How to restart a program that has already started?
On my previous cable TV system, I could restart a program after it had already started all the way back to the beginning, to see the whole program. How can I do this with FIOS?
Thanks.
tns wrote:
I had only heard that Cablevision was doing this with its Virtual DVR.
Essentially with Verizon FIOS you can only restart on a DVR what the DVR has in its buffer. If it one of the tuners happened to be tuned to that station (even if the DVR was off), you can backup to the beginning of the program if its still in the buffer. One way to see if this is possible, without rewinding, is to hit record, then look in your DVR recordings and select the program.
Some days later you might find a program in the VOD section. For some channels, e.g. movie channels, it may be already in VOD.
No. I don't mean with the DVR. Let's say I turn on a program at 9:17PM but it started at 9 PM. Is there a way I can re-start the program so I can watch it from the beginning? My cable company had a way to do this. Does FIOS?
Similar Messages
-
I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.
-
How to unrelease a task that has already been relesed?
Hi -
I would like to unrelease a task that has already been relesed. By unreleasing, I would like to remove some unnecessary objects from the transport.
Any ideas?
Regards,
-SonnyI have requested basis to merge the request.
The old transport had released tasks with some unwanted objects. By copying to new transport, I was hoping to remove unwanted objects and then release the tasks of new transport.
However, the tasks of copied transports are already released and it does not allow to remove anything.
Could the copied tasks be in unreleased state?
-Sonny -
How to edit a video that has already been exported?
I have a video which was exported, however I would like to go back and edit some things. When I open FCPX, I am unable to find the video file at all, and the only way I can even see it in the program is by importing the already exported file. Obviously I cannot edit the video. If there are any suggestions on what can be done to retrieve the file, it would be very much appreciated! Thank you!
Hi Mikaelaken,
FCPX is generally good at keeping track of your projects, events and media.
What version of FCPX are you running?
If you dont see the project at all in your projects/events list, it may be that you moved some files about outside of FCPX in Finder? I suspect it isnt lost, just misplaced
Perhaps a brief description of your recent workflow/activity with respect to this project may help us to help you
Cheers,
Bammers -
How to stop downloading a podcast that has already started?
Hi, can someone please help me with this. I accidently started downloading a podcast i didn't want. How do i stop it?
There is a button to the right of the name that looks like a stop square with a blue ring forming around it. Click that and it will stop downloading. If you swipe it and select delete it will kill the data (be warned tho, it will also kill that podcast selection and I don't know how to get it back!)
-
How to debug a load that has already happened
Hello Experts,
I have a load from an InfoCube to a DSO. It's a 7.0 dataflow, no start routine, and only straight mapping between object to object. From the InfoCube I have a key figure 0RPA_RLQ being mapped to 0RPA_RLQ which the key figures are loading and appearing correctly in LISTCUBE for the target DSO. However, the unit of measure InfoObject 0SALES_UNIT is also straight mapped to 0SALES_UNIT in the target DSO but the "EA" is not being loaded 100% of the time. These incorrect loads seem to happen randomly.
The load from InfoCube to DSO are Delta Loads. The request in the source InfoCube is being rolled up in a previous step in the process chain. Then after it's rolled up, then it's loaded into the DSO. The loads are always successful.
HOWEVER - when I selectively load one of the records that loaded a blank value for 0SALES_UNIT, then the EA loads successfully. So I can't do a debug using a new load. I need to find out why the OLD delta loads weren't loading correctly.
Any ideas? Thanks!Hi,
Check the key combination of your DSO. It seems that your cube must be having multiple records for DSO's key and that is why Unit is being overwritten.
In DTP, there is a option to simulate data transfer and you can select the data values as well for data load. I think delta from cube happens on request basis, so try debugging your load by giving the selection on Request ID presend in the cube.
Regards,
Gaurav -
How to restart an iphone that has completely died and can not be recharged
Today for some reason my iphn4S completely died and I can not turn it on or even recharge it. It was not flat so I dont know why it died. I can not even start it through iTunes. Any comment on ways to start it or is it stuffed? It is only 6 months old.
