How to restart a curent approval step rather complete wfl with a event

Hi,
I want to restart the current approval step BUt this should happen dynamically.
so i have created an event Restart in the business object. I need to restart the step whether the approver has rejeced so rather starting the entire workflow again,
Can I use the event - Restart Current step which I have created in the BO or do i need to handle it differently...
Kindly suggest me soon as I need to complette this today
Thanks,
shanky
Edited by: shanky s on Nov 10, 2010 8:02 AM

Hi,
Gautam
Here the scenario is a resignation workflow.
The moment the employee raises a request for resignation, it go es for approvals at various levels.
For supporse it has been approved by 3 approvers, it has to get approved by the 4 the approver, The 4 th approver rejects the employee. Here in normal case the workflow starts from the 1st level and again it goes for approval..sequentialy
But in my case the workflow should start from the place where it got rejected initially....not from the 1st level but shuld start from the rejected level.
So at this place, I want to restart the level where it was rejected earlier not from all the levels.
Thanks,
Shanky

Similar Messages

KMC Migration Tool stopped. How to restart avoiding the finished steps?

Hi,
I'm using KMC Migration Tool for upgrading EP 6.0 SP 2 (6.20) to EP NW04 SPS15 (6.40). We have experienced some network problems, and the process of DB migration has stopped between the end of the migration of task AP - completed suscesfully (the last step of the Migration the DataBase, many hours!!) - and the begining of the synchronization the fsdb Repositories (only a few minutes). When I tried to restart the process of DB migration, the KMC Migration tool tried restarting all the migration tasks from the begining of the DB Migration.
How to restart avoiding the finished steps? How can I avoid to repeat the migration of the DB from the begining, especially if it has executed suscesfully? Can I synchronize the FSDB repositories manually at the end of the EP migration? How can I do it?
If I had to restart the process, is it necessary to restore the target DB, or the process does not insert records from the last execution?
Many thanks for your help,
Best regards,

Hi,
CM repositories in FSDB mode can have a manual backup before configuring the local root. The XML file provides the description of behaviors and persistence levels for the file system. To have a manual backup the auto sync has to be deactivated or else there will be a huge meta data loss.
what i feel is like you have to restore the DB before manual bacup(.if the Auto sync is activated). However, i dont think so that you can resume the migration.
Regards,
Anand

Ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?

ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?

Hi there did you end up getting this resolved? I have the same exact same issue with my Ipad 4 when updating to 8.1.3....frozen on the apple logo. Tried resetting as advised by other users but just goes back to the same logo. Tried connecting to iTunes but device is not picked up at all. Left it over night to run flat hoping charging might kick start something....but when I put on the charger it shows the battery charge icon but won't actually charge it. It's really doin my head in trying to find a fix - cheers Morgan

ChaRM 7.1 SP12: How to remove Activity from Approval Step?

Hello Experts,
I'm wondering if there is an option to remove Activity from Approval Step? I'd like to remove activity 'Not Relevant' from approval step:
Any help please?
Thanks & regards,
MM

Hi
These values are defined in the approval status profile IT000003, You can change there.
But be very cautious, remove the corresponding actions, checks and ppf actions too.
Regards
Rishav

How to restart WorkItem if the status is completed

Hello,
Due to my mistake in PRD not in DEV i changed the WI status from started to completed.
Now i have 110 WI affected and i dont know how to restart them, or make them finish normaly the right path.
In the LOG i can see: Execution was ignored (work item has final status)
Area: SWF_RUN
Msg: 568
Regards
Laurynas Prikockis
Edited by: Laurynas Prikockis on Apr 15, 2009 7:59 AM

Resetting the status of a completed workitem? I think it is not possible , because you can reset the status of a workitem which is in in process state to ready state or the workitem which is in error state( May be not sure) but the status of completed workitem , not possible, because the workitem will not be in any of the users inbox.
But will let you know , if there is any possiblity
Check this error when I tried to reset the status of workitem which is completed by using the FM
SAP_WAPI_SET_WORKITEM_STATUS
Status change from COMPLETED to READY is not allowed/possible

How do you show multiple products horizontally rather than vertically with the module_productfeaturelist?

