure how to resolve this issue.

cruediger,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the white screen now?

Similar Messages

  • How to fix white screen of death on iPod 4g after screen replacement?

    How to fix white screen of death on iPod 4g after screen replacement?

    I would try to reset it before anything else.  To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
    If this does not work then more than likely the LCD is damaged.
    btw- The white screen is common after repairs.  The reset fix works 90% of the time.
    iRefresh ltd.
    http://www.ipodrefresh.com

  • How to fix white screen f death

    can u please send me an email 2
    [email protected]

    I would try to reset it before anything else.  To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
    If this does not work then more than likely the LCD is damaged.
    btw- The white screen is common after repairs.  The reset fix works 90% of the time.
    iRefresh ltd.
    http://www.ipodrefresh.com

  • HT1688 how do you repair white screen of death

    how do you repair white screen of death for iphone 3gs

    I have no idea what that is.  Can you elaborate?  Also, can you please let us know the troubleshooting steps you've taken (such as the ones recommended in the user guide) so that we don't waste our time giving you solutions that you've already tried?

  • How do I get rid of the white screen of death? :(

    Hi!
    How do i get rid of the white screen of death?
    (iPod Touch Gen 2), I don't want to get a new iPod and I heard you can fix it without going to an apple store, are there any solutions..? (:
    Please help!! Thank you!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How much time will i take for the battery to drain, with white screen of death?

    Yesterday I updated the software of my iPod touch (4gen), and today while using facebook I got the white screen of death. I tried to holding the sleep and home buttons but I didn't help. Then I tried to connect to iTunes but iTunes does not recognize my iPod. It seems that the only solution is to let the battery drain. My question is how much time will it take for the battery to drain (I charged it yesterday). Am I damaging my iPod in anyway?( I am worried because the back is a little hot). Should Ii try co cool it by placing  it in front of a fan?

    Yes it will show the low battery picture. Then I just connected it to my PC and restored it.
    For the cold pack I used one of these gel-packs http://www.coldchaintech.com/products/gel-packs.php ( I had them at home).
    I don't think using ice is a good idea here is why:
    1. If you use an ice pack you should be careful to prevent water from entering your iPod.
    2. Your iPod should not get colder than 32° F which is the minimum Operating temperature. And ice is colder than 32° F.

  • I have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Hi my ipod got the white screen of death i hear thats what its called i was wondering if anybody new how to fix it? If someone knew it would be great to have a feedback

    Hi my ipod got the white screen of death i hear thats what its called i was wondering if anybody new how to fix it? If someone knew it would be great to have a feedback

    OMG that happened to my ipod as well... when i checked to see if there was anything that i could do alsmost everyone would tell me to hold the home and power button until it turned off then turn it back on... it didnt work with my ipod but worked with my friends... hopefully it works with yours. And if not but another one thats what i did and now the other one cracked i guess its just luck

  • How to deal with the "white screen of death"?

    My 1 hour old iMac (27 inch i5) just died. I had used it for less than 30 mins when it downloaded an OS update and rebooted. Then it refuses to boot, stuck in a white screen.
    After that I slid in the recover disk and used the disk utility to restore the HDD as in the recover manual. It then spent 30 mins recovering,. However, on re-start it is still stuck in the white screen of death.
    What do i do now?

    Hi anerjee;
    With a brand new Mac, personally I would not mess with it. I would take it back to Apple and ask them to fix it.
    Allan

  • White Screen of Death Questions [PLEASE HELP!]

    If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
    Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
    I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
    Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
    NOTE: My iPod is still under warranty.
    Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
    I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
    I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
    Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
    This may be important:
    The iPod charges fine.
    The iPod can be used with my computer and iTunes fine.
    To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
    Here are some questions I have for you guys:
    Will Apple cover this in my warranty?
    If they won't, what should I do?
    How much would a replacement screen cost?
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    What could be the cause and why?
    How can I retrieve that important information? (Contacts & To Do List)
    Have you got any suggestions/tips for me?
    I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
    Daniel

