How to restart a TDMS PEM block?

Hello,
I’m using TDMS PEM ( Process execution Manager) and I have 4 groups of block activities. In the third group I have the Data Transfer Block that stopped with the duplicated key error. I have fixed this error and now I want to restart the Data transfer block, but I can’t see how.
I have two more activities in this block, I can start the activities individually, but I want to keep going with the PEM automation.
If I select the block ID Data Transfer I have the “stop execution” button enabled, the “schedule execution” button disabled and the “status process Execution” button enabled.
How can I restart the block execution?
Thanks in advance and Best Regards,
Walde Requena

Hello Walde Requena,
When you click on the Block name(it appears as a hyperlink) eg: "Data Transfer 04/05", you will be able to see the activities grouped under it.
You need to resolve the duplicate key issue before you proceed.
You can run the troubleshooter "Change Technical settings for migration objects" and change the "write behaviour" of the failed migration objects to "Modify".
Once this is done, you can click on "start Execution" in the PEM tab.
The PEM engine will make an attempt to restart the failed activities. Then data transfer should get over for the failed objects.
Then the next activities will also get scheduled and completed.
Let me know if i have answered your question.
Best Regards,
Madhavi

Similar Messages

  • How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

    I store different channels in a TDMS file.
    I like to have a time channel at the first position with group index 1 and number 1.
    When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
    Here are my questions:
    How does DIADEM import TDMS files?
    How gets every channel his number and groupindex?
    How can I determine which channel has which groupindex and number?
    Best regards
    Joerg

    Hi Jörg,
    i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
    Did you use the library for creating *.tdms files like in the link ?
    http://zone.ni.com/devzone/cda/tut/p/id/6471
    Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
    when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
    When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
    german version download link
    https://lumen.ni.com/nicif/d/lveval/content.xhtml
    english version download link
    https://lumen.ni.com/nicif/us/lveval/content.xhtml
    Hope it helps
    Best Regards

  • How can I get a detail block to requery after a database change?

    Hi, I have a master/detail form. When the status of the master record changes, I need to update a date in one of the detail records. If I use SQL to update the detail row in the database in the ON-CHANGE trigger of the master block, how can I get the detail block to requery to show the change? When I try doing a go_block from any of the ...UPDATE triggers, it says it is restricted.

    wjpenfold,
    Do you have a "Relationship" defined between your Master and Detail blocks? If so, you simply need to requery your master block and the detail block will automatically be requeried. If you can't use a relationship, then you can use can create a timer in the trigger that updates the database and then in the When-Timer-Expired (WTE) trigger you can go to the detail block and execute a query. For example:
    /* Sample On-Change trigger */
    DECLARE
       timer_id  TIMER;
    BEGIN
    ....your code here that performs the update....
       /* Now create an instance of a timer */
       timer_id := Create_Timer ('upd_detail',1,NO_REPEAT);
    END;
    /* Sample Form Level When-Timer-Expired trigger */
    DECLARE
       timer_id   TIMER;
    BEGIN
       -- Find the timer first
       timer_id := FIND_TIMER('upd_detail');
       IF NOT ID_NULL(timer_id) THEN
          GO_BLOCK('DETAIL_BLOCK');
          Execute_Query;
       END IF;
    END;Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Oracle Forms - How can I create a Data Block with query

    Dear friends I have a question, I couldn't do this..
    I have a sql query, I want to show the datas of the query.. How can I do this. ?
    Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
    Semih

    Hi,
    You have two options
    1. create a view and base the block on the view
    2. create a block with a query Data Source Type of 'FROM clause query'
    Hope this helps
    Neil

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • How to turn off pop-up blocker

    How to turn off pop-up blocker?

    Are you speaking of the one in the Firefox browser or Firefox OS?
    * Desktop Browser: [[Pop-up blocker settings, exceptions and troubleshooting]]

  • How do i turn pop up blocker on or off

    how do i turn pop up blocker on or off

    What OS are you using?  OS 8.6, 9.2, 10.2, 10.3, 10.4, 10.5, 10.6, 10.7, 10.8?
    What browser Safari, Firefox, TenFourFox, Chrome?
    What version of the browser?  Click on "Safari" in the upper lefthand corner of the browser's window, pull down to "About Safari", a small window will open telling you what version of Safari you're using.  Same goes for Firefox, Chrome, etc.
    Generally, if when you click on "Safari" or "Firefox" in the upper lefthand corner, if you don't see "Block Pop-up Windows" listed, try clicking "Preferences", and check through the settings there for it.
    Good luck.

  • HT4061 My iPhone 4 has been recently stolen :( and I am wondering how can I be able to blocked my iPhone 4 so the one steal it cannot use my phone pls let me know what to do thanks.

    My iPhone 4 has been recently stolen :( and I am wondering how can I be able to blocked my iPhone 4 so the one steal it cannot use my phone pls let me know what to do thanks.

    Apple does not get involved with lost or stolen items.  A carrier may offer IMEI blocking (non in the USA currently do, but elsewhere some do).  Your carrier would already know your IMEI number anyway, so just contact them and ask them about it.
    It is VERY good that you had a passcode lock on the device.  That means your personal information will be safe.  And yes, after 10 failed attempts (each with increasing time out between allowing another attempt) the device will permanently lock them out until they restore the device in iTunes.  Anyone can go ahead and restore your iPhone as new in iTunes, but that also wipes everything off it and restores it to new condition - which does mean they can go off and use it as theirs, but at least all your data is gone.
    Did you file a police report it was stolen?  Also your carrier should be told (and ask them about IMEI blocking).  Sorry it is gone, but you did the best thing possible to protect yourself and your information when you set up that passcode lock.