I am trying to have 3 to 4 featured products that share the same tag next to each other rather than stacked. Is there a way to do this by customizing the "List of Products by Tag" or is there another module I should be using?
What i am currently getting is this and I would like the side by side instead:
{module_productfeaturelist,featured,3,Weight,,true}

Your monitor would need an HDMI connection to hook it to AppleTV. AppleTV would need to be on the same network as the IMac, presumably wireless if you don't want to run cables.
You would then need to use Airplay Mirroring, and that requires reasonably modern Macs, see:
About AirPlay Mirroring in OS X
I don't know for certain but if you set up an automatic powerpoint slideshow you could probably export to an AppleTV compatible movie files, and then play that to AppleTV via iTunes as well, which ought to work with older Macs but video might need to be set to loop or repeat itself a lot.
If you want to use Airplay Mirroring buthave an old Mac, then AirParrot software has a demo, and some people find this ok.

How do you get the two step security to work with virtual machines running under parallels?

I use Quickbooks running on a virtual PC under Parallels. I have always have Quickbooks interface with Thunderbird on the PC side to email invoices to customers using my apple email account.
Once I switched to two-step verification security, Apple doesn't recognize the "new" computer trying to access my mail account, but it also doesn't send any kind of code to a second device to authorize the access.
For now, I've had to switch back to the traditional security and the above process immediately works again 9without asking me any security questions).
Is there a way to have Apple recognize the virtual PC (or any other non-Mac computer) with two-step verification security?

You have to go to your Apple ID and generate application specific passwords.
Apple ID - Manage

How to Migrate LR to Another Computer | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of the Complete Picture, Julieanne Kost explains how to transfer all of your Lightroom Catalogs, backups, presets, preferences and supporting files from one computer to another. If the paths to your images change along the way, she provides her tips on how to re-link any missing files and folders.
http://adobe.ly/wDrTGO

This is much more complicated than it need be - Adobe should make a Migrate command that moves the entire show. Users can then deselect options as to what to copy or simply copy wholesale. Don't you think?

How to restart the i pad after eraseing the contents

Hey does any body know how to restart the Ipad after the contents were erase with out being back up? Now the Ipad won't let get to home screen

If you erase the contents of the iPad, you have to start all over again, just like you did when you took it out of the box and turned it on for the first time. It is like the device is brand new again. You will get to a point in the set up where you have the option of restoring from a backup (iTunes or iCloud) or set it up as a new device. If you don't have a backup, then you do have to start all over again. It doesn't "go to the home screen" until after you set it up again.
If you are not seeing this behavior on your iPad, restart the iPad and try again.
If that doesn't answer your question, what exactly are you trying to do? And what about it isn't working for you?

Assign step after Approve step can't execute automatically

I have a Assign step after Approve step in my workflow. After Approve step is completed. Assign step always shown as Error status in the workflow owner's queue. The workflow owner has to manually Perform this Assign step and send to next step.
Is there way to let Assign step execute automatically after Approve step is completed?

Thanks for the posting. I am using MDM 5.5 SP4, maybe that is the reason. Assignment works fine if I manually perform it during the workflow. But it can't execute automatically as part of the workflow. it needs manual execution. Do you think this will be resolved if I upgrade to SP5? Is SP5 already available now?