You are both right - I had to plug it in and then by holding both switches for longer than normal - it finally started. I have now rushed to back it up with all my valuable info and am still following up with the tech support as it was really warm and did not have any aplications running, so I doubt that it is going to be reliable from now on - and I can not trust it ....
thanks for your help -
I need help with my phone / at work and was going to do update. now my phone is stuck on wanting to plug into itunes and i cant from work and need to stop need step by step im not very good with computers
You won't be able to use your phone until you restore it via iTunes.
http://support.apple.com/kb/ht1414 -
Can you stop an app update that has already started downloading
I started an "update all" when I noticed it was recommended that you not download one of the updates. How can I stop this update now that it has started downloading (I have paused it)?
James Ward4 wrote:
I assume the app in question is the Kindle app (or perhaps should be renamed to "just how stupid is Amazon"
No, we should be asking how brilliant Amazon is. Break the app, and convince loyal Amazon Kindle users to switch to their pathetic devices.
I'm actually quite mad about this. I do research, and I have a lot of "academic" science books on my Kindle app. All of my notes are lost (and I thought they were synced to Amazon's cloud).
I don't blame Apple, because the app works like it always did, except removing all of my books. But how stupid are the Amazon iOS programmers to have missed this. -
How to create a new partion (to save my files & Folders) in my HP (Compaq LE1902x )PC that has already 4 primary partitions ? when something goes wrong along with OS(C) drive my all files are lost. so i want to create a new partition & dedicate it to my files & folders.
I would consider another problem. What if the hard drive (not the OS) fails. You'd lose all your data, all partitions. It seems better logic would be to copy your files and folders to either an external hard drive or USB thumb drive.
I would not use the internal backup program, but would manually copy the data. I also would not leave such device attached to the computer.
In my system I have a separate USB thumb drive that stored critical medical and legal documents. That way, I can travel with it, as needed. I also clone my primary desktop every 30-45 days. That way, if I get a failure, it's only that far back on lesser files.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
How do I get a refund on Export PDF that has ALREADY been agreed
On 1/21-1/22 I tried to 'renew' a subscription for Export PDF. By some error (maybe mine - I just dont understand the whole thing) my Bank was immediately charged for two subscriptions, each at a different price. I immediately "chat"ted with several reps (it was difficult to get onto the chat and find out how to cancel) and was assured that both would be cancelled and refunded. They weren't!
I waited a week. Was again frustrated by the chat hookup, and tried the 'cloud' retail product tel #, assuming it was wrong but that I could be switched to the correct one. Had a very pleasant chat, was assured that both would be cancelled and refunded, received 2 e-mails confirming the cancellations, each with a seperate "Case #". Felt pretty good! It had only taken me a week of reasonably diligent effort to get a very simple thing done! IT WASN"T DONE! (Yes, I apologize - I know I'm loud - but by now I've got steam coming out of my ears!)
Today I got an e-mail, telling me that the refund had been processed and the case # would be closed. I looked at my bank, and only one had been refunded! I reviewed all the other e-mails and the notes from the telephone calls and chats to be sure I hadn't misunderstood something. But, no I hadn't. I went to my Adobe on-line and looked up 'my orders' history. Sure enough one had been invoiced and refunded ( the lesser charge of the two) but the other had ONLY BEEN INVOICED - NOT CANCELLED. And it seems that every piece of this transaction generates a new "order" , "case" or some other "reference #" - none of which are tied together, except by the invoice amount, when it is mentioned - which it typically IS NOT.
My question, then, is : How can I get past this absolute frustration over every aspect of my interaction with Adobe and GET THIS TAKEN CARE OF?????????Hi Stacy,
What frustration? (Just kidding !)
As I mentioned, one of the two charges has been refunded. Credited by
Adobe on Jan 28, I believe I received it in my bank on Jan 30.
The other charge, $25.37 of order # AD011017507, has not been received
by my bank yet. But this can't be that much of a surprise, and has nothing
to do with "10 business days" for refunds to post.