    Will Apple cover this in my warranty?
    As stated above it is not covered by the warranty as it will be deemed accidental damage.  You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost.  They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
    If they won't, what should I do?
    Again, bring it into them anyways and explain what happened.  You have nothing to lose either way.  Otherwise, you really only have 2 other options.  Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look.  There are some excellent step-by-step repair guides at http://www.ifixit.com/.
    How much would a replacement screen cost?
    This depends on where or how you have it repaired.  Here is Apple's repair pricing guide.
    http://www.apple.com/support/ipod/service/prices/
    Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    If you have a warranty on it still, I wouldn't quite yet.  Take it to your local Apple store as explained above.  Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them. 
    What could be the cause and why?
    As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged.  As to what exact component, there is no way to tell.
    How can I retrieve that important information? (Contacts & To Do List)
    Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route).  See here what is included in the backup of the device.
    iTunes: About iOS backups
    If you get a new or replacement device you can restore it from that backup.
    Have you got any suggestions/tips for me?
    As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out.  Remember that they are not obligated to do so since the damage is technically accidental.  Be kind and polite when explaning what happened. You never know what could happen!
    B-rock

  • IPod Nano white screen of death - RESURRECTED! :D

    Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
    It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
    Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
    I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
    Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
    I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
    NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
    The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
    I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
    I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
    Please, is there any hope at all in this iPod?  At all?
    AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
    It has hope, in a way!
    Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
    Cool stuff, I swear on that! My favorite song was on here too!
    How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
    The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
    This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
    I love you Apple.

    Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
    If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
    i

  • White screen of death from game.  And a new game not working at all

    My iPod touch 4th gen has been getting the white screen of death when I try to play plants vs zombies why does this keep happening and is there a way to stop it from happening again?
    And I recently installed fruit ninja and it won`t work at all it opens but it just says loading and then it crashes and I've tried running it in safe mode and it still dies the same thing what can I do to get the game to work?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My ipod touch 4th gen. is stuck on white screen of death.

    I recentally had dropped my ipod touch and when i picked it up it was stuck on the white screen of death. I tried to hard restart by holding down the power and home button at the same time, but the screen would only turn off then come right back on. Then i let the power drain. After it would no longer turn on i put it on the charger to find that the white screen would pop right back up. I didnt want to restore it but because its my only option i put it on my compute but itunes couldnt acess it because i had a passcode on it. is there a differnt way to restore it or fix it?  HELLLPPP MEEEE!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present.  Need help?

    I have a 13 inch MacBook Pro (2009).  Recently I bought an extended hard drive because I had used up the memory on my iDisk.  As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down.  Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display.  Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains.  I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this.  I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro.  So could someone on here please help me?  It would be greatly appreciated & I thank you in advance!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • White screen of death with itunes 7

    I recently had to restore my computer so I lost everything. So when I was trying to reinstall my ipod and itunes my ipod froze...WHITE SCREEN OF DEATH!!! I tryed restarting it, put it into disk mode, and to restore it. But when I try to restore it my itunes likes to freeze up as well...urg...I've done this about 3 times and the same thing every time. but what makes everything even worse is that my itunes wont open now and i also have reinstalled it like 3 times...what do I do now??? Can I go and get the older itunes??? and if so how???
    5th gen iPod   Windows XP  

    Welcome to Apple Discussions!
    Is your iPod showing the White Screen?
    Can you get your iPod into Disk Mode?
    Putting iPod into Disk Mode
    After you get it into Disk Mode, try to restore it (after you get iTunes working).
    See if this helps with iTunes not opening...
    iTunes won't open or unexpectedly quits
    You may also want to post/look through the iTunes forums.
    btabz

Maybe you are looking for

  • T420 Video Lags

    My t420 has an integrated Intel HD Graphics card. Periodically, it will pixelate the screen and white out parts of programs like excel. Most recently, it shows an "up-carrot" or < )pointing up, it little sections of the screen. I tried changing resol

  • Multiple Keyword Sets (For Multiple Databases)

    I work with several different Lightroom databases and it would be nice to be able to have separate sets of keywords that go with each database. In my specific case, I use one database for my personal photographic endeavors and another for an image li

  • MS-DOS.This system doesn't support fullscreen mode in windows server 2008

    MS-DOS.This system doesn't support fullscreen mode.Choose close to terminate the application. Unable to open full size screen mode for MS-DOS in virtual windows server 2008

  • Can I use a 3TB HD in my g5?

    Hey! I was recently on the crucial.com website looking for a price on memory upgrades for my g5 1.8 DP and thye also suggested a new hard drive.  However, they said that my Mac could use a 3TB HD.  I thought I had read long ago that the pre-PCIe G5 M

  • Can't stop import; can't quit Aperture

    I have downloaded the trial version of Aperture 3.0.2 and started to play around with it. I'm in trouble already. Under "New" I created and named a new slideshow, then using Inspector>import>show iPhoto Browser I selected one photo and dragged it to