  • Outbound process red flag - how to restart?!

    Hi, well i tried in a previous post to get help but i guess it was a little misunderstanding.
    I have a well processed message but it's not being send to target system, so i get a red flag on column outbound status in SXI_MONI. It's like a system is not available but in this case it is.
    It is File to IDoc Scenario and be sure that i already checked SM59, SX1, SX2 and so on.
    Funny thing is that sometimes message is send properly - when CC read one file - but when it has to read >1 outbound status will be set to error for each message!
    has somebody any clue on this issue?!
    br!!

    Hi,
    it's a FILE2IDoc Scenario i am getting no error at all except of the red flag for outbound process. In detal-view of the message nothing is reported an even the CC-Monitoring is showing nothing because IDoc-Adapter is not part of the Adapter-Engine.
    That's the problem! Because a target systems is connected via VPN to the gateway of the XI. And when the VPN is not active, the message is not being transmitted. But in XI i connat restart it when VPN-Tunnel is active again.
    Any clue on how to restart?!
    br

  • How to restart an workflow if ended in error at SEND Mail step.

    Hello All
          I am facing some problem in restarting the error workflow.
    Issue is:
       Workflow ended in error at the mail notification step, since the mail id is not filled into the container so there is no address (mail id) and ended in error.
       How to restart these kinds of workflow in the system?, we have tried to change the container value by assigning mail id and restarted the workflow but still went into error.
    Is it possible to restart an workflow which ended in error other than rule resolution.
    Regards
    Anand KS

    I think you went in the write approach. I think you have to change the container properly by populating the ADDRESSTRING container element. Also check whether type of email recipient in your container is et to Email.
    Thanks
    Arghadip

  • How to read particular Sector and Block in Mifare 1k through Java?

    Hi Friends..
    Do you know how to read particular Sector and Block in Mifare 1K through Java?..
    I've created the simple application that read data from Mifare 1K, but i've problem when i want to read the other sectors and blocks..
    i tried to read the blocks by using this APDU command :
    FF B0 00 00 10  //read data in Sector 0 and Block 0
    FF B0 00 01 10  //read data in Sector 0 and Block 1
    FF B0 00 02 10  //read data in Sector 0 and Block 2
    FF B0 00 03 10  //read data in Sector 0 and Block 1How to read the other sectors and blocks?..
    I've tried to read data in Sector 1 and Block 5, so i tried to send this APDU command : FF B0 01 05 10, but i got this error : *6986*
    Actually, it doesn't matter if i use MifareWnd, but i want to create my own application that Read/Write From/into Mifare 1K..
    Please help me regarding this..
    Thanks in advance..
    Edited by: Leonardo_Carreira on Mar 31, 2010 2:47 AM
    Edited by: Leonardo_Carreira on Mar 31, 2010 2:50 AM

    Hi Sidd,
    You should check out the Example Finder under Hardware Input and Output»IMAQ»Signal Input and Output for examples of triggering in framegrabbers.
    Stephen Meserve
    National Instruments

  • How do I update Pop-up blocker settings on my iMac

    How do I update Pop - up blocker settings on my iMac?

    Launch the App Store on your iMac. Then click Updates from the menu top of the App Store window.
    You can access the App Store from your Apple menu, your Dock or your Applications folder.
    You should not have to sign into iCloud to do this...

  • How to restart WorkItem if the status is completed

    Hello,
    Due to my mistake in PRD not in DEV i changed the WI status from started to completed.
    Now i have 110 WI affected and i dont know how to restart them, or make them finish normaly the right path.
    In the LOG i can see: Execution was ignored (work item has final status)
    Area: SWF_RUN
    Msg: 568
    Regards
    Laurynas Prikockis
    Edited by: Laurynas Prikockis on Apr 15, 2009 7:59 AM

    Resetting the status of a completed workitem? I think it is not possible , because you can reset the status of a workitem which is in in process state to ready state or the workitem which is in error state( May be not sure) but the status of completed workitem , not possible, because the workitem will not be in any of the users inbox.
    But will let you  know , if there is any possiblity
    Check this error when I tried to reset the status of workitem which is completed by using the FM
    SAP_WAPI_SET_WORKITEM_STATUS
    Status change from COMPLETED to READY is not allowed/possible

  • HT4759 my ipad is disabled.how to restart

    due to wrong passcod my i pad is disabled..please advice or suggest to how to restart my i pad

    Hi gibachonga,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Judy

  • How to restart the J2EE Engine

    I ran a couple tests the other day, and the next time I looked the J2EE Engine was down.  (Could not send or receive PTP messages to it).
    When I brought up the J2EE Engine Administrator, it put upt the following help box:
    <b>Unable to lookup connection default
    http:host1:8101/msgserver/text/login returned empty list of connection parameters</b>
    I had to reinstall to get it to work.
    Does anyone know how to restart the J2EE engine ?
    Thanks, John

    Hi,
    judging by the URL given in the error message (which is a URL that queries the message server), your engine must be of 6.40 version. Well, on 6.40 you should have the SAP Management Console (SAP MMC) that you can open and start the engine from. TO open it, go to Start -> Programs -> SAP Management Console. Inside, locate your SAP System, right-click on it and select Start.
    That's it.
    Just for a reference, <a href="http://help.sap.com/saphelp_nw04/helpdata/en/9b/dd7277f3e64ecba59f7fbac7edd2fe/frameset.htm">this</a> page contains also some screenshots of the MMC.

Maybe you are looking for