To this minute, "My Orders" on Adobe website shows that the order #
AD011017507 was invoiced on January 22, but that no credit invoice has been
posted against this order to this moment!
Can you begin to understand the frustration of being unable, through
all attempts to untangle this mess, starting within one hour of the original
order, with I believe nine different "Chats", telephone calls and, finally
a "problem" posting, stretching over more than thirteen days. Of course
it doesn't make much sense to devote this much attention to less than $50
worth of stuff, but I do not let things like this dangle.
And can you imagine how loathe I am to deal with Adobe for fear of
some real problem?
At any rate, I would certainly be pleased if you can suggest a way for
me to extricate myself from this. Any help would be GREATLY appreciated!
Thanks for your time and any trouble,
Stephen Ellis
<removed by admin>
In a message dated 2/3/2014 4:08:59 P.M. Eastern Standard Time,
[email protected] writes:
Re: How do I get a refund on Export PDF that has ALREADY been agreed
created by StacySison (http://forums.adobe.com/people/StacySison) in
Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/6082008#6082008) -
how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?
jen19 wrote:
how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?
Just buy something. -
How can I verify credit for an itunes card that has already been redeemed? My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?
Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to) -
My CS6 program that has never had a problem before, is not telling me that there is an error and that it "unexpectedly quit" when I simply try to launch the program. I have restarted my computer several times. It does the same thing each time. So then I tried uninstalling the program and re-installing. It said that it could not install due to an error. So I STILL can't launch my program. I don't know what to do. Any help would be appreciated. I have to edit photos for a photoshoot and return them tomorrow. :/
Reset Photoshop's Preferences?
Your Photoehop preferences will survive un-installing and re-installing Photoshop...... -
HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED
제품 : FIN_GL
작성날짜 : 2006-05-30
HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED
===============================================================
PURPOSE
이미 Reverse된 원 Journal을 Reverse전 상태로 돌리고 싶을??
Explanation
아래와 같이 원 Journal의 reference를 끊으면 원 상태로 복수시킬수 있다
Example
update gl_je_headers
set accrual_rev_je_header_id = '',
accrual_rev_period_name = '',
accrual_rev_status = ''
where je_header_id = <YOUR JOURNAL ENTRY'S JE_HEADER_ID>
Reference Documents
Note 1031929.6Hi there,
Not exactly sure what you wanna do... but here is what I've understood...
You can remove any old Transport Set in your Portal by going to the Browser Transport Sets within the Builder page over the Administer tab.
As to import a new Transport Set into the Production server, what I suggest is that you make a valid backup (so that in case you have any problem it is easier to revert back) and later on override it (or if it is a major change, it would be better to drop the Page Group and reimport it clean) or import it clean to your Production server. Validate all things... and that's it.
I hope it helps...
Cheers,
Pedro.
Maybe you are looking for
-
In Attachement List Services for Objects White Screen when I Display a Note
Hi Expert, Need your assistance. I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed: 1. Go to FK03 2. Open a Vendor 3. Click the Services for Objects 4. A
-
Safari no longer boots up to homepage!
My Safari is set to boot up into my homepage, but since I installed Lion it boots up to the last web page I was on! I have checked my settings and they're fine. It's not a major problem, it's just really irritating me! Anyone else had this problem, o
-
SQL Server 2014 Developer Edition
Microsoft is no longer offering version 2012 developer edition. So, is SQL Server 2014 developer edition ok to use with SQL Server 2012? Thanks.
-
I Was trying to update my apps when i got a sign in required alert, i signed in and it took me to my account settings ]it said there was a prob with a previous purchase and i havent purchased anything?
-
I'm trying to compile the sample file and get this error while using Centos5 gcc stringecho.c -O3 -Wall -swc -o stringecho.swc /usr/local/alchemy/bin/llvm-gcc4-ubuntu-install/bin/../libexec/gcc/i686-pc-linux-gnu/4.2.1 /cc1: /usr/lib/libstdc++.so.6: v