How to use the Validate step for Approve step

Hi Experts,
I have modeled a workflow with the steps start,process, validate, approve, process and stop.
Process is set to owner and approve is set to some other user user1.
My requirement is as follows :
1) Approve the records by approver and then it should send it to the next step for further processing
1.1) if the approver did not approve the record it should send a error message until the record is approved. So it should not send it to the next step when record is not approved
I am using a field called item status for approving and disapproving the records. My validation is based on this field only... Validation working fine when i tested it manually.
But my issue is when am using this validate step in workflow design validation is getting triggered for all the users.as per my requirement only approver should get the error message.But in my scenario owner is getting the error message and approver is not getting any message.
How can i use the validate step only for particular step say approve in workflow.
Can anyone please help me out how should use validate step only for approve step...
Thanks & Regards
Sireesha.
Edited by: sireesha esukapalli on Jun 17, 2008 2:48 PM

Hi ,
I have set the validation property to "None".
My design is as follows :
start->process->validate->approve->stop.
Owner is assigned to process step and approver is assigned to approve step.
Now my problem is owner is also getting this error message along with the approver. AS per the design both process, approve users are getting the error message.
As per my requirement only approver should get this prompt but not the owner.
How can i restrict only for specifc user to get this message.
Can anybody please advice how can restrict the owner to not get this error message...
Thanks & Regards
Sireesha.
Edited by: sireesha esukapalli on Jun 24, 2008 2:18 PM

How to restart an workflow if ended in error at SEND Mail step.

Hello All
      I am facing some problem in restarting the error workflow.
Issue is:
   Workflow ended in error at the mail notification step, since the mail id is not filled into the container so there is no address (mail id) and ended in error.
   How to restart these kinds of workflow in the system?, we have tried to change the container value by assigning mail id and restarted the workflow but still went into error.
Is it possible to restart an workflow which ended in error other than rule resolution.
Regards
Anand KS

I think you went in the write approach. I think you have to change the container properly by populating the ADDRESSTRING container element. Also check whether type of email recipient in your container is et to Email.
Thanks
Arghadip

How to restart awaiting approval for RFX

Dear Expert,
We're on SRM 7 and use automatic approval workflow for RFX.
Today, when we created RFx and checked the the approval status , it is awaiting approval and the system can not approve it .
I check the log , and it is no error. so we had to restart SRM system, after that, the workflow is Ok.
Now, I want to know how to restart workflow for the RFx which approval status is awaiting approval .
Best Regards,
Bill

Hi,
What do you say about restart SRM? Close the Browser and does you open again?
Define as solemnity approval RFX through transaction OOCU in the way SRM> SRM-EBP> SRM-EBP-WFL
Activate event linking
Rgs,
Pedro Marques

My ipod touch was water damaged, i hear that we have to restart,rest,restore, but i want to know ,step by step , how to restart,reset and restore

my ipod touch was water damaged, i hear that we have to restart,rest,restore, but i want to know ,step by step , how to restart,reset and restore

iPod touch User Guide (For iOS 5.0 Software)

How to skip approving steps for users who are also approvers?

We have a business need to be able to skip the approving steps for the users who are also approvers.
For this following steps were followed :-
1) Open .task file and go into the Assignment tab. Double click on the performer box within the routing slip, this should open the "Edit Participant Type" editor. Expand the "Advanced" section and place a check next to "specify skip rule", then click the edit icon to the right. Now enter an XPath expression that will test whether the current user is equal to the task creator.
2) We used - isUserInRole XPath function in the "Identify Service Functions" dropdown - first param to function is the userID, the 2nd is the role name.
We tried with hardcoded userID as well as by using
ids:isUserInRole(/task:task/task:systemAttributes/task:updatedBy/task:id,'California')
where 'California' is the group name (as one of the forum threads told this function works with groups).
We also tried with swimlane roles(using bpm.getPerformer() function) but it does not work either.
Please let me know if any one has any solution to this problem.

session as DirectorySession = DirectorySession.currentEngineSession
dirHum as Fuego.Fdi.DirHumanParticipant = DirHumanParticipant.fetch(session : session, id : "myUserId")
result = hasRoleAssigned(dirHum, role : "Approver")Give that a try...
HTH,
-Kevin

How to restart a curent approval step rather complete wfl with a event

Similar Messages

Maybe you are